Difference between revisions of "NVGate EVHV"

Jump to navigation Jump to search
2 bytes removed ,  20:22, 24 June 2020
m
English edits
m (English edits)
Line 1: Line 1:
==Introduction and Overview==
==Introduction and Overview==
===Objectives===
===Objectives===
The objective of the EVHV module is to characterize the electromagnetic forces which are responsible of the noise emission of an electric motor. In particular it will be achieved through 2 main steps:
The objective of the EVHV module is to characterize the electromagnetic forces which are responsible for the noise emission of an electric motor. In particular, it will be achieved through 2 main steps:


* eFrequencies determination and displays: They represent the characteristic frequencies that one may expect to find in the spectra. They are based on the specificities of the motor and depend on the RPM. For this reason, they are defined as harmonics.
* eFrequencies determination and displays: They represent the characteristic frequencies that one may expect to find in the spectra. They are based on the specificities of the motor and depend on the RPM. For this reason, they are defined as harmonics.
Line 11: Line 11:
''Sensors positioned for Spatiograms analysis''
''Sensors positioned for Spatiograms analysis''


Each spatiogram is a representative of a spatial distribution of the Electromagnetic forces. The sum of the participation of each spatiogram leads to the global vibration response. Determining the spatiogram responsible for the vibration harmonic that should be decreased is one of the major objectives of the EVHV module.
Each spatiogram is representative of a spatial distribution of the Electromagnetic forces. The sum of the participation of each spatiogram leads to the global vibration response. Determining the spatiogram responsible for the vibration harmonic that should be decreased is one of the major objectives of the EVHV module.


[[Image:EVHV_02.png|framed|none]]
[[Image:EVHV_02.png|framed|none]]
Line 134: Line 134:
===eMarkers===
===eMarkers===
The eMarkers associated to the eMachine can be displayed by clicking on the following icon [[Image:EVHV_27.png]]
The eMarkers associated to the eMachine can be displayed by clicking on the following icon [[Image:EVHV_27.png]]
. From the table one can apply the eMarkers to the relevant graphs (spectra, spectrograms, spatiograms).
From the table one can apply the eMarkers to the relevant graphs (spectra, spectrograms, spatiograms).


[[Image:EVHV_28.png|framed|none]]
[[Image:EVHV_28.png|framed|none]]
maintenancecenter, writer
115

edits

Navigation menu