writer
240
edits
Difference between revisions of "NVGate Synchronous Order Analysis"
Jump to navigation
Jump to search
m
NVGate Synchronous Order Analysis (view source)
Revision as of 16:33, 2 June 2020
, 16:33, 2 June 2020→Order FFT
m (→Order FFT) |
m (→Order FFT) |
||
| Line 661: | Line 661: | ||
If a channel is selected, <nowiki>’</nowiki>Phase Ref<nowiki>’</nowiki> in ''SOA/Tach'' is not activated. | If a channel is selected, <nowiki>’</nowiki>Phase Ref<nowiki>’</nowiki> in ''SOA/Tach'' is not activated. | ||
Note: This set up | Note: This set up doesn<nowiki>’</nowiki>t change the spectrum phases and consequently doesn<nowiki>’</nowiki>t change the orders phases extracted from a waterfall of spectra. | ||
* '''Range''': Frequency range of the plug-in, set automatically in order to process the ''Sync Order x/Order FFT/Upper frequency'' value. For optimum performance, the ''Front End/Input sampling'' setting value should be close to the value of the Range setting multiplied by 2.56. For example: for a Range value of 20kHz, the input sampling should be 20000*2.56 = 51.2kS/s. | * '''Range''': Frequency range of the plug-in, set automatically in order to process the ''Sync Order x/Order FFT/Upper frequency'' value. For optimum performance, the ''Front End/Input sampling'' setting value should be close to the value of the Range setting multiplied by 2.56. For example: for a Range value of 20kHz, the input sampling should be 20000*2.56 = 51.2kS/s. | ||