Balancing
Balancing 2023 : What's new?
Balancing software is continuously improved to take into account the restraint of the field such as the impossibility to install a weight on the rotor, or use the own weights or comply some balancing custom rules.
Disable some rotor positions
On the field, there are many reasons that may lead to not allow the mounting of correction masses.
Indeed, a mechanical obstruction such as a welded weight may lead impossible adding or removing mass at some rotor positions.
The computed balancing masses given by the software must take into account this fact.
As shown below, rotor positions can be disabled in the correction prognosis in the software.
Correction weight from a database
Basically the software provide a couple of balancing masses at two consecutive positions, giving the right resulting correction vector.
On the field, it is not always possible to build the exact masses to be mounted.
Balancing software can take into account the actual weights to recommend the best distribution that will apply the right correction vector.
First, User has to register any weight in a database so that the software can take them for the computation.
Set max allowed weight per position
As a rule, a mass limitation per position have sometimes to be followed to prevent the mechanical integrity of the rotor. Hence, the balancing calculation will take into account this limitation.
Video Tutorial:
| Balancing Software | |
|---|---|
|
|
| Developer | Oros SA |
| Type | Balancing of rotating masses, Signal processing,Industrial Rotating machines, Vibration, |
| First release | 1995 |
| Latest Version | 2023 |
| Download | Here |
| Operating system: | Windows 10 (and W7) (see PC requirements) |
| Language | English, German, French, Japanese |
| Official website | Balancing on oros.com and here! |
The new version include single/dual and multiplane balancing inside the same software !
Manual Balancing 2022