9,040
edits
Difference between revisions of "NVGate Specification"
Jump to navigation
Jump to search
no edit summary
(Created page with "==General description== The following specifications concern NVGate<sup>®</sup> software for OR34, OR35, OR36, OR38 and Mobi-Pack<sup>®</sup> multi-analyzer instruments. The...") |
|||
| Line 7: | Line 7: | ||
The FFT plug-in features specific add-on for specialized analysis. | The FFT plug-in features specific add-on for specialized analysis. | ||
<font color="#4DA836">'''NVGate'''<sup>'''®</sup> ''''''Platform''' | <font color="#4DA836">'''NVGate'''<sup>'''®</sup> ''''''Platform''' | ||
NVGate<sup>®</sup> platform provides a comprehensive set of tools for noise and vibration acquisition, recording and analysis. | NVGate<sup>®</sup> platform provides a comprehensive set of tools for noise and vibration acquisition, recording and analysis. | ||
| Line 19: | Line 19: | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Signal sources''' | ||
| | | | ||
=====Front-end ===== | =====Front-end ===== | ||
| | |Controls dynamic inputs, generators, external synchronization/tach. input and parametric (DC) inputs. | ||
|- | |- | ||
| | | | ||
=====Recorder===== | =====Recorder===== | ||
| | |Record and store time domain signal on analyzer or PC hard disc. Records dynamic, parametric (DC) and ext. synch/tach inputs with multiple frequencies. | ||
|- | |- | ||
| | | | ||
=====Player===== | =====Player===== | ||
| | |Visualize, listen, playback on output or generate signals for post-analysis purpose. Based on recorded or imported time domain signal file. | ||
|- | |- | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Shared resources''' | ||
| | | | ||
=====Filters===== | =====Filters===== | ||
| | |High/low pass, Band/Stop pass, single and double integrator, differentiator, A and C acoustic laws | ||
|- | |- | ||
| | | | ||
=====Events===== | =====Events===== | ||
| | |Edge detection, DC levels, Delta DC levels, RPM, Delta RPM, Manual, Time period, combinations. | ||
|- | |- | ||
| | | | ||
=====Weighting windows===== | =====Weighting windows===== | ||
| | |Programmable Force and response, Hanning, Hamming, Kaiser Bessel, flat-top, uniform. | ||
|- | |- | ||
| | | | ||
=====Tachometers===== | =====Tachometers===== | ||
| | |Compute RPM from ext. sync and input pulses, DC, CAN. Fractional, simulated and combined tach. | ||
|- | |- | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Operational tools''' | ||
| | | | ||
=====Transducers management ===== | =====Transducers management ===== | ||
| | |Automatic calibration, database management, calibration history, automatic setup of inputs, TEDS management. | ||
|- | |- | ||
| | | | ||
=====Masks===== | =====Masks===== | ||
| | |Mask editor for spectra, profiles, 1/n octave, order spectra | ||
|- | |- | ||
| | | | ||
=====Report===== | =====Report===== | ||
| | |On-line report editor, automated report generation, word or Excel files. | ||
|- | |- | ||
| | |'''Automation''' '''tools''' | ||
| | |Macros, sequence from Excel<sup>®</sup> sheet, alarms based on mask comparison, customizable control panel, restricted user profiles, remote controller interface. | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''General purpose analysis''' | ||
| | | | ||
=====Monitor===== | =====Monitor===== | ||
| | |4 channels FFT analyzer with input hot swap. Statistical extraction (RMS, Max, Min, Kurtosis) from time domain with programmable band-pass filter. | ||
|- | |- | ||
| | | | ||
=====Waterfall===== | =====Waterfall===== | ||
| | |Synchronized stack for 2D (spectra) and scalar (order, overall). 3D, color map and profiles displays. Extraction capabilities. | ||
|} | |} | ||
<font color="#4DA836">'''NVGate'''<sup>'''®</sup> ''''''Plug-ins analyzers''' | <font color="#4DA836">'''NVGate'''<sup>'''®</sup> ''''''Plug-ins analyzers''' | ||
In addition to the standard functions featured in the software platform, NVGate<sup>®</sup> can receive additional plug-in analyzers that offer flexible configuration of independent analysis modes. | In addition to the standard functions featured in the software platform, NVGate<sup>®</sup> can receive additional plug-in analyzers that offer flexible configuration of independent analysis modes. | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center"| | |align = "center"|'''FFT''' | ||
| | |'''Fast Fourier Transform''' - Time to Frequency conversion with multiple average domains, combinable trigger, zooms and cross functions. | ||
| | |General-purpose frequency analysis, machinery signature, modal analysis acquisition (hammer or shaker), machinery diagnostic. | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''FFT Add-ons''' | ||
| | | | ||
| | | | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''CBT''' | ||
| | |'''Constant Band Tracking''' - Order extraction at constant bandwidth | ||
| | |Gears mesh analysis, gearboxes noise and vibration tracking. | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''FFTDiag''' | ||
| | |'''Cepstrum, Auto '''and cross '''correlation''', '''DC''', '''Min/Max, Pk, pk/pk '''and '''crest factor'''. | ||
| | |Set of functions dedicated to the diagnostics of industrial machineries. | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''TDA''' | ||
| | |'''Time Domain Analysis''' –Time view (oscilloscope). True statistical extraction, averaging. | ||
| | |Machinery diagnostic, long term acquisition monitoring, critical acquisition control, large structure damping control, shocks determination, machinery health control, trend analysis. | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''SOA''' | ||
| | |'''Synchronous Order Analysis''' - Time to Order re-sampling with angle or order averaging, acoustic weightings, multiple tach management. | ||
| | |Rotating machinery balancing. In vehicle order to noise correlation R&D. Pump, compressors, turbines and speed reducer/multiplier test. | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''SOADiag <br>(SOA Add-on)''' | ||
| | |'''Copstrum™, '''Auto''' '''and cross '''correlation''', Revolution '''synchronous statistics''', Order transmission Function ('''ORF™'''), '''X''' functions | ||
| | |Set of diagnostic functions based on the synchronous order analysis for rotating part transmission and forced vibration extraction. | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''OCT''' | ||
| | |'''1/n Octave Constant Percentage Band filters''' - 1/n octave detectors set with multiple averaging modes. | ||
| | |General-purpose industrial noise analysis. Vehicle acoustics R&D. Noise test. | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''OVA''' | ||
| | |'''Overall Acoustics Detectors''' - 3 detectors <nowiki>+</nowiki> 1 peak detection per channel with parallel averaging and acoustic weightings. | ||
| | |Industrial acoustic, sound power measurements. Machinery with cycles, R&D and test. | ||
|} | |} | ||
<font color="#4DA836">'''NVGate'''<sup>'''®</sup> ''''''Options''' | <font color="#4DA836">'''NVGate'''<sup>'''®</sup> ''''''Options''' | ||
Beside the plug-ins analyzers and their add-on, the 3-Series analyzers software features options: | Beside the plug-ins analyzers and their add-on, the 3-Series analyzers software features options: | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" bgcolor = "#D9D9D9"| | |align = "center" bgcolor = "#D9D9D9"|'''IVC''' | ||
|bgcolor = "#D9D9D9"| | |bgcolor = "#D9D9D9"|Instantaneous angular velocity converter | ||
|bgcolor = "#D9D9D9"| | |bgcolor = "#D9D9D9"|Torsional measurements from Ext. Synch inputs | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''CTE''' | ||
| | |Combined Tachometer editor | ||
| | |Tachometer math editor - 2 inputs, 1 output | ||
|- | |- | ||
|align = "center" bgcolor = "#D9D9D9"| | |align = "center" bgcolor = "#D9D9D9"|'''VIN''' | ||
|bgcolor = "#D9D9D9"| | |bgcolor = "#D9D9D9"|Virtual Inputs | ||
|bgcolor = "#D9D9D9"| | |bgcolor = "#D9D9D9"|Real-time math combination of dynamic inputs | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''VDC''' | ||
| | |Virtual DC | ||
| | |Real-time math combination of parametric inputs | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''A-Samp''' | ||
| | |Angular sampling for SOA | ||
| | |Real-time Angular sampling of inputs | ||
|} | |} | ||
<font color="#4DA836">'''PC requirements''' | <font color="#4DA836">'''PC requirements''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" bgcolor = "#D9D9D9"| | |align = "center" bgcolor = "#D9D9D9"|'''Minimum''' | ||
|bgcolor = "#D9D9D9"| | |bgcolor = "#D9D9D9"|1 GB<ref>) Waterfall depth depends on available memory. </ref> of RAM / 250 MB free on HD <nowiki>+</nowiki> storage for measurements and signals / 1024 x 768 display | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Recommended'''<br>'''(for laptop)''' | ||
| | |'''Dual/quad core processor''' (e.g.: Intel Core i5) / <nowiki>></nowiki> 2.5 GHz / '''4 GB''' of RAM / GPU / 1368 x 768 display / 1 GB free on HD <nowiki>+</nowiki> storage for signals | ||
|- | |- | ||
|align = "center" bgcolor = "#D9D9D9"| | |align = "center" bgcolor = "#D9D9D9"|'''Recommended'''<br>'''(for desktop)''' | ||
|bgcolor = "#D9D9D9"| | |bgcolor = "#D9D9D9"|'''Quad core processor''' (e.g.: Intel Core i7) / '''6 GB''' of RAM / GPU / '''1920 x 1080 display''' / 1 GB free on HD <nowiki>+</nowiki> storage for signals | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Connections''' | ||
| | |Type: '''Ethernet 100/1000 BASE-T''', 1 Gb/s : Connector: '''RJ45'''<br>For removable disk: '''USB 3.0''' / For dongle key: '''USB 2.0''' | ||
|- | |- | ||
|align = "center" bgcolor = "#D9D9D9"| | |align = "center" bgcolor = "#D9D9D9"|'''Operating systems''' | ||
|bgcolor = "#D9D9D9"| | |bgcolor = "#D9D9D9"|Windows '''Vista '''Service Pack 2 / Windows''' 7 '''/ Windows''' 8''' & '''8.1 / MS Office 32 bits''' only | ||
|} | |} | ||
1) | 1) Waterfall depth depends on available memory. Minimum configuration does not allow waterfall storage. | ||
==Signal sources== | ==Signal sources== | ||
| Line 202: | Line 202: | ||
The front-end module gathers the different input and output settings available in the instrument unit. In addition, the front-end module generates virtual signals (synthesized) when running the office mode (no unit connected to the PC) which is useful for set-up. | The front-end module gathers the different input and output settings available in the instrument unit. In addition, the front-end module generates virtual signals (synthesized) when running the office mode (no unit connected to the PC) which is useful for set-up. | ||
<font color="#4DA836">'''Front-end settings''' | <font color="#4DA836">'''Front-end settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|rowspan = "10"| | |rowspan = "10"|'''Dynamic inputs''' | ||
| | |Sampling clock | ||
| | |'''102.4 kS/s to 2,048 S/s''' or '''65.536 kS/s to 3,200 S/s''' | ||
|- | |- | ||
| | |LEMO<ref>Optional features</ref> connectors management | ||
| | |'''200 V '''polarization''' on/off''' per block of 8 input | ||
|- | |- | ||
|$$DeleteCell$$$$DeleteCell$$ | |$$DeleteCell$$$$DeleteCell$$ | ||
| | |Coupling<ref>Independent for each input</ref><sup>,4</sup> | ||
| | |'''AC''' (0.35 Hz) - '''DC''' - '''ICP''' - '''ICP <nowiki>+</nowiki> TEDS''' - '''AC float -''' '''DC float''' - '''Grounded''' | ||
|- | |- | ||
| | |Node information<sup>3</sup> | ||
| | |'''Label''' - '''component''' - '''node''' - '''direction''' (± X ,Y,Z) - '''type''' (translation, rotation) | ||
|- | |- | ||
| | |Physical quantity<sup>3,4</sup> | ||
| | |Any physical quantity can independently be associated to inputs. | ||
|- | |- | ||
|$$DeleteCell$$$$DeleteCell$$ | |$$DeleteCell$$$$DeleteCell$$ | ||
| | |Sensitivity<sup>3,<ref>Linked with the transducer database</ref></sup> | ||
| | |User defined in '''V/unit.''' | ||
|- | |- | ||
| | |Range<sup>2</sup> | ||
| | |'''Pk to pk''' expressed in the associated unit, (taking in account sensitivity) - '''linear '''or '''dB''' | ||
|- | |- | ||
| | |External conditioner compensation<sup>3</sup> | ||
| | |'''Gain''' - '''polarity''' - '''offset'''. | ||
|- | |- | ||
|| | ||Filter<sup>3</sup> | ||
| | |'''Any NVGate''' filter can independently be applied to each dynamic input (See Filters §) | ||
|- | |- | ||
|| | ||Auto-range | ||
| | |Enable/disable auto-ranging independently on any input | ||
|- | |- | ||
|rowspan = "13"| | |rowspan = "13"|'''Ext. sync inputs''' | ||
| | |Sampling | ||
| | |over-sampled 64 time the dynamic inputs sampling | ||
|- | |- | ||
| | |Coupling<sup>3</sup> | ||
| | |'''AC''' (0.35 Hz) - '''DC''' | ||
|- | |- | ||
| | |Information<sup>3</sup> | ||
| | |Label | ||
|- | |- | ||
| | |Physical quantity<sup>3,4</sup> | ||
| | |Any physical quantity can be associated to inputs. | ||
|- | |- | ||
| | |Sensitivity<sup>3,4</sup> | ||
| | |User defined in '''V/unit'''. | ||
|- | |- | ||
| | |Range<sup>3</sup> | ||
| | |'''Pk to pk''' expressed in the associated unit, (taking in account sensitivity) - '''linear or dB''' | ||
|- | |- | ||
| | |External conditioner compensation<sup>3</sup> | ||
| | |'''Gain''', '''offset'''. | ||
|- | |- | ||
| | |Edge detection<sup>3</sup> | ||
| | |'''Threshold''' (in associated unit) - '''Edge''' (rise, fall) - '''Hystersis''' - '''hold off''' (sec) | ||
|- | |- | ||
| | |Pre-divider<sup>3</sup> | ||
| | |'''Hardware - 1''' to '''255 '''pulses – accept up to '''375 kpulses/sec''' | ||
|- | |- | ||
| | |Post-multiplier<sup>3</sup> | ||
| | |'''1 to 50 pulses/trigger '''- Generate higher frequencies on low rate triggers. (ex. GPS) | ||
|- | |- | ||
| | |Tachometer mode<sup>3</sup> | ||
| | |'''Pulse per rev''': 0.5 to 4096 - '''average''' (n rev) - '''min''' (detect stopped shaft) and '''max RPM''' speed - '''hold off '''(in % of revolution) - '''rotation''' (clockwise/counterclockwise) | ||
|- | |- | ||
| | |Torsional mode<sup>2</sup>: Instantaneous angular velocity converter | ||
| | |'''Pulse per rev''': 1 to 4096 - '''min''' (detect stopped shaft) and '''max RPM''' speed - '''sliding''' '''average''' (1 to 20 samples) - '''Missing pulse number''': 0 to 5, '''Missing pulses detection''' :1 to ±20%: of previous pulses duration- '''Filters''' (dt, dt², 1/dt) | ||
|- | |- | ||
| | |Angular sampling<sup>2</sup>: multi-pulse/rev clock used for signal sampling | ||
| | |for '''SOA''' - '''Pulse per rev''': 1 to 4096 continuously (no power of 2 limitation) - Real time, in line '''anti-aliasing''' - '''Missing pulse number''': 0 to 5, '''Missing pulses detection''': 1 to ±20% of previous pulses duration – '''Phase reference''': Any tachometer including same input | ||
|} | |} | ||
| Line 306: | Line 306: | ||
---- | ---- | ||
<font color="#4DA836">'''Front-end (continued)''' | <font color="#4DA836">'''Front-end (continued)''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "10"| | |align = "center" rowspan = "10"|'''Outputs''' | ||
| | |Sampling | ||
| | |Same as dynamic inputs | ||
|- | |- | ||
| | |Generated signals<sup>3</sup> | ||
| | |Any '''outputs signals''', see §outputs - play-back of signal file tracks - DC levels - Inputs playback (Delay <nowiki>></nowiki> 256 samples) | ||
|- | |- | ||
| | |Filters<sup>3</sup> | ||
| | |'''Any NVGate''' filter can independently be applied to each dynamic output (See Filters §) | ||
|- | |- | ||
| | |Impedance<sup>3</sup> | ||
| | |'''50 ''', '''600 ''' (only OR36 and 0R38) or grounded | ||
|- | |- | ||
| | |Gain<sup>3</sup> | ||
| | |'''-100 dB''' to '''<nowiki>+</nowiki> 120 dB''' | ||
|- | |- | ||
| | |Synchronization<sup>3</sup> | ||
| | |'''Free run '''or '''linked '''to acquisitions '''runs''' | ||
|- | |- | ||
| | |Level and phase transition<sup>3</sup> | ||
| | |No ('''Steps''') - controlled ('''ramp''') - user selectable ramp time | ||
|- | |- | ||
| | |Clipping | ||
| | |User selectable - '''protects shaker''' and '''amplifier'''. | ||
|- | |- | ||
| | |Events (can trig analysis or record)<sup>3</sup> | ||
| | |Outputs '''stabilized''' - new '''step reached''' - '''start & stop sweep''' | ||
|- | |- | ||
| | |Controls | ||
| | |'''Emergency stop''' - '''mute'''/un-mute all | ||
|- | |- | ||
|align = "center" rowspan = "7"| | |align = "center" rowspan = "7"|'''Parametric'''<sup>'''1</sup> ''''''(DC) inputs''' | ||
| | |Sampling | ||
| | |'''12.3 to 12,8 S/s - '''10 Hz to 100 Hz harmonics rejection | ||
|- | |- | ||
| | |Information<sup>3</sup> | ||
| | |Label | ||
|- | |- | ||
| | |Physical quantity<sup>3,4</sup> | ||
| | |Any physical quantity can be associated to inputs. | ||
|- | |- | ||
| | |Sensitivity<sup>3,4</sup> | ||
| | |User defined in V/unit. | ||
|- | |- | ||
| | |Range<sup>3</sup> | ||
| | |Pk to pk expressed in the associated unit (taking in account sensitivity) - '''linear''' or '''dB''' | ||
|- | |- | ||
| | |External conditioner compensation<sup>3</sup> | ||
| | |'''Gain '''(-120 dB to <nowiki>+</nowiki>20 dB)''' ''' - '''polarity''' - '''offset '''(<nowiki><</nowiki> range). | ||
|- | |- | ||
| | |Auto-range | ||
| | |'''Enable/disable''' auto-ranging '''independently on any input''' | ||
|- | |- | ||
|align = "center" rowspan = "5"| | |align = "center" rowspan = "5"|'''Auto-ranging''' | ||
| | |Type | ||
| | |'''Normal''' - on '''Peak''' detection | ||
|- | |- | ||
| | |Margin | ||
| | |Select the first highest range with '''0 dB - 3 dB''' or '''20 dB''' margin | ||
|- | |- | ||
| | |Duration (apply for normal auto-range) | ||
| | |'''0''' to '''10 sec'''. | ||
|- | |- | ||
| | |Peak detection | ||
| | |User select input were to detect peak, auto-range applies on all enabled input at each peak detection. | ||
|- | |- | ||
| | |Peak parameters settings | ||
| | |''' 1 to 10 '''peaks - '''sensitivity''' (low, normal, high) - '''rise''', '''fall''' or '''any edge'''. | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Checking''' | ||
| | |ICP<ref>For OR36, OR38 and Mobi-Pack only</ref> | ||
| | |Test and report ('''Open''', '''shortcut''', '''ok''') all enabled inputs. | ||
|- | |- | ||
| | |TEDS | ||
| | |Transducers automatic recognition - Complies with '''IEEE 1451.4 2004 Rev. 1.0''' | ||
|} | |} | ||
<font color="#4DA836">'''Front-end results &''' connections'''''' | <font color="#4DA836">'''Front-end results &''' connections'''''' | ||
The following results are available for monitoring and connection to analysis mode (plug-in analyzers) | The following results are available for monitoring and connection to analysis mode (plug-in analyzers) | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Dynamic inputs & torsional'''<sup>'''1</sup> ''''''inputs''' | ||
| | |Monitoring<sup>3</sup> | ||
| | |Time domain instantaneous signal - Size '''256 samples''' | ||
|- | |- | ||
| | |Status led<sup>3</sup> (docking tool bar) | ||
| | |'''Overloaded''' = red - '''overload''' '''occurred since last start''' = red with yellow center - '''ok''' = green - '''under load''' (20 dB below range) = green with yellow center | ||
|- | |- | ||
| | |Connection<sup>3</sup> | ||
| | |To any: '''plug-in analyzer''' '''channel, monitor''' '''channel, Virtual inputs''', '''recorder''' '''track''', '''edge event detector''' & '''tachometer ''' | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Ext. Sync inputs ''' | ||
| | |Monitoring<sup>3</sup> | ||
| | |Time domain '''instantaneous status''' (1 = threshold crossed, 0 = no event) - Size '''256 samples'''. | ||
|- | |- | ||
| | |Connection<sup>3</sup> | ||
| | |To any: '''start '''or''' stop averaging''' of plug-in analyzers, recorder '''start '''or''' stop recording''', '''waterfall start '''or''' stop acquisition''', '''new block trigger''' for FFT and SOA and '''new slice '''for''' waterfall''' acquisition.<br>To '''torsional''', '''tachometer''' & '''angular sampling''' | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Parametric'''<sup>'''1</sup> ''''''(DC) inputs & CAN'''<sup>'''1</sup> ''''''parameters''' | ||
| | |Monitoring<sup>3</sup> | ||
| | |'''Profiles''' versus time ('''160 ms to 163 sec''' user selectable), and '''digital'''/'''analog view meter'''. | ||
|- | |- | ||
| | |Status led<sup>3</sup> | ||
| | |'''Overloaded''' = red - '''ok''' = yellow - '''under load''' (20 dB below range) = Cyan | ||
|- | |- | ||
| | |Connection<sup>3</sup> | ||
| | |To any: '''recorder track''', '''waterfall reference (Z/X axis)''' and '''profiles''', '''level''' '''delta level detectors''' and '''virtual DC''' | ||
|} | |} | ||
| Line 463: | Line 463: | ||
* '''Time and tracks split''', the chosen recorded tracks (from signal file) are played back in the recorder using the post-analysis mode. The sampling frequency, duration, and/or track arrangement can be changed. | * '''Time and tracks split''', the chosen recorded tracks (from signal file) are played back in the recorder using the post-analysis mode. The sampling frequency, duration, and/or track arrangement can be changed. | ||
<font color="#4DA836">'''Recorder settings''' | <font color="#4DA836">'''Recorder settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Bandwidths''' | ||
| | |Dynamics inputs | ||
| | |'''2 groups''' of user selectable sampling frequency - From '''102.4 kS/s '''to '''2.048 S/s''' ('''40 kHz''' to '''800 mHz''') - available simultaneously | ||
|- | |- | ||
| | |Ext. sync inputs | ||
| | |'''Automatic selection''' at Front-end sampling frequency - Resolution is '''64 time Front-end sampling frequency''' | ||
|- | |- | ||
| | |Parametric (DC) inputs | ||
| | |'''12.5 S/s''' ('''50 Hz''' rejection) - '''15 S/s''' ('''60 Hz''' rejection) | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Tracks''' | ||
| | |Number | ||
| | |'''14 tracks<ref>For OR34, OR35 and Office-8 licenses.</ref>''' (8 <nowiki>+</nowiki> 6 ext. sync) or '''38 tracks<ref>For OR36, OR38 and Office licenses.</ref>''' (32 <nowiki>+</nowiki> 6 ext. Sync)<br>Sum of connected licenses using multiple hardware | ||
|- | |- | ||
| | |Saved settings / track | ||
| | |'''Label''' - '''Coupling''' - '''External gain''' - Input '''range''' - '''Sampling frequency '''and''' signal bandwidth - Component''' - '''Node''' number - '''Direction''' - '''Type''' - Associated '''transducer''' - '''Unit -''' '''Sensitivity''' and '''Offset''' compensation. | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Modes''' | ||
| | |Start to time | ||
| | |Start recording on run or any activated event - '''Stop recording when duration ends '''- Duration '''10 ms''' to '''available space on target HDD.''' | ||
|- | |- | ||
| | |Start to stop | ||
| | |'''Start recording''' on '''run''' or '''any activated event''' - Stop recording on stop on any activated event - Start and stop event can be the same - Duration '''10 ms''' to '''available space on active drive '''(PC or OR3x). | ||
|- | |- | ||
| | |Time to stop | ||
| | |Memorize the '''earliest x seconds''' - Stop = '''stop''' or any '''activated event''' - Duration '''10 ms''' to '''2 GSamples '''(limited by the drive available space) | ||
|- | |- | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Triggering''' | ||
| | |Start recording (new record) | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run''' | ||
|- | |- | ||
| | |Stop recording (end current record) | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run''' | ||
|- | |- | ||
| | |Start delay | ||
| | |Positive''' '''=''' unlimited''' - negative = '''128 kSamples''' | ||
|- | |- | ||
| | |Stop delay | ||
| | |Positive''' '''=''' unlimited''' - negative = '''0''' | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Markers''' | ||
| | |Saved in the record files | ||
| | |Added by tool bar or shortcut - '''comment fields''' editable during record or at end of acquisition | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Signal file''' | ||
| | |Record on PC HDD | ||
| | |Up to '''10''' dynamic inputs – Up to 4 parametric inputs - max total bandwidth '''512 kS/s''' - (2 MB/s) | ||
|- | |- | ||
| | |Record on Analyzer SSD | ||
| | |Up to '''40 channels''' (32 inputs <nowiki>+</nowiki> 6 ext. sync or DC)/instruments - max bandwidth '''3.2 MS/s''' (12.5 MB/s) | ||
|- | |- | ||
| | |Format | ||
| | |'''Normal''': '''32 bits'''/sample - '''Compressed''' '''16 bits'''/sample | ||
|} | |} | ||
<font color="#4DA836">'''Recorder settings (continued)''' | <font color="#4DA836">'''Recorder settings (continued)''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Management''' | ||
| | |Download | ||
| | |Discard Analyzer SSD on PC HDD''' - Batch download''' available - Rate '''4 MB/s''' | ||
|- | |- | ||
| | |Upload | ||
| | |Load PC HDD records on the analyzer SSD - Rate '''1.4 MB/s''' | ||
|- | |- | ||
| | |Location | ||
| | |All records accessible from the project manager tree | ||
|- | |- | ||
| | |Hard drive management | ||
| | |'''Format '''SSD - '''Selective delete''' - '''Sorting '''tools | ||
|} | |} | ||
<font color="#4DA836">'''Mobi-Disk'''<sup>'''TM'''</sup | <font color="#4DA836">'''Mobi-Disk'''<sup>'''TM'''</sup> | ||
OR36 Mobi-Pack and OR38 multi analyzers/recorders feature a removable hard drive with 2 ports: | OR36 Mobi-Pack and OR38 multi analyzers/recorders feature a removable hard drive with 2 ports: | ||
| Line 566: | Line 566: | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center"| | |align = "center"|'''Connection''' | ||
| | |1 to 8 Mobi-Disc<sup>TM</sup> | ||
| | |Up to '''8 Mobi-disc''' connected - Active Mobi-Disc: '''1''' (user selectable) - '''hot swap''' | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Transfer''' | ||
| | |Based on the USB 3.0 link | ||
| | |'''Download 15 MB/s''' | ||
|} | |} | ||
<font color="#4DA836">'''Recorder monitoring''' | <font color="#4DA836">'''Recorder monitoring''' | ||
The following displays are available during real-time or post-analysis. | The following displays are available during real-time or post-analysis. | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center"| | |align = "center"|'''RMS''' | ||
| | |Overall RMS / input | ||
| | |'''Digital '''or '''analog view-meter''' | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Signal''' | ||
| | |Real-time | ||
| | |'''Compressed view of entire''' recorded signals - Automatic update of time axis. | ||
|} | |} | ||
| Line 598: | Line 598: | ||
* '''Post-analysis''', the player tracks take place of the corresponding inputs (Dynamics, Ext. Sync and parametric) to be processed by the plug-in analyzers, recorder, trigger and tachometer | * '''Post-analysis''', the player tracks take place of the corresponding inputs (Dynamics, Ext. Sync and parametric) to be processed by the plug-in analyzers, recorder, trigger and tachometer | ||
* '''Playbacks''', the recorded dynamic input are generated on the instrument outputs simultaneously with standard analysis of the inputs. | * '''Playbacks''', the recorded dynamic input are generated on the instrument outputs simultaneously with standard analysis of the inputs. | ||
<font color="#4DA836">'''Player settings''' | <font color="#4DA836">'''Player settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "5"| | |align = "center" rowspan = "5"|'''Played section''' | ||
| | |File selection | ||
| | |NVGate<sup>®</sup> '''recorded files''' - '''Imported files''' - located on '''instrument SSD, Mobi-Dsic'''<sup>'''TM'''</sup> or on '''PC HDD'''. | ||
|- | |- | ||
| | |Record selection | ||
| | |'''Record number selection''' (for multi record files) | ||
|- | |- | ||
| | |Section definition | ||
| | |User selectable '''Start''' and '''stop offsets''' (in sec.) - available in the '''file overview window''' (marker and slider) | ||
|- | |- | ||
| | |Duration | ||
| | |'''Play backed duration''' (User information) | ||
|- | |- | ||
| | |Repeat | ||
| | |'''On/off''' - repeat continuously the selection (available only for playback on analyzer output) | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Mode''' | ||
| | |File swap | ||
| | |'''Swap loaded files with same tracks number''' - applies '''identical post-analysis''' setup to multiple files. | ||
|- | |- | ||
| | |Playback | ||
| | |Continuous or step by step (5 ms to 360,000 s) | ||
|- | |- | ||
| | |Bandwidth | ||
| | |All tracks at lowest frequency (compatible with all plugs-in) or initial record frequencies (no track mix in plugs-in) | ||
|- | |- | ||
|align = "center" rowspan = "5"| | |align = "center" rowspan = "5"|'''Tracks''' | ||
| | |Number | ||
| | |'''Up to 352 '''according to user<nowiki>'</nowiki>s fleet | ||
|- | |- | ||
| | |Type | ||
| | |'''Dynamic input''' record (2 sampling frequencies), '''parametric '''(DC) input record and '''ext. sync''' record. | ||
|- | |- | ||
| | |Fixed setting (information) / track | ||
| | |'''Label''', '''Coupling''', '''external gain''', input '''range''', '''sampling frequency '''and''' signal bandwidth''' | ||
|- | |- | ||
| | |Modifiable measurement point information settings (apply for post analysis or re-recording) / track | ||
| | |'''Component''' - '''node''' number - '''direction''' - '''type''' | ||
|- | |- | ||
| | |Modifiable settings (apply for post analysis or re-recording) / track | ||
| | |Associated '''transducer''' - '''unit''' - '''sensitivity''' - '''offset''' compensation | ||
|} | |} | ||
<font color="#4DA836">'''Player settings (continued)''' | <font color="#4DA836">'''Player settings (continued)''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Listening''' | ||
| | |File location | ||
| | |'''Analyzer HD''' - '''Mobi-Disk'''<sup>'''TM'''</sup> connected with USB or inside the analyzer - '''PC HD''' | ||
|- | |- | ||
| | |Playback | ||
| | |One track - from cursor position - repeat displayed signal | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Markers''' | ||
| | |Display | ||
| | |Recorded markers are available in the '''file overview''' | ||
|- | |- | ||
| | |Use | ||
| | |Set the start and stop playback offset (user selectable) | ||
|} | |} | ||
<font color="#4DA836">'''Player connections''' | <font color="#4DA836">'''Player connections''' | ||
The following table describes the available connections to the analysis modes (plug-in analyzers and recorder) during post-analysis operation: | The following table describes the available connections to the analysis modes (plug-in analyzers and recorder) during post-analysis operation: | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Dynamic inputs & torsional Tracks''' | ||
| | |Preview (multiple file simultaneously) | ||
| | |'''Entire file fast overview''' (pre-compressed at recording time) - '''Track contents''' preview, independently (multi-graph display) | ||
|- | |- | ||
| | |Monitoring (loaded file only) | ||
| | |'''Zoom '''on selected '''play-back section''' | ||
|- | |- | ||
| | |Connection3 (loaded file only) | ||
| | |To any: '''plug-in analyzer''' '''channel, monitor''' '''channel,''' '''recorder''' '''track''', '''edge event detector''' and '''tachometer ''' | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Ext. sync Tracks''' | ||
| | |Preview (multiple file simultaneously) | ||
| | |'''Entire file fast overview''' (pre-compressed at recording time) - '''Track contents preview''', independently (multi-graph display) | ||
|- | |- | ||
| | |Monitoring (loaded file only) | ||
| | |'''Zoom '''on selected '''play-back section''' | ||
|- | |- | ||
| | |Connection<sup>3 </sup>(loaded file only) | ||
| | |To any: '''start '''or''' stop averaging''' of plug-in analyzers, recorder '''start '''or''' stop recording''', '''waterfall start '''or''' stop acquisition''', '''new block trigger''' for FFT and SOA and '''new slice '''for''' waterfall''' acquisition.<br>To '''torsional''', '''tachometer''' & '''angular sampling''' | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Recorded parametric'''<sup>'''1</sup> ''''''(DC) inputs & CAN parameters''' | ||
| | |Preview (multiple file simultaneously) | ||
| | |Entire file''' fast overview''' - '''Track contents''' preview | ||
|- | |- | ||
| | |Monitoring (loaded file only) | ||
| | |'''Profiles''' versus time and '''digital''' or '''analog view meter'''. | ||
|- | |- | ||
| | |Connection<sup>3 </sup>(loaded file only) | ||
| | |To any: '''recorder track''', '''waterfall reference (Z/X axis)''' and '''profiles''', '''level''' and '''delta level events'''. | ||
|} | |} | ||
| Line 730: | Line 730: | ||
The TDA plug-in analyzer provides time domain based analyses and visualizations. This plug-in analyzer computes statistical extractions and data compression of long duration oscilloscope views. All results are real time and operations are possible on-line or in post processing. The TDA plug-ins can operate free run or synchronized with the other plug-in analyzers. | The TDA plug-in analyzer provides time domain based analyses and visualizations. This plug-in analyzer computes statistical extractions and data compression of long duration oscilloscope views. All results are real time and operations are possible on-line or in post processing. The TDA plug-ins can operate free run or synchronized with the other plug-in analyzers. | ||
<font color="#4DA836">'''TDA Settings''' | <font color="#4DA836">'''TDA Settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Bandwidths''' | ||
| | |Oscillator 1 | ||
| | |'''800 mHz''' to '''40 kHz''' <br>(sampling oscillator 102.4 kS/s to 2,048 S/s) | ||
|- | |- | ||
| | |Oscillator 2 | ||
| | |'''512 mHz''' to '''25.6 kHz''' <br>(sampling oscillator 65.536 kS/s to 3,277 S/s) | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Time views''' | ||
| | |Depth | ||
| | |'''7200/ABW<ref>ABW: the plug-in Analysis Bandwidth.</ref> '''sec to''' 100 000 '''sec (27 hours) - '''Independent''' on each channel | ||
|- | |- | ||
| | |Time base (resolution) | ||
| | |'''Depth/2048'''- '''Independent''' on each channel | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Time span for extraction'''<br>'''(averaging)''' | ||
| | |Type | ||
| | |Continuous sliding with refresh each 256 sample'''s '''('''Exponential''') - One shot ('''Linear''') - Repeated shot ('''Repeated linear''') | ||
|- | |- | ||
| | |Duration | ||
| | |'''1/ABW '''to''' 2 10'''<sup>'''6'''</sup>'''/ABW''' (ex: 50 ms to 1000 sec @ 2 kHz) | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Channels''' | ||
| | |OR36 & OR38 analyzers | ||
|'''32 channels '''per plug-in for '''on line''' 32 to 256 in '''post-analysis''' | |'''32 channels '''per plug-in for '''on line''' 32 to 256 in '''post-analysis''' | ||
|- | |- | ||
| | |OR34 & OR35 analyzers | ||
| | |'''8 channels '''per plug-in''' '''for '''on line''' and '''post-analysis''' | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Filters''' | ||
| | |On each channel | ||
| | |'''Any NVGate''' filter can independently be applied to each dynamic input (See Filters §) | ||
|- | |- | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Triggering'''<br><br> | ||
| | |Start analysis | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run''' | ||
|- | |- | ||
| | |End analysis | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run''' | ||
|- | |- | ||
| | |Repeat analysis | ||
| | |On '''new start''' or '''end of averaging''' | ||
|- | |- | ||
| | |Trigger delay | ||
| | |Positive''' '''=''' unlimited''' - negative = '''32k Samples''' | ||
|} | |} | ||
<font color="#4DA836">'''TDA Results''' | <font color="#4DA836">'''TDA Results''' | ||
The following results are available for real time or post-analysis display, report and saving. | The following results are available for real time or post-analysis display, report and saving. | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center"| | |align = "center"|'''Time Views''' | ||
| | |Overview | ||
| | |'''Signal envelope: '''Min/Max line for each time step - | ||
|- | |- | ||
|align = "center"| | |align = "center"| | ||
| | |Statistical values | ||
| | |'''DC - RMS - Min- Max - Peak - Peak to Peak - Crest factor - Skewness - Kurtosis - '''computed on a user defined area of the time view | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Extractions''' | ||
| | |Statistical values | ||
| | |'''DC - RMS - Min- Max - Peak - Peak to Peak - Crest factor - Kurtosis - '''computed on the Time span – All values available for '''View-meter''' and/or '''Waterfall profiles''' | ||
|} | |} | ||
| Line 818: | Line 818: | ||
The FFT plug-in analyzer features multiple vibrations results depending on applied setting. This type of plug-in analyzers computes real-time (on-line or post-processing) Fast Fourier Transform algorithms with multiple averaging domain and trigger capabilities. Up to 4 FFT plug-ins can operate at the same time. | The FFT plug-in analyzer features multiple vibrations results depending on applied setting. This type of plug-in analyzers computes real-time (on-line or post-processing) Fast Fourier Transform algorithms with multiple averaging domain and trigger capabilities. Up to 4 FFT plug-ins can operate at the same time. | ||
<font color="#4DA836">'''FFT Settings''' | <font color="#4DA836">'''FFT Settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Bandwidths''' | ||
| | |Oscillator 1 | ||
| | |'''800 mHz''' to '''40 kHz''' <br>(sampling oscillator 102.4 kS/s to 2,048 S/s) | ||
|- | |- | ||
| | |Oscillator 2 | ||
| | |'''512 mHz''' to '''25.6 kHz''' <br>(sampling oscillator 65.536 kS/s to 3,277 S/s) | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Resolution''' | ||
| | |Lines | ||
| | |'''101''', '''201''', '''401''', '''801''', '''1601''', '''3201''', '''6401, 12801<ref>With force DSP</ref> and 25601 lines''' | ||
|- | |- | ||
| | |Frequency resolution | ||
| | |'''80 µHz '''(512 mHz/6401 lines) <br>to '''400 Hz '''(40 kHz/101 lines) | ||
|- | |- | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Averaging''' | ||
| | |Domain | ||
| | |'''Spectral''' (power) - '''time''' (with phase) - '''FDSA''' (Synchronized with one frequency) | ||
|- | |- | ||
| | |Type | ||
| | |'''Exponential''' - '''linear''' - '''repeated linear''' - '''referenced peak hold''' (eq. to tracking filter locked on reference channel frequency) - '''peak hold''' | ||
|- | |- | ||
| | |Size | ||
| | |'''Duration '''or '''number of blocks''', unlimited size | ||
|- | |- | ||
| | |Overlap | ||
| | |'''0%''' to '''99.9%''' depending on block size - '''retrigger''' | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Channels''' | ||
| | |OR36, MP & OR38 analyzers | ||
| | |'''32 to 256 ch. '''per plug-in for '''on line''' and '''post-analysis''' | ||
|- | |- | ||
| | |OR34 & OR35 analyzers | ||
| | |'''8 channels '''per plug-in''' '''for '''on line''' and '''post-analysis''' | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Weighting''' | ||
| | |General | ||
| | |'''Uniform - Hanning - Hamming - Kaiser Bessel''' | ||
|- | |- | ||
| | |Modal acquisition | ||
| | |User defined''' Force '''(rect.)''' '''and '''Response '''(Rect. <nowiki>+</nowiki> exp) | ||
|- | |- | ||
| | |Assignment | ||
| | |Independently on any channels | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Filters''' | ||
| | |On each channel | ||
| | |'''Any NVGate''' filter can independently be applied to each dynamic input (See Filters §) | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Cross functions''' | ||
| | |Reference selection | ||
| | |'''Full''' or '''partial matrix''' available (all channels can be references) | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Zoom''' | ||
| | |Magnification factor | ||
| | |'''2 to 128 '''by step power of 2 | ||
|- | |- | ||
| | |Min., max and center frequencies | ||
| | |Graphically selectable on wide band spectrum | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Triggering''' | ||
| | |Start averaging | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run''' | ||
|- | |- | ||
|align = "center"| | |align = "center"| | ||
| | |End averaging | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run''' | ||
|- | |- | ||
|align = "center"| | |align = "center"| | ||
| | |New block | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run''' | ||
|- | |- | ||
|align = "center"| | |align = "center"| | ||
| | |Repeat averaging | ||
| | |On '''new start''' or '''end of averaging''' | ||
|- | |- | ||
|align = "center"|<br> | |align = "center"|<br> | ||
| | |Trigger delay | ||
| | |Positive''' '''=''' unlimited''' - negative = '''32k Samples''' | ||
|- | |- | ||
|align = "center"| | |align = "center"| | ||
| | |Automatic | ||
| | |Reject '''overloaded blocks''' | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Blocks rejection'''<br>'''Overall''' | ||
| | |Manual | ||
| | |'''Accept''' or '''Reject '''after preview of averaged results (FRF, Coherence) | ||
|- | |- | ||
|align = "center"| | |align = "center"| | ||
| | |Normal | ||
| | |'''Accept''' all blocks | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Overall''' | ||
| | |Detector | ||
| | |'''Quadratic sum of spectra lines''' taking in '''account weighting window equivalent noise bandwidth''' | ||
|- | |- | ||
| | |Lower and upper frequencies | ||
| | |Selectable into the current FFT bandwidth | ||
|} | |} | ||
<font color="#4DA836">'''FFT Results''' | <font color="#4DA836">'''FFT Results''' | ||
The following results are available for real time or post-analysis display, report and saving. | The following results are available for real time or post-analysis display, report and saving. | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Time averaging''' | ||
| | |Time domain | ||
| | |'''Filtered signal - Triggered block - Averaged Triggered block - Weighted Block - Lissajoux of triggered blocks''' | ||
|- | |- | ||
| | |Spectra | ||
| | |'''Complex spectra''' | ||
|- | |- | ||
| | |Cross-functions | ||
| | |Instantaneous''' cross-spectra''' - averaged '''cross-spectra''' - '''FRF H1''' - '''FRF H2''' - '''Coherence''' | ||
|- | |- | ||
| | |Overall | ||
| | |'''Overall RMS value''' in specified band - '''Overall RMS profile''' in specified band. | ||
|- | |- | ||
|align = "center" rowspan = "6"| | |align = "center" rowspan = "6"|'''Spectral averaging''' | ||
| | |Time domain | ||
| | |'''Filtered signal - Triggered block - Weighted Block - Lissajous of triggered blocks''' | ||
|- | |- | ||
| | |Spectra | ||
| | |Instantaneous '''complex spectra''' - averaged '''power spectra''' | ||
|- | |- | ||
| | |Zoomed spectra | ||
| | |'''Zoomed''' instantaneous '''complex spectra''' - '''zoomed '''averaged '''power spectra''' | ||
|- | |- | ||
| | |Cross-functions | ||
| | |'''Instantaneous cross-spectra''' - averaged '''cross-spectra''' - '''FRF H1''' - '''FRF H2''' - '''Coherence''' | ||
|- | |- | ||
| | |Zoomed cross-function | ||
| | |Instantaneous '''zoomed cross-spectra''' - '''averaged zoomed cross-spectra''' - '''zoomed FRF H1''' - '''zoomed FRF H2''' - '''zoomed Coherence''' | ||
|- | |- | ||
| | |Overall | ||
| | |'''Overall RMS value''' in specified band - '''Overall RMS profile''' in specified band. | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Synchronous averaging on one frequency (FDSA)''' | ||
| | |Time domain | ||
| | |'''Filtered signal - Triggered block - Averaged Triggered block - Weighted Block - Lissajous of triggered blocks''' | ||
|- | |- | ||
| | |Spectra | ||
| | |Instantaneous '''complex spectra''' - time domain averaged '''power spectra''' | ||
|- | |- | ||
| | |Overall | ||
| | |'''Overall RMS value''' in specified band - '''Overall RMS profile''' in specified band. | ||
|} | |} | ||
| Line 1,011: | Line 1,011: | ||
Constant band order tracking is an optional add-on to the FFT plug-in analyzers. This add-on computes spectrum lines power related to RPM speed. This option adds settings and results to the FFT Plug-ins. Up to 4 constant Band tracking can operate on 4 different tachometers at the same time. | Constant band order tracking is an optional add-on to the FFT plug-in analyzers. This add-on computes spectrum lines power related to RPM speed. This option adds settings and results to the FFT Plug-ins. Up to 4 constant Band tracking can operate on 4 different tachometers at the same time. | ||
<font color="#4DA836">'''CBT Settings''' | <font color="#4DA836">'''CBT Settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Tracked Order''' | ||
| | |Number | ||
| | |'''8 per channels''' | ||
|- | |- | ||
| | |Max | ||
| | |'''0.001''' to '''800''' | ||
|- | |- | ||
| | |Constant bandwidth | ||
| | |'''User selectable per channel '''- minimum depend on weighting windows | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Computation''' | ||
| | |Associated tachometer | ||
| | |'''Any front end''', '''recorded''' or '''virtual tachometer''' | ||
|- | |- | ||
| | |Peak tracking | ||
| | |On/Off '''center bandwidth on nearest peak''' | ||
|- | |- | ||
| | |Order amplitude | ||
| | |Weighting windows eq. noise bandwidth correction | ||
|} | |} | ||
<font color="#4DA836">'''CBT Results''' | <font color="#4DA836">'''CBT Results''' | ||
The following results are available for real time or post-analysis display, report and saving. | The following results are available for real time or post-analysis display, report and saving. | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Scalar''' | ||
| | |Tracked order | ||
| | |'''Digital '''(magnitude and phase)''' '''or '''analog '''view-meter | ||
|- | |- | ||
| | |Cross phase tracking | ||
| | |'''Order phases '''are '''relative''' to the same order from a ref. channel | ||
|- | |- | ||
| | |Overall | ||
| | |'''Digital '''or '''analog view-meter''' | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Monitoring<ref>These results cannot be saved</ref>''' | ||
| | |Continuous profiles of tracked order | ||
| | |'''Profiles '''vs.''' time''' - '''profiles '''vs.''' RPM''' - max depth '''2048 pts''' - user selectable '''delta time''' - user selectable '''delta RPM''' | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Profiles''' | ||
| | |One shot acquisition | ||
| | |Tracked order (complex), cross phase orders and overall level can be collected by the ''waterfall ''profiles. | ||
|- | |- | ||
| | |References | ||
| | |Time, RPM and DC levels | ||
|} | |} | ||
| Line 1,079: | Line 1,079: | ||
This option adds settings and results to the FFT Plug-ins. | This option adds settings and results to the FFT Plug-ins. | ||
<font color="#4DA836">'''FFTDiag Settings''' | <font color="#4DA836">'''FFTDiag Settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Envelop demodulation''' | ||
| | |Activation | ||
| | |Enable/disable on all channels''' - '''requires '''zoom activation ''' | ||
|- | |- | ||
| | |Averaging | ||
| | |Spectral domain - FDSA | ||
|- | |- | ||
| | |Bandwidth | ||
| | |'''½ of zoom span - ¼ of FFT bandwidth''' | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Correlation''' | ||
| | |Activation | ||
| | |Enable/disable on all channels''' - '''All other FFT results are affected | ||
|- | |- | ||
| | |Weighting window | ||
| | |'''Uniform - Left '''zero padding''' - Centred '''zero padding | ||
|} | |} | ||
<font color="#4DA836">'''FFTDiag Results''' | <font color="#4DA836">'''FFTDiag Results''' | ||
The following results are available for real time or post-analysis display, report and saving. | The following results are available for real time or post-analysis display, report and saving. | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Scalar''' | ||
| | |Min/Max | ||
| | |Minimum and maximum amplitude per trigger block | ||
|- | |- | ||
| | |Peak detectors | ||
| | |'''Peak level - Peak to Peak level - Crest Factor - '''per trigger block | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Others''' | ||
| | |Cepstrum | ||
| | |'''Cepstrum - Zoomed cepstrum''' | ||
|- | |- | ||
| | |Correlation | ||
| | |'''Auto-correlation '''block''' - Cross correlation '''block | ||
|- | |- | ||
| | |Shaft view | ||
| | |Time domain signal on first rotation - angular representation | ||
|} | |} | ||
| Line 1,138: | Line 1,138: | ||
The SOA plug-in analyzer features several results depending on applied settings. Up to 2 SOA plug-ins can operate in parallel. | The SOA plug-in analyzer features several results depending on applied settings. Up to 2 SOA plug-ins can operate in parallel. | ||
<font color="#4DA836">'''SOA Settings''' | <font color="#4DA836">'''SOA Settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Bandwidths''' | ||
| | |Order span | ||
| | |'''6.25''' to '''400''' – up to '''800 '''with '''''ForceDSP''''' | ||
|- | |- | ||
| | |Frequency bandwidth | ||
| | |Up to '''40 kHz''' | ||
|- | |- | ||
| | |RPM span | ||
| | |Up to''' 192 000 RPM - Ratio of 64 '''between Min & Max RPM | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Resolution''' | ||
| | |Lines | ||
| | |'''101 - 201 - 401 – 801 – 1601 '''with '''''ForceDSP''''' | ||
|- | |- | ||
| | |Order resolution | ||
| | |'''1 - '''½ - ¼''' - 1/8 - 1/16 - 1/32''' | ||
|- | |- | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Averaging''' | ||
| | |Domain | ||
| | |'''Spectral''' (power) - '''revolution''' (re-sampled blocs) | ||
|- | |- | ||
| | |Type | ||
| | |'''Exponential''' - '''linear''' - '''repeated linear '''- '''peak hold''' | ||
|- | |- | ||
| | |Size | ||
| | |'''Number of blocks''', unlimited size | ||
|- | |- | ||
| | |Overlap | ||
| | |'''0 to 31 revolutions''' depending on resolution – '''0 to 359°''' into revolution – Retrigger on''' multi-pulse/rev''' | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Tachometer''' | ||
| | |Computation base | ||
| | |Any '''NVGate'''<sup>'''®</sup> ''''''tachometer '''(ext. sync, regular input, DC input, CAN, simulated, Fractional, and combined tach.) | ||
|- | |- | ||
| | |Phase reference | ||
| | |Tachometer pulse '''edge '''or pulse '''center '''requires to analyze the tachometer input | ||
|- | |- | ||
| | |0° Phase reference | ||
| | |Cosine or sine | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''RPM''' | ||
| | |Max speed variation | ||
| | |'''1''' to '''99%''' per analyzed block - blocks with higher variation are rejected. No control (set @ 100%) | ||
|- | |- | ||
| | |RPM range | ||
| | |User selectable '''max''' & '''min RPM''', under and over speed blocks are rejected | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Tracked order''' | ||
| | |Number | ||
| | |'''Up to 8 '''per channels | ||
|- | |- | ||
| | |Min-Max | ||
| | |'''1/32 '''to''' 400''' – up to '''800 '''with '''''ForceDSP''''' | ||
|- | |- | ||
| | |Cross phase tracking | ||
| | |'''Order phases '''are '''relative''' to the same order from a ref. channel | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Channels''' | ||
| | |OR36 & OR38 analyzers | ||
|'''32 channels '''per plug-in for '''on line''' - 32 to 256 in '''post-analysis''' | |'''32 channels '''per plug-in for '''on line''' - 32 to 256 in '''post-analysis''' | ||
|- | |- | ||
| | |OR34 & OR35 analyzers | ||
| | |'''8 channels '''per plug-in''' '''for '''on line''' and '''post-analysis''' | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Weighting''' | ||
| | |Windows selection | ||
| | |'''Uniform - Hanning - Hamming - Kaiser Bessel''' Applied independently on any channels | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Filters''' | ||
| | |On each channel | ||
| | |'''Any NVGate''' filter can independently be applied to each dynamic input (See Filters §) | ||
|- | |- | ||
|align = "center" rowspan = "6"| | |align = "center" rowspan = "6"|'''Triggering''' | ||
| | |Start averaging | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run''' | ||
|- | |- | ||
| | |End averaging | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run''' | ||
|- | |- | ||
| | |New block | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run ''' | ||
|- | |- | ||
| | |Repeat averaging | ||
| | |On '''new start''' or '''end of averaging''' | ||
|- | |- | ||
| | |Trigger delay | ||
| | |Positive''' '''=''' unlimited''' - negative = '''1/order res '''revolution | ||
|- | |- | ||
| | |Trigger block phase shift | ||
| | |'''±720°''' - independent for each channel | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Overall''' | ||
| | |Detector | ||
| | |'''Quadratic sum of order spectra lines''' taking in account '''weighting window equivalent noise bandwidth''' | ||
|- | |- | ||
| | |Lower and upper orders | ||
| | |Selectable into order span - from '''0,03125 '''to''' 800''' with '''''ForceDSP''''' | ||
|} | |} | ||
| Line 1,271: | Line 1,271: | ||
---- | ---- | ||
<font color="#4DA836">'''SOA Results''' | <font color="#4DA836">'''SOA Results''' | ||
The following results are available for real time or post-analysis display, report and saving. | The following results are available for real time or post-analysis display, report and saving. | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "5"| | |align = "center" rowspan = "5"|'''Revolution averaging''' | ||
| | |Time domain | ||
| | |'''Filtered '''signal''' ''' | ||
|- | |- | ||
| | |Angle domain (Revolution) | ||
| | |'''Triggered '''block '''- Averaged Triggered '''block''' - Weighted '''block | ||
|- | |- | ||
| | |Order spectra | ||
| | |'''Complex spectra''' | ||
|- | |- | ||
| | |Tracked orders | ||
| | |'''Digital '''(magnitude & phase) view-meter '''- Analog '''view -meter | ||
|- | |- | ||
| | |Overall | ||
| | |'''Overall RMS value''' in specified order band (digital or analog view-meter) | ||
|- | |- | ||
|align = "center" rowspan = "5"| | |align = "center" rowspan = "5"|'''Spectral (order) averaging''' | ||
| | |Time domain | ||
| | |'''Filtered '''signal | ||
|- | |- | ||
| | |Angle domain (Revolution) | ||
| | |'''Triggered block - Weighted Block ''' | ||
|- | |- | ||
| | |Order spectra | ||
| | |Instantaneous''' complex order spectra '''- averaged '''power order spectra''' | ||
|- | |- | ||
| | |Tracked orders | ||
| | |'''Digital (module and phase) '''and/or''' Analog '''view-meter. | ||
|- | |- | ||
| | |Overall | ||
| | |'''Overall RMS value''' in specified order band (digital or analog view-meter) | ||
|} | |} | ||
| Line 1,324: | Line 1,324: | ||
This option adds settings and results to the SOA Plug-ins. | This option adds settings and results to the SOA Plug-ins. | ||
<font color="#4DA836">'''SOADiag Settings''' | <font color="#4DA836">'''SOADiag Settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center"| | |align = "center"|'''Cross-functions''' | ||
| | |Reference selection | ||
| | |'''Full''' or '''partial matrix''' available (all channels can be references) - order domain averaging only. | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Angular Correlation''' | ||
| | |Activation | ||
| | |Enable/disable on all channels''' - '''All other SOA results are affected simultaneously | ||
|- | |- | ||
| | |Weighting window | ||
| | |'''Uniform - Left '''zero padding''' - Centred '''zero padding | ||
|} | |} | ||
<font color="#4DA836">'''SOADiag Results''' | <font color="#4DA836">'''SOADiag Results''' | ||
The following results are available for real time or post-analysis display, report and saving. | The following results are available for real time or post-analysis display, report and saving. | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Rev. synchronous Scalars''' | ||
| | |Min/Max | ||
| | |Minimum and maximum amplitude per trigger block (n rev.) | ||
|- | |- | ||
| | |RMS, DC | ||
| | |Per trigger block (n rev.) | ||
|- | |- | ||
| | |Peak detectors | ||
| | |'''Peak level - Peak to Peak level - Crest Factor - '''per trigger block (n rev.) | ||
|- | |- | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Others''' | ||
| | |Copstrum™ | ||
| | |'''Cepstrum''' of the order spectra | ||
|- | |- | ||
| | |Cross-functions | ||
| | |'''Instantaneous order cross-spectra''' - averaged order '''cross-spectra''' - '''ORF™ H1''' / '''H2''' -'''Coherence – angular '''or '''order '''domain averaging'''.''' | ||
|- | |- | ||
| | |Angular Correlation | ||
| | |'''Auto-correlation '''block''' - Cross correlation '''block - angular averaged | ||
|- | |- | ||
| | |Re-sampled Shaft view | ||
| | |Time domain signal on first rotation – '''angular representation''' - '''instantaneous''' or '''revolutions''' averaged | ||
|} | |} | ||
| Line 1,383: | Line 1,383: | ||
The OCT plug-in analyzer features multiple acoustic results depending on applied setting. This plug-in analyzer computes real-time signal (on-line or post-processing analysis) based on digital filters (CPB) and detectors. | The OCT plug-in analyzer features multiple acoustic results depending on applied setting. This plug-in analyzer computes real-time signal (on-line or post-processing analysis) based on digital filters (CPB) and detectors. | ||
<font color="#4DA836">'''OCT Settings''' | <font color="#4DA836">'''OCT Settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Bandwidths''' | ||
| | |Sampling oscillator #1 <br>(102.4 kS/s to 2,048 S/s) | ||
| | |Center of '''highest 1/3'''<sup>'''rd</sup> '''band = '''40 kHz'''<br>Center of '''lowest''' '''1/3'''<sup>'''rd</sup> '''band = '''100 mHz''' | ||
|- | |- | ||
| | |Sampling oscillator #2<br>(65.536 kS/s to 3,277 S/s) | ||
| | |Center of '''highest''' '''1/3'''<sup>'''rd</sup> '''band = '''25 kHz'''<br>Center of '''lowest''' '''1/3'''<sup>'''rd</sup> '''band = '''100 mHz''' | ||
|- | |- | ||
| | |Frequency span | ||
| | |Highest Band / lowest band''' <nowiki><</nowiki> 2000 '''(ex. 10Hz - 20kHz) | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Resolution''' | ||
| | |1/n Octave | ||
| | |'''1, 1/3<sup> ''''''rd'''</sup>''', 1/12'''<sup>'''th'''</sup>''', 1/24'''<sup>'''th '''</sup> | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Averaging''' | ||
| | |Basic | ||
| | | | ||
=====Linear & repeated linear (20 ms to 60,000 s) exponential (20 ms to 60s)===== | =====Linear & repeated linear (20 ms to 60,000 s) exponential (20 ms to 60s)===== | ||
|- | |- | ||
| | |Acoustics | ||
| | |'''Short LEQ 1 s, Short LEQ 1/8 s, Fast, Slow, Impulse ''' | ||
|- | |- | ||
| | |Constant Bandwidth * Time | ||
| | |B*T =''' 0.2dB, 0.5 dB, 1 dB, 2 dB''' | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Standards''' | ||
| | |Detectors | ||
| | |Complies with '''IEC 651, IEC 804, IEC 61-672 class 1''' | ||
|- | |- | ||
| | |CPB filters | ||
| | |Complies with '''IEC 1260 class 1''' | ||
|} | |} | ||
<font color="#4DA836">'''OCT Settings (continued)''' | <font color="#4DA836">'''OCT Settings (continued)''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Channels''' | ||
| | |OR36 & OR38 analyzers | ||
|'''32 channels '''per plug-in for '''on line -''' 32 to 256 in '''post-analysis''' | |'''32 channels '''per plug-in for '''on line -''' 32 to 256 in '''post-analysis''' | ||
|- | |- | ||
| | |OR34 & OR35 analyzers | ||
| | |'''8 channels '''for '''on line''' and '''post-analysis''' | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Triggering''' | ||
| | |Start averaging | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run''' | ||
|- | |- | ||
| | |End averaging | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run''' | ||
|- | |- | ||
| | |Repeat averaging | ||
| | |On '''new start''' or '''end of averaging''' | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Overall''' | ||
| | |Detectors | ||
| | |'''2 parallel overall detectors''' linear and weighted (time domain) | ||
|- | |- | ||
| | |Weighting | ||
| | |'''A''', '''C''', or '''Z''' (none) applicable in '''10 kHz - 40 kHz''' bandwidth | ||
|} | |} | ||
<font color="#4DA836">'''OCT Results''' | <font color="#4DA836">'''OCT Results''' | ||
The following results are available for real time or post-analysis display, report and saving. | The following results are available for real time or post-analysis display, report and saving. | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Spectra''' | ||
| | |1/n Octave spectra | ||
| | |'''Instantaneous '''spectra''', averaged '''spectra | ||
|- | |- | ||
| | |Holden spectra | ||
| | |'''Minimum '''&''' maximum '''spectra | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Overall''' | ||
| | |Linear | ||
| | |'''Digital '''&''' analog '''view meter of time domain overall detector, exact bandwidth is informed | ||
|- | |- | ||
| | |Weighted | ||
| | |'''Digital '''&''' analog '''view meter''' '''of''' A '''or''' C '''weighted''' '''overall levels computed in time domain, exact bandwidth is informed | ||
|} | |} | ||
| Line 1,492: | Line 1,492: | ||
The OVA plug-in analyzer features class sound pressure level measurement according to IEC 61-672 standard. This plug-in analyzer computes real-time signal (on-line or post-processing analysis) based on digital filters and detectors. | The OVA plug-in analyzer features class sound pressure level measurement according to IEC 61-672 standard. This plug-in analyzer computes real-time signal (on-line or post-processing analysis) based on digital filters and detectors. | ||
<font color="#4DA836">'''OVA Settings''' | <font color="#4DA836">'''OVA Settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Type''' | ||
| | |Standard | ||
| | |'''IEC 61-672-1 - IEC 651 - IEC 804''' | ||
|- | |- | ||
| | |Class | ||
| | |'''1''' | ||
|- | |- | ||
| | |Bandwidths | ||
| | |'''10 Hz '''to '''40 kHz''' - Adjustable | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Channels''' | ||
| | |OR36 & OR38 analyzers | ||
|'''32 channels '''per plug-in for '''on line''' - 32 to 256 in '''post-analysis''' | |'''32 channels '''per plug-in for '''on line''' - 32 to 256 in '''post-analysis''' | ||
|- | |- | ||
| | |OR34 & OR35 analyzers | ||
| | |'''8 channels '''for '''on line''' and '''post-analysis''' | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Averaging''' | ||
| | |Linear | ||
| | |'''User selectable '''duration '''- repeat '''mode | ||
|- | |- | ||
| | |Short leq | ||
| | |'''1/8 s - 1 s - '''User selectable duration | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Triggering''' | ||
| | |Start averaging | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run''' | ||
|- | |- | ||
| | |End averaging | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run''' | ||
|- | |- | ||
| | |Repeat averaging | ||
| | |On '''new start''' or '''end of averaging''' | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Detectors''' | ||
| | |Peak | ||
| | |1 '''peak detector/Ch'''. - '''A''', '''C''' or '''Z''' (none) weighting -'''Independent '''for each channel | ||
|- | |- | ||
| | |Weighting | ||
| | |'''3 overall detectors/Ch. - A''', '''C''' or '''Z''' (none) weighting - '''Fast''', '''Slow''', '''Impulse''' and '''linear''' time weighting - '''Independent''' for each channel | ||
|} | |} | ||
<font color="#4DA836">'''OVA Results''' | <font color="#4DA836">'''OVA Results''' | ||
The following results are available for real time or post-analysis display, report and saving. The following levels can be tracked in profiles up to 100 000 pts. each. | The following results are available for real time or post-analysis display, report and saving. The following levels can be tracked in profiles up to 100 000 pts. each. | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''SPL''' | ||
| | |Time weighted | ||
| | |Instant - max hold - min Hold | ||
|- | |- | ||
| | |Averaged | ||
| | |Short leq - leq | ||
|- | |- | ||
| | |Peak | ||
| | |Peak - Time weighted - max hold min hold | ||
|} | |} | ||
| Line 1,574: | Line 1,574: | ||
The IVC option converts frequency to voltage from the External synch inputs. It covers torsional and acyclism measurements. The converted signals are made available as standard inputs (or player tracks). This option operates real-time computation and operations are possible on-line or in post processing. | The IVC option converts frequency to voltage from the External synch inputs. It covers torsional and acyclism measurements. The converted signals are made available as standard inputs (or player tracks). This option operates real-time computation and operations are possible on-line or in post processing. | ||
<font color="#4DA836">'''IVC Settings & specs''' | <font color="#4DA836">'''IVC Settings & specs''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Rate''' | ||
| | |Pulse/rev | ||
| | |'''0.5 '''to''' 4096 - '''Up to''' 1 E6 '''with pre-divider | ||
|- | |- | ||
| | |Pulse/rev Frequency | ||
| | |'''<nowiki>></nowiki> 40 kpulse/sec''''' max'' | ||
|- | |- | ||
| | |Pre-divider | ||
| | |'''1 '''to''' 255 - '''hardware decimation (pulse are not measured) | ||
|- | |- | ||
| | |Pre-divider frequency | ||
| | |'''375 kpulse/sec'' '''''max. | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Missing pulses''' | ||
| | |Number | ||
| | |'''0 to 5''' consecutive pulses '''integer or fractional''' | ||
|- | |- | ||
| | |Hold off | ||
| | |'''2 '''consecutive pulses | ||
|- | |- | ||
| | |Generated signal | ||
| | |'''1'''<sup>'''st</sup> ''''''order interpolation''' | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Tach. phase ref''' | ||
| | |No missing pulse | ||
| | |First random - continuous offset further | ||
|- | |- | ||
| | |missing pulse <nowiki>></nowiki> 0 | ||
| | |Last known edge before missing pulse | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Resolution''' | ||
| | |Time | ||
| | |'''160 ns''' : 1/(SF x 64) | ||
|- | |- | ||
| | |Angular (with SOA) | ||
| | |350 µRad (20 mdegres) @ 8000 RPM, up to order 10 | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Pre-processing''' | ||
| | |Smoothing | ||
| | |Sliding average - '''1''' to '''32 '''samples | ||
|- | |- | ||
| | |Filtering | ||
| | |'''Any NVGate''' filter (See Filters §) incl. dt and 1/dt | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Max Speed''' | ||
| | |Without pre-divider | ||
| | |Max RPM = 2.4 e6/''Pulse per rev'' - 12 000 RPM @ 200 pulse/rev | ||
|- | |- | ||
| | |With pre-divider | ||
| | |Max RPM = 36 e6/''Pulse per rev'' - 12 000 RPM @ 200 pulse/rev | ||
|} | |} | ||
<font color="#4DA836">'''IVC Results''' | <font color="#4DA836">'''IVC Results''' | ||
The following results are available for real time or post-analysis. | The following results are available for real time or post-analysis. | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Signals''' | ||
| | |Number | ||
| | |'''1 '''to '''6 '''(depends on the number of available ext. synch) | ||
|- | |- | ||
| | |Use | ||
| | |Same as '''dynamic inputs''' or '''recorded''' dynamic inputs | ||
|- | |- | ||
| | |Magnitude | ||
| | |'''Torsional''' acceleration, velocity & angle – separated from angular magnitudes (RPM) | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''View''' | ||
| | |Type | ||
| | |Signal - filtered signal - '''256 samples''' frame | ||
|} | |} | ||
| Line 1,671: | Line 1,671: | ||
The angular sampling option allows localizing accurately the order phenomenon angle on cyclic rotating machineries. It uses the pulses delivered by and encoder (or zebra tape or gear teeth) to resample the inputs and torsional signal in the SOA plug-in. This option operates real-time computation and operations are possible on-line or in post processing. | The angular sampling option allows localizing accurately the order phenomenon angle on cyclic rotating machineries. It uses the pulses delivered by and encoder (or zebra tape or gear teeth) to resample the inputs and torsional signal in the SOA plug-in. This option operates real-time computation and operations are possible on-line or in post processing. | ||
<font color="#4DA836">'''IVC Settings & specs''' | <font color="#4DA836">'''IVC Settings & specs''' | ||
See front-end/ext. Synch § for details | See front-end/ext. Synch § for details | ||
| Line 1,680: | Line 1,680: | ||
This option operates real-time computation on raw or recorded signal. | This option operates real-time computation on raw or recorded signal. | ||
<font color="#4DA836">'''VIn Settings''' | <font color="#4DA836">'''VIn Settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Output''' | ||
| | |Number | ||
| | |'''12''' Operators | ||
|- | |- | ||
| | |Type | ||
| | |'''New item''' in the active '''inputs/tracks list''' | ||
|- | |- | ||
| | |Synchronization | ||
| | |'''0° phase shift''' with sources and analyzed signal | ||
|- | |- | ||
| | |Magnitude | ||
| | |'''Automatic''' or '''voltage''' if unresolved | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Sources''' | ||
| | |Number | ||
| | |'''1''' to '''32 channels''' | ||
|- | |- | ||
| | |Type | ||
| | |Analyzer '''dynamic inputs''' or '''recorded''' dynamic inputs | ||
|- | |- | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Output adjustment''' | ||
| | |Type | ||
| | |'''''(Input * Coeff <nowiki>+</nowiki> Offset ) <nowiki>^</nowiki>power''''' - independent on each output | ||
|- | |- | ||
| | |Offset | ||
| | |Any real value from '''-1 e9 to 1 e9''' - ex: -5.67 | ||
|- | |- | ||
| | |Coefficient | ||
| | |Any real value from '''-1 e9 to 1 e9''' - ex: 12 | ||
|- | |- | ||
| | |Power | ||
| | |Any real value from '''-4 to 4''' - ex: 0.5 | ||
|- | |- | ||
|align = "center" rowspan = "5"| | |align = "center" rowspan = "5"|'''Sources adjustment''' | ||
| | |Type | ||
| | |'''''Filtering <nowiki>[</nowiki> (input * Coeff <nowiki>+</nowiki> Offset ) <nowiki>^</nowiki> power<nowiki>]</nowiki>''''' - independent for each source | ||
|- | |- | ||
| | |Offset | ||
| | |Any real value from '''-1 e9 to 1 e9''' - ex: -5.67 e-5 | ||
|- | |- | ||
| | |Coefficient | ||
| | |Any real value from '''-1 e9 to 1 e9''' - ex: 1200 | ||
|- | |- | ||
| | |Power | ||
| | |Any real value from '''-4 to 4''' - ex: -2.4567 | ||
|- | |- | ||
| | |Filtering | ||
| | |Any NVGate filter | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Operators''' | ||
| | |Type | ||
| | |'''Product''' - '''Sum''' - independent on each operator | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Twist''' | ||
| | |Type | ||
| | |'''Phase comparison''' – output in '''plane angle''' | ||
|- | |- | ||
| | |Correction (zeroing) offset | ||
| | |'''-360° '''to''' <nowiki>+</nowiki>360°''' | ||
|- | |- | ||
| | |Output | ||
| | |'''Plane angle''' or '''torque''' with conversion factor | ||
|} | |} | ||
| Line 1,769: | Line 1,769: | ||
The virtual parameter (VDC) allows combining front-end parametric inputs (DC) with math operations to generate a calculated parameter (new DC). This option covers numerous applications such as averaged temperature or non linear response transducers. The virtual parameters are made available as standard DC input. This option operates real-time computation on raw or recorded signal. | The virtual parameter (VDC) allows combining front-end parametric inputs (DC) with math operations to generate a calculated parameter (new DC). This option covers numerous applications such as averaged temperature or non linear response transducers. The virtual parameters are made available as standard DC input. This option operates real-time computation on raw or recorded signal. | ||
<font color="#4DA836">'''VDC Settings''' | <font color="#4DA836">'''VDC Settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Output''' | ||
| | |Number | ||
| | |'''12''' Operators | ||
|- | |- | ||
| | |Type | ||
| | |'''New item''' in the DC inputs/track list | ||
|- | |- | ||
| | |Synchronization | ||
| | |'''0° phase shift''' with sources and analyzed signal | ||
|- | |- | ||
| | |Magnitude | ||
| | |'''User defined''' | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Sources''' | ||
| | |Number | ||
| | |'''1''' to '''32 channels''' | ||
|- | |- | ||
| | |Type | ||
| | |Analyzer '''DC inputs''' or '''recorded''' DC inputs | ||
|- | |- | ||
|align = "center" rowspan = "7"| | |align = "center" rowspan = "7"|'''Editor''' | ||
| | |Type | ||
| | |Text | ||
|- | |- | ||
| | |Variables | ||
| | |'''Real''' values | ||
|- | |- | ||
| | |Operators | ||
| | |'''<nowiki>+</nowiki>''', '''-''', '''x''', '''/''', '''<nowiki>^</nowiki>''', '''=''' (affectation) | ||
|- | |- | ||
| | |Predefined | ||
| | |'''Ch x''' (Channels signals), '''Pi''', '''e''' | ||
|- | |- | ||
| | |Trigonometric functions | ||
| | |'''Sine''', '''Cosine''', '''Tangent''' - with '''Arc''' and '''Hyperbolic''' combination | ||
|- | |- | ||
| | |Logarithmic functions | ||
| | |'''Log2''', '''Log10''', '''Ln''', '''Exp''' | ||
|- | |- | ||
| | |Miscellaneous | ||
| | |'''Sqrt''', '''Abs, Min, Max, Sum, Avg''' | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Output characterization''' | ||
| | |Limits | ||
| | |Min and max: '''<nowiki>+</nowiki>/- 1 E9 '''- In current unit | ||
|- | |- | ||
| | |Information | ||
| | |'''Label''' (text) | ||
|} | |} | ||
| Line 1,840: | Line 1,840: | ||
The CTE option combines 2 actual tachometers with math to generates a calculated angular velocity (new tachometer). It covers various unreachable rotating parts and more specially the CVT gear chain measurements. The combined tachometers are made available as standard tachometer. This option operates real-time computation and operations are possible on-line or post processing. | The CTE option combines 2 actual tachometers with math to generates a calculated angular velocity (new tachometer). It covers various unreachable rotating parts and more specially the CVT gear chain measurements. The combined tachometers are made available as standard tachometer. This option operates real-time computation and operations are possible on-line or post processing. | ||
<font color="#4DA836">'''CTE Settings''' | <font color="#4DA836">'''CTE Settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Sources''' | ||
| | |Number | ||
| | |'''2''' | ||
|- | |- | ||
| | |Type | ||
| | |'''Any NVGate tachometer – '''excepted another CTE | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Output''' | ||
| | |Type | ||
| | |New item in the active tachometers list | ||
|- | |- | ||
| | |Synchronization | ||
| | |'''0° phase shift''' with sources and analyzed signal | ||
|- | |- | ||
|align = "center" rowspan = "7"| | |align = "center" rowspan = "7"|'''Editor''' | ||
| | |Type | ||
| | |Text | ||
|- | |- | ||
| | |Variables | ||
| | |'''Real''' values | ||
|- | |- | ||
| | |Operators | ||
| | |'''<nowiki>+</nowiki>''', '''-''', '''x''', '''/''', '''<nowiki>^</nowiki>''', '''=''' (affectation) | ||
|- | |- | ||
| | |Predefined | ||
| | |Rmp1, Rpm2 (sources speed), '''Pi''', '''e''' | ||
|- | |- | ||
| | |Trigonometric functions | ||
| | |'''Sine''', '''Cosine''', '''Tangent''' - with '''Arc''' and '''Hyperbolic''' combination | ||
|- | |- | ||
| | |Logarithmic functions | ||
| | |'''Log2''', '''Log10''', '''Ln''', '''Exp''' | ||
|- | |- | ||
| | |Miscellaneous | ||
| | |'''Sqrt''', '''Abs, Min, Max, Sum, Avg, Sign, If, Rint''' | ||
|- | |- | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Output characterization''' | ||
| | |Rotation | ||
| | |Clock wise or counter clock wise | ||
|- | |- | ||
| | |Average | ||
| | |'''Sliding''' - '''1''' to '''256 '''revolution | ||
|- | |- | ||
| | |Speed limits | ||
| | |Min: '''0 RPM''' - max: '''1 200 000 RPM''' | ||
|- | |- | ||
| | |Information | ||
| | |Label (text) | ||
|} | |} | ||
<font color="#4DA836">'''CTE Results''' | <font color="#4DA836">'''CTE Results''' | ||
The following results are available for real time or post-analysis | The following results are available for real time or post-analysis | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Signals''' | ||
| | |Number | ||
| | |'''4''' | ||
|- | |- | ||
| | |Use | ||
| | |Same as on-line '''Tachometer '''or '''recorded''' tachometer | ||
|- | |- | ||
| | |Magnitude | ||
| | |Angular velocity (RPM) | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''View''' | ||
| | |Types | ||
| | |'''View meter''' - '''1''' to '''100 s''' rolling '''profile''' | ||
|} | |} | ||
| Line 1,938: | Line 1,938: | ||
The monitor is an independent (dedicated processor) module that processes continuously FFT analysis on 4 channels at the maximum available bandwidth. The aim of this module is to monitor in both domains (time and spectral) 4 inputs and to compute basic indicators for monitoring and triggering purpose. | The monitor is an independent (dedicated processor) module that processes continuously FFT analysis on 4 channels at the maximum available bandwidth. The aim of this module is to monitor in both domains (time and spectral) 4 inputs and to compute basic indicators for monitoring and triggering purpose. | ||
<font color="#4DA836">'''Monitor settings''' | <font color="#4DA836">'''Monitor settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "7"| | |align = "center" rowspan = "7"|'''Fixed setup''' | ||
| | |Bandwidth | ||
| | |'''ABW = Sampling freq / 2.56''' | ||
|- | |- | ||
| | |Resolution | ||
| | |'''401 lines''' | ||
|- | |- | ||
| | |Average domain | ||
| | |'''Spectral '''(power) | ||
|- | |- | ||
| | |Overlap | ||
| | |'''0%''' | ||
|- | |- | ||
| | |Average type | ||
| | |'''Exponential''' | ||
|- | |- | ||
| | |Weighting windows | ||
| | |'''Hanning''' | ||
|- | |- | ||
| | |Trigger | ||
| | |'''Free run''' | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Channels''' | ||
| | |Number | ||
| | |'''4 ''' | ||
|- | |- | ||
| | |Swap | ||
| | |Between '''any active dynamic input - hot swap '''capable | ||
|- | |- | ||
|align = "center"| | |align = "center"|'''Average''' | ||
| | |Duration | ||
| | |'''Instantaneous '''(20 ms) to''' unlimited''' | ||
|- | |- | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Overall analysis''' | ||
| | |Pass band filter | ||
| | |'''Butterworth''' order '''2''' to '''10 -''' '''IIR''' type - '''Bypass''' function | ||
|- | |- | ||
| | |Upper & lower frequency | ||
| | |'''User defined - '''can be graphically modified | ||
|- | |- | ||
| | |Computed indicators | ||
| | |'''DC - Max - Min - RMS - Skew - Kurtosis - '''Into defined pass band - '''overall''' if bypass is on | ||
|- | |- | ||
| | |Average | ||
| | |'''User defined '''duration''' - independent '''from spectral averaging | ||
|} | |} | ||
<font color="#4DA836">'''Monitor results and connections''' | <font color="#4DA836">'''Monitor results and connections''' | ||
The following results are available for real time or post-analysis display, connection to other modules. | The following results are available for real time or post-analysis display, connection to other modules. | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center"| | |align = "center"|'''Time domain''' | ||
| | |Play back | ||
| | |On any output generator - hot swappable | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''FFT analyzer''' | ||
| | |Trigger bloc | ||
| | |'''1024 samples''' - time domain '''analyzed bloc''' | ||
|- | |- | ||
| | |Spectra | ||
| | |Instantaneous '''complex spectra''' - averaged '''power spectra''' | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Overall detectors''' | ||
| | |Display (digital or analog view-meter) | ||
| | | | ||
=====DC - Max - Min - RMS - Skew - Kurtosis===== | =====DC - Max - Min - RMS - Skew - Kurtosis===== | ||
|- | |- | ||
| | |Connection | ||
| | |To '''level''' and '''delta level''' event detector - to '''waterfall profiles''' | ||
|} | |} | ||
| Line 2,035: | Line 2,035: | ||
The waterfall module operates as a stack for plug-in analyzers results. Waterfall module features advanced graphics for 3D and profiles, including extraction tools. It can synchronize results coming from multiple plug-in analyzers and sources in one result. | The waterfall module operates as a stack for plug-in analyzers results. Waterfall module features advanced graphics for 3D and profiles, including extraction tools. It can synchronize results coming from multiple plug-in analyzers and sources in one result. | ||
<font color="#4DA836">'''Waterfall settings''' | <font color="#4DA836">'''Waterfall settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Mode''' | ||
| | |Continuous | ||
| | |'''Circular buffer''' of results | ||
|- | |- | ||
| | |One shot | ||
| | |Fill stack and stop waterfall acquisition | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Triggering''' | ||
| | |Start acquisition | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run''' | ||
|- | |- | ||
| | |Stop acquisition | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' plus '''manual '''and '''free run''' | ||
|- | |- | ||
| | |New slice (point or spectra) | ||
| | |Any '''NVGate'''<sup>'''® '''</sup>'''event''' - '''manual - free run - '''availability of '''connected results''' - '''periodic''' | ||
|} | |} | ||
<font color="#4DA836">'''Waterfall settings (continued)''' | <font color="#4DA836">'''Waterfall settings (continued)''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Size''' | ||
| | |Number of result per acquisition | ||
| | |Up to '''95 results <nowiki>+</nowiki> Time''' | ||
|- | |- | ||
| | |Depth | ||
| | |'''2''' to '''100,000''' slices or points - depend on PC available memory and requested result - '''automatically adjusted '''before acquisition | ||
|- | |- | ||
| | |Depth for stand-alone acquisition | ||
| | |''' '''Up to''' 3 MSamples '''per computation DSP''' ''' | ||
|- | |- | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Channels''' | ||
| | |'''Type scalar''' (the following results are connectable to waterfall channels) | ||
| | |'''Overall levels''' (lin and weighted) from OvA and 1/n OCT - '''Monitor indicators''' (DC, Max, Min, RMS, Kurtosis) - '''Orders''' (from CBT and SOA) - '''Complex orders''' (magnitude & phase) - '''Overall levels '''in selected BW from FFT & SOA (order or frequency) - '''TDA''' scalar: '''DC, Min/max, RMS, Kurtosis, peak, peak-peak, crest factor''' | ||
|- | |- | ||
| | |'''Type 2D - FFT''' (the following results are connectable to waterfall channels) | ||
| | |'''Triggered '''block''' - Averaged Triggered '''block''' - Weighted '''Block''' - Complex '''spectra''' - Power '''spectra''' -Cross-spectra''' - '''FRF H1''' - '''FRF H2''' - '''Coherence - Zoomed''' complex spectra - '''zoomed power '''spectra | ||
|- | |- | ||
| | |'''Type 2D - OCT''' (the following results are connectable to waterfall channels) | ||
| | |'''Instantaneous''' spectra - '''averaged '''spectra - '''max & min''' '''hold '''spectra | ||
|- | |- | ||
| | |'''Type 2D - SOA''' (the following results are connectable to waterfall channels) | ||
| | |'''Triggered '''block''' - Averaged Triggered '''block''' - Weighted '''block''' - Complex order '''spectra''' - Power order '''spectra | ||
|} | |} | ||
<font color="#4DA836">'''Waterfall results''' | <font color="#4DA836">'''Waterfall results''' | ||
The following results are available for real time or post-analysis display, report and saving. All stacked result can be saved. | The following results are available for real time or post-analysis display, report and saving. All stacked result can be saved. | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''3D''' | ||
| | |Display | ||
| | |'''1 pane''' (3D) - '''2 panes''' (3D <nowiki>+</nowiki> YZ view or 3D <nowiki>+</nowiki> XY view) , '''3 panes''' (3D <nowiki>+</nowiki> YZ <nowiki>+</nowiki> XY <nowiki>+</nowiki> Extraction view) windows - automatic or user selectable '''pane arrangement - Real or imaginary '''part and '''module or phase''' for complex results | ||
|- | |- | ||
| | |Z axis (X axis for extraction and YZ view) | ||
| | |'''Any reference''' - '''time''' - independent for any window - swap reference at any time | ||
|- | |- | ||
| | |Saving selection | ||
| | |'''Entire 3D data '''and / or any active''' section '''(YZ, XY or Extraction) | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Profiles''' | ||
| | |Display | ||
| | |Profile of any scalar - '''Real or imaginary '''part and '''module or phase''' for complex results | ||
|- | |- | ||
| | |X axis | ||
| | |'''Any reference''' - '''Time''' – '''Slice''' - independent for any window - swap reference at any time | ||
|} | |} | ||
<font color="#4DA836">'''Waterfall Tools''' | <font color="#4DA836">'''Waterfall Tools''' | ||
The following results are available for real time or post-analysis display, report and saving. | The following results are available for real time or post-analysis display, report and saving. | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|rowspan = "4"| | |rowspan = "4"|Sections | ||
| | |YZ Sections (Profiles vs. Ref) | ||
| | |Any order/frequency - '''Power''' - '''Peak''' - on selected bandwidth | ||
|- | |- | ||
| | |XY Sections (Spectra) | ||
| | |Any position in the current ref. - '''Min''' - '''Max''' - '''Average''' - on selected range or all slices | ||
|- | |- | ||
| | |Order/Frequency extraction (profiles vs. Ref.) | ||
| | |Any order/frequency extraction - '''user selectable tach'''. - '''Power''' - '''Peak''' - on selectable bandwidth - '''Max order ''' | ||
|- | |- | ||
| | |Number of sections | ||
| | |'''Unlimited''' - available on result or real-time waterfalls | ||
|- | |- | ||
|rowspan = "3"| | |rowspan = "3"|Linked cursors | ||
| | |General | ||
| | | | ||
=====Single or dual cursor in each view - linked with other graphs===== | =====Single or dual cursor in each view - linked with other graphs===== | ||
|- | |- | ||
| | |Linked by value | ||
| | | | ||
=====Linked cursors track the same X value in different windows.===== | =====Linked cursors track the same X value in different windows.===== | ||
|- | |- | ||
| | |Linked by reference | ||
| | | | ||
=====Linked cursors track the same acquisition slice in different waterfall windows with different X or Z-axis.===== | =====Linked cursors track the same acquisition slice in different waterfall windows with different X or Z-axis.===== | ||
| Line 2,170: | Line 2,170: | ||
Each plug in analyzer (and recorder) can be started, stopped or triggered (new block) with events defined in the Event module. | Each plug in analyzer (and recorder) can be started, stopped or triggered (new block) with events defined in the Event module. | ||
<font color="#4DA836">'''Event settings''' | <font color="#4DA836">'''Event settings''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "8"| | |align = "center" rowspan = "8"|'''Edge detector''' | ||
| | |Source | ||
| | |'''Any dynamic input''' - Any '''recorded '''dynamic input | ||
|- | |- | ||
| | |Label | ||
| | |String for '''event identification''' (Ex. "Impact" for a hammer impact detection) | ||
|- | |- | ||
| | |Threshold | ||
| | |Between '''min and max range''' - use '''source unit''' (ex. g for an accelerometer) | ||
|- | |- | ||
| | |Pre-filtering | ||
| | |'''A '''law - '''C''' law - any '''NVGate filter''' | ||
|- | |- | ||
| | |Slope | ||
| | |'''Rise '''-''' fall ''' | ||
|- | |- | ||
| | |Hold off | ||
| | |'''0 '''to '''36000''' s | ||
|- | |- | ||
| | |Hystersis | ||
| | |Into source''' input range''' - use '''source unit''' (ex. g for an accelerometer) | ||
|- | |- | ||
| | |Number | ||
| | |'''2 '''edge detectors | ||
|- | |- | ||
|align = "center" rowspan = "7"| | |align = "center" rowspan = "7"|'''RPM speed detector''' | ||
| | |Source | ||
| | |'''Any tachometer - '''computed from '''dynamic input''' or '''ext.sync '''-''' '''any r'''ecorded pulses '''(through tachometer) | ||
|- | |- | ||
| | |Label | ||
| | |String for '''event identification''' (Ex. "start speed" for a run up initial triggering) | ||
|- | |- | ||
| | |Threshold | ||
| | |Detection into''' '''source''' '''tachometer''' '''RPM range | ||
|- | |- | ||
| | |Slope | ||
| | |'''Run up '''-''' Run down ''' | ||
|- | |- | ||
| | |Hysteresis | ||
| | |'''0''' to '''source '''max RPM | ||
|- | |- | ||
| | |Interpolation | ||
| | |'''On''' interpolate event occurrence '''into revolution''' - '''Off''' event '''occur at revolution ends''' (new pulse) | ||
|- | |- | ||
| | |Number | ||
| | |'''2 to 6 '''RPM speed detector | ||
|- | |- | ||
|align = "center" rowspan = "8"| | |align = "center" rowspan = "8"|'''Delta RPM speed detector''' | ||
| | |Source | ||
| | |'''Any tachometer - '''computed from '''dynamic input''' or '''ext.sync '''-''' '''any r'''ecorded pulses '''(through tachometer) | ||
|- | |- | ||
| | |Label | ||
| | |String for '''event identification''' (Ex. "Each 100 RPM" for a run up triggering) | ||
|- | |- | ||
| | |Lower velocity | ||
| | |'''Minimum''' RPM speed - Events occurs only for higher source speed''' ''' | ||
|- | |- | ||
| | |Higher velocity | ||
| | |'''Maximum''' RPM speed - Events occurs only for lower source speed | ||
|- | |- | ||
| | |Delta velocity | ||
| | |Define '''velocity step''' - '''event occur each time''' source speed increase or decrease by delta velocity | ||
|- | |- | ||
| | |Slope | ||
| | |'''Run up''' - '''run down''' - '''first,''' first slope is automatically selected - '''any,''' event occur on any slope | ||
|- | |- | ||
| | |Interpolation | ||
| | |'''On,''' interpolate event occurrence '''into revolution''' - '''Off,''' event '''occur at revolution end''' (new pulse) | ||
|- | |- | ||
| | |Number | ||
| | |'''2 to 6 delta RPM''' speed detector | ||
|- | |- | ||
|align = "center" rowspan = "5"| | |align = "center" rowspan = "5"|'''Level detector''' | ||
| | |Source | ||
| | |Any '''parametric (DC)''' input - '''Monitor scalar''' - '''Filtered''' monitor scalar (Band Pass) | ||
|- | |- | ||
| | |Label | ||
| | |String for '''event identification''' (Ex. "temp A" for a recording trigger) | ||
|- | |- | ||
| | |Type | ||
| | |Monitor scalar - DC - RMS - Max - Min - Kurtosis | ||
|- | |- | ||
| | |Status | ||
| | |'''Above''' /''' below''' - Detection level - available in '''lin''' or '''dB ''' | ||
|- | |- | ||
| | |Number | ||
| | |'''1''' to '''4 '''level detectors | ||
|} | |} | ||
<font color="#4DA836">'''Event settings (continued)''' | <font color="#4DA836">'''Event settings (continued)''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Periodic event''' | ||
| | |Label | ||
| | |String for '''event identification''' (Ex. "Hourly" for 1 hour time interval) | ||
|- | |- | ||
| | |Time interval | ||
| | |'''2 ms''' to '''11 days''' - '''Synchronized''' with analyzer. | ||
|- | |- | ||
| | |Number | ||
| | |'''2 '''periodic events | ||
|- | |- | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Combination''' | ||
| | |Sources | ||
| | |'''Any event - 2 '''different sources''' '''defined as''' A '''and''' B''' | ||
|- | |- | ||
| | |Label | ||
| | |String for '''event identification''' (Ex. "Time/RPM variation" for a mix between periodic and delta RPM) | ||
|- | |- | ||
| | |Combination | ||
| | |A '''OR''' B - A '''AFTER''' B - A '''AND''' B (occur in the same bloc) | ||
|- | |- | ||
| | |Number | ||
| | |'''2 '''event combination''' ''' | ||
|- | |- | ||
|align = "center" rowspan = "5"| | |align = "center" rowspan = "5"|'''Plug-in synchronization''' | ||
| | |FFTx result available | ||
| | |Occurs at each '''new spectra availability''' - Occurs at '''end of linear averaging''' (repeat and linear) - One event per active FFT plug in (FFT1 to FFT4) | ||
|- | |- | ||
| | |OCT result available | ||
| | |Occurs at each new 1/n spectra availability - Occur at '''end of linear averaging''' (leq, short leq, linear repeat) | ||
|- | |- | ||
| | |SOAx result available | ||
| | |Occurs at each '''new spectra availability''' - Occurs at '''end of linear averaging''' (repeat and linear) - One event per active SOA plug in (up to 2) | ||
|- | |- | ||
| | |TDA result available | ||
| | |Occurs at each new level set ( RMS, DC, etc) availability - Occur at '''end of linear averaging''' (repeat and linear) | ||
|- | |- | ||
| | |OVA result available | ||
| | |Occurs at each new set of overall level (short LEQ) availability - Occur at '''end of short averaging''' (repeat and linear) | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Generators Synchronization''' | ||
| | |Event synchronized with '''blocks of''': | ||
| | |'''Multi-sine''' - '''random noise''' - '''chirps''' | ||
|- | |- | ||
| | |'''Swept sine''' generator event: | ||
| | |'''Swept sine stabilized''' (output amplitude established) - '''step sine stabilized''' (occur x sec after step frequency is reached) - '''pure tone stabilized''' (output amplitude established) | ||
|} | |} | ||
| Line 2,357: | Line 2,357: | ||
NVGate<sup>®</sup> proposes a set of generator signals. | NVGate<sup>®</sup> proposes a set of generator signals. | ||
<font color="#4DA836">'''Output signals''' | <font color="#4DA836">'''Output signals''' | ||
The following output signals are available as standard and can be independently applied to the front-end outputs. | The following output signals are available as standard and can be independently applied to the front-end outputs. | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "10"| | |align = "center" rowspan = "10"|'''Sine''' | ||
| | |Type | ||
| | |Pure tone - Swept sine - Step sine | ||
|- | |- | ||
| | |Frequency | ||
| | |'''100 µHz''' to '''40 kHz''' - smooth variation between step - resolution '''10 µHz''' | ||
|- | |- | ||
| | |Frequency control | ||
| | |Start & stop frequencies - pause/release during sweep - adjustment during pause - step | ||
|- | |- | ||
| | |Cycle control | ||
| | |One shot - One cycle - continuous sweep between boundaries | ||
|- | |- | ||
| | |Amplitude control | ||
| | |'''Settling time''' 100 µs to 10 s - '''Stabilization time''' 0 s to 1000 s | ||
|- | |- | ||
| | |Sweep speed | ||
| | |Linear: '''300 mHz/s''' to '''20 kH/s''' - Log: '''5 mOct/s''' to '''330 Oct/s''' | ||
|- | |- | ||
| | |Step control | ||
| | |'''Synchronized with analysis end''' - free run | ||
|- | |- | ||
| | |Gain control | ||
| | |'''-15 dB''' to '''<nowiki>+</nowiki>60 dB''' - '''Independent''' for each output <br>- Amplitude '''variation controlled''' by settling time (1 ms to 1000 s) | ||
|- | |- | ||
| | |Phase control | ||
| | |Offset ±360° - '''Independent''' for each output - phase '''variation controlled''' by phase speed (1.5°/s to 360°/s) | ||
|- | |- | ||
| | |Number | ||
| | |'''2 to 6''' sine generated simultaneously - with '''independent phases and amplitudes''' - '''synchronized''' frequencies | ||
|- | |- | ||
|align = "center" rowspan = "6"| | |align = "center" rowspan = "6"|'''Multi-sine''' | ||
| | |Frequency span | ||
| | |From '''125 mHz''' to '''40 kHz''' | ||
|- | |- | ||
| | |Amplitude | ||
| | |'''0 '''to''' 2.5 Vrms''' - Settling time''' 100 µs '''to''' 10 s''' | ||
|- | |- | ||
| | |Resolution | ||
| | |'''125 mHz''' to '''400 Hz''' - '''101''' lines to '''6401''' lines | ||
|- | |- | ||
| | |Phase | ||
| | |'''Fixed''' (all sine have same phase) - '''Random''' | ||
|- | |- | ||
| | |Burst | ||
| | |'''0 '''to '''100% '''- Step''' 1%''' | ||
|- | |- | ||
| | |Number | ||
| | |'''2''' to '''4''' '''independents''' multi-sine | ||
|} | |} | ||
<font color="#4DA836">'''Output signals (continued)''' | <font color="#4DA836">'''Output signals (continued)''' | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "5"| | |align = "center" rowspan = "5"|'''Random noise''' | ||
| | |Frequency span | ||
| | |From '''125 mHz''' to '''40 kHz''' - independent lower and upper frequencies | ||
|- | |- | ||
| | |Amplitude | ||
| | |'''0 '''to''' 2.5 Vrms''' - Settling time''' 100 µs '''to''' 10 s ''' | ||
|- | |- | ||
| | |Type | ||
| | |'''White '''-''' pink ''' | ||
|- | |- | ||
| | |Burst | ||
| | |'''0 '''to '''100% '''- Step''' 1% - '''Bloc duration''': 2.5 ms to 100 s''' | ||
|- | |- | ||
| | |Number | ||
| | |'''2''' to '''6 independent''' and '''uncorrelated''' random noises | ||
|- | |- | ||
|align = "center" rowspan = "5"| | |align = "center" rowspan = "5"|'''Chirp''' | ||
| | |Frequency span | ||
| | |From '''3.125 Hz''' to '''40 kHz''' - independent lower and upper frequencies | ||
|- | |- | ||
| | |Amplitude | ||
| | |'''0 '''to''' 7,07 Vrms''' - Settling time''' 100 µs '''to''' 10 s''' | ||
|- | |- | ||
| | |Size | ||
| | |'''256 '''- '''512 '''-''' 1024 '''-''' 2048 '''-''' 4096 '''-''' 8192 '''-''' 16384 ''' | ||
|- | |- | ||
| | |Burst | ||
| | |'''0 '''to '''100% '''- Step''' 1%''' | ||
|- | |- | ||
| | |Number | ||
| | |'''2''' to '''6''' '''independents''' chirps | ||
|} | |} | ||
| Line 2,481: | Line 2,481: | ||
{|border="2" cellspacing="0" cellpadding="4" width="100%" | {|border="2" cellspacing="0" cellpadding="4" width="100%" | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''High pass''' | ||
| | |Type | ||
| | |'''Butterworth''' – '''IIR '''type | ||
|- | |- | ||
| | |Order | ||
| | |'''1''' to '''6''' | ||
|- | |- | ||
| | |Cutoff frequency | ||
| | |'''ABW<ref>ABW : the analysis bandwidth, of the plug-in or front end where the filter is in use.</ref> '''to '''ABW/1024''' | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Low pass''' | ||
| | |Type | ||
| | |'''Butterworth''' – '''IIR '''type | ||
|- | |- | ||
| | |Order | ||
| | |'''1''' to '''6''' | ||
|- | |- | ||
| | |Cutoff frequency | ||
| | |'''ABW '''to '''ABW /102.4''' | ||
|- | |- | ||
|align = "center" rowspan = "4"| | |align = "center" rowspan = "4"|'''Stop/pass band''' | ||
| | |Type | ||
| | |'''Butterworth''' – '''IIR '''type | ||
|- | |- | ||
| | |Order | ||
| | |'''2''' to '''10''' | ||
|- | |- | ||
| | |Cutoff frequencies | ||
| | |'''ABW '''to''' 0.055 * ABW ''' | ||
|- | |- | ||
| | |Bandwidth | ||
| | |'''ABW/2 '''to''' 0.0075 * ABW ''' | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''Integrators''' | ||
| | |Type | ||
| | |'''HP, Single '''or''' double ''' | ||
|- | |- | ||
| | |High pass frequency | ||
| | |'''ABW''' '''/10 000 '''or ''' ABW''' /'''2 000 ''' | ||
|- | |- | ||
| | |Integration time | ||
| | |'''2 ms '''to''' 500 s''' | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Differentiators''' | ||
| | |Type | ||
| | |'''Single''' | ||
|- | |- | ||
| | |Average | ||
| | |'''Sliding '''-''' 0 '''to''' 2 s''' | ||
|- | |- | ||
|align = "center" rowspan = "2"| | |align = "center" rowspan = "2"|'''Weightings''' | ||
| | |Laws | ||
| | |'''A''' & '''C''' laws | ||
|- | |- | ||
| | |Bandwidths | ||
| | |'''10''' kHz to '''40''' kHz | ||
|- | |- | ||
|align = "center" rowspan = "3"| | |align = "center" rowspan = "3"|'''All''' | ||
| | |By-Pass | ||
| | |'''Apply/bypass''' without stabilisation time - independently on each filter | ||
|- | |- | ||
| | |Application | ||
| | |Same filters set for each plug-in | ||
|- | |- | ||
| | |Label | ||
| | |Each filter features a user define name | ||
|} | |} | ||