NVGate Shortcuts
Shortcuts & glossary
General shortcuts
| F1 | On-Line Help |
| Ctrl + Space | Move from one layout to the next one |
| Ctrl + Tab | Move from one window to another one in the same layout |
| Page Up | Change Workspace tab (ASB, Control Panel, Project Manager) |
| Page Down | Change Workspace tab (ASB, Control Panel, Project Manager) |
| F10 | Freeze the active window |
| Move the cursor to the left | |
| Move the cursor to the right | |
| + | Zoom in on Y axis |
| - | Zoom out on Y axis |
| / | Zoom out on X axis |
| * |
Zoom in on X axis |
| Shift + F1 | Contextual help |
| Ctrl + Insert | Edit Copy |
| Shift + Delete | Edit Cut |
| Ctrl + X | Edit Cut |
| Shift + Insert | Edit Paste |
| Alt + Back | Edit Undo |
| Ctrl + R | Run |
| Pause | Pause |
| Ctrl + S | Stop |
| Ctrl + A | Zoom auto-scale on Y axis |
| Crtl + Alt + A | Auto-scale on all windows |
| Ctrl + Shift + A | Auto-range |
| Ctrl + B | Next Step |
| Ctrl + C | Copy item content (ASB settings, result template) |
| Ctrl + V | Paste item content (ASB settings, result template) |
| Ctrl + D | Save current workbook |
| Ctrl + Y | Accept acquisition |
| Ctrl + N | Reject acquisition |
| Ctrl + 0 to 9 | Macro start |
| Ctrl + P | Print report |
| Ctrl + Q | Zoom auto-scale on Z axis |
| Ctrl + T | Manual trigger |
| Ctrl + M | Add record marker |
| Ctrl + W or Z | Full width on active trace |
| Insert | Memorize active trace |
| Ctrl + Delete | Remove active trace |
| X/Y/Z +Shift + Mouse wheel (up) | Zoom in on (X/Y/Z) axis (+ Ctrl for small steps) |
| X/Y/Z +Shift + Mouse wheel (down) | Zoom out on (X/Y/Z) axis (+ Ctrl for small steps) |
| X/Y/Z + Mouse wheel (up) | Translate X/Y/Z axis positively (+ Ctrl for small steps) |
| X/Y/Z + Mouse wheel (down) | Translate X/Y/Z axis negatively (+ Ctrl for small steps) |
| Ctrl + F5 | Default mode activation (scale mode) |
| Ctrl + F6 | Zoom mode activation |
| Ctrl + F7 | Cursor mode activation |
| Ctrl + F8 | Move mode activation |
| Ctrl + F9 | Rotate mode activation |
| Ctrl + F10 | Marker mode activation |
| F2 to F9, F11, F12 | Macros hot keys |
Mouse wheel shortcuts
D windows
Mouse wheel: move the min, the max or shift a scale.
Note: If you do not have a mouse wheel, you can use the top and bottom arrows.
D windows
Cursor mode
Mouse Wheel: right/left move by 5 steps.
Mouse Wheel + CTRL: right/left move by 1 step.
Arrow mode
When the pointer is on the X or Y axis and on the min or max value, use the mouse wheel to move 5 pixels.
When the pointer is on the X or Y axis and on the min or max value, use the mouse wheel + CRTL to move 1 pixel.
When the pointer is in the middle of X or Y axis, use the mouse wheel to shift translation of the zoom area 5 pixels.
When the pointer is in the middle of the X or Y axis, use the mouse wheel + CRTL to shift of the zoom area 1 pixel.
When the pointer is in the middle of X or Y axis, use the mouse wheel + SHIFT to zoom quickly.
When the pointer is in the middle of X or Y axis, use the mouse wheel + CRTL + SHIFT to zoom.
Note: If you do not have a mouse wheel, you can use the home and end keys of the PC keyboard.
Glossary
Analog input
An analog input is the physical way into the OR38 multi-analyzer for a signal. An input can be activated or not and can be connected or not to a plug-in analyzer channel. The same input can be connected to one or several channels of an analyzer or even to several plug-in analyzers. The corresponding LED is on when the input is activated.
ASB (Analyzer Setting Browser)
ASB, The Analyzer Setting Browser, is one of the 3 graphic tools forming the workspace. It allows you to set up the analyzer and control the Instrument directly. The main categories of the ASB are inputs, resources, and plug-in analyzers. 3 types of icon represent these 3 categories. The setups made in the ASB are saved in the current project.
Channel
A channel is the way in to a plug-in analyzer. It can be activated or not and can be connected to an analog input or not. In order to be able to display a result obtained from an analyzer channel, the channel should be activated and connected to input.
Collection
A collection is a group of sub-modules of the same type (inputs, filters pass/stop band, etc.)
Control Panel
The control panel is part of the workspace. It allows you to control the measurement process. It is user-customizable and saved in the current project. The control panel is customized by right clicking in its area.
Cursor
The cursor allows you to obtain the coordinates of any point of a trace.
Download
Only available if the Instrument OR38 is connected to the PC. You can download the data stored in the OR38 to the PC hard drive.
Event definition
An event is defined as a trigger condition. Any event defined in the event definition is a resource of NVGate® and can be selected from any of the plug-in analyzers.
Export
Allows you converting a signal file into a specific format to a located directory.
Filter builder
The filter builder allows you to design the filters you need for your analysis. Any filter built in the filter builder is a resource of NVGate® and can be selected from any of the plug-in analyzers.
Front-end
Front-end is the section where you can set-up your analog inputs, outputs and external synchronizing inputs.
Graph
A graph is the trace display area. A graph can consist of one or several traces (multitrace 2D or 3D). A window can consist of one or several graphs (multigraph window). A contextual menu appears when clicking in the graph background: it contains zooming tools and trace and marker managers. Another contextual menu is available by clicking in the window background.
Import
Allows you adding project(s) from a located directory into your Project Manager.
Infotrace
The infotrace is the information zone of a graph. It contains the legend and the marker tables. It can be displayed by pulling the bar on the right side of the window.
Layout
Display set-up, window arrangement, displayed results.
Log Window
The log window reports any action you have performed.
Marker
A marker is a tool for automatically obtaining coordinate values for displayed traces. Markers can be of several types: free, harmonic, peak, max, side band, and power band.
Marker table
The marker table is displayed in the infotrace.
Measurement
A measurement is a subpart of a project. It allows you to organize your setups and results.
Module
A module is a box that contains an analyzer mode. There are 3 types of module. Hardware control: I/O settings, recording, battery... Library: general analyzer resources management (filtering, trigger...) Analysis: 1 per analysis mode provided (Frequency analysis, Oct analysis...).
Monitor
The monitor is a particular type of plug-in analyzer. The monitor allows basic FFT setups and lets you observe the signal at any stage during the analysis process without stopping the measurement.
Operators
Allows you to make comparisons and averages between several traces.
Output signals
The output signals resource is the section where you can define the signals to be generated. Once defined the output signals can be selected from the analog outputs to be generated.
Player
The player is the tool for playing back recorded signals.
Plug-in analyzer
A plug-in analyzer is an analyzer plugged into NVGate®. The number and properties of the plug-in analyzer depend on your configuration.
Project manager
The project manager is part of the workspace. It allows you to organize and store all your data and setups. A project consists of several measurements.
Recorder
The recorder allows you to record time domain signals.
Results
Results are any type of data that can be saved for displayed.
Signal
A signal is a piece of raw data in the time domain.
Sub-module
A sub-module is a basic analyzer function and data processing operator.
Trace
A trace is the representation of a signal or a result. A multitrace graph is a graph containing several traces: it can be 2D or 3D.
Upload
Available only if the Teamwork instrument is connected to the PC. This is used to send a recorded signal file from the PC to the instrument. You can select to keep the signal onto the PC or to remove it after the upload.
Waterfall
A waterfall is a 3D display representing on one axis the frequency domain, on the vertical axis the amplitude and in the third dimension the change in the result during time, block numbers, or RPM.
Window
A window can contain one or several graphs (multigraph window).
Workbook
A workbook contains an analyzer status (ASB settings, setup, Control Panel, layout...).
Workspace
The workspace is the area grouping the ASB (Analyzer Setting Browser), the Control Panel, and the Project Manager. It is used for setting up, running and organization data within NVGate®.