Difference between revisions of "MultiPlane Balancing"

MultiPlane Balancing (view source)

2 bytes removed , 19:52, 24 June 2020

m

writer

240

edits

@@ Line 75: / Line 75: @@
 ====Measurement points and channels====
-A measurement point, connected to an instrument channels, is not necessarily linked to a correction plane. Vibration is measured at a bearing. There is not always the same number of channels as the number of planes. Nevertheless there should be enough channels to solve the problem. It is recommended to have at least one channel per balancing plane and relatively close to it.
+A measurement point, connected to an instrument channel, is not necessarily linked to a correction plane. Vibration is measured at a bearing. There is not always the same number of channels as the number of planes. Nevertheless there should be enough channels to solve the problem. It is recommended to have at least one channel per balancing plane or relatively close to it.
 [[Image:MULTIPLANE_BALANCING_14.png|framed|none]]