Modal Install

Installation guide

Thank you for purchasing Modal software.

Modal is a dedicated tool for processing a comprehensive modal analysis.

Some tools are available to create your modal project from the beginning to the end.

Start with the construction of the geometry and the acquisition of data in an optimized window.

After these first steps, continue naturally by displaying very quickly Operating Deflection Shapes. Finally, with the powerful algorithms proposed, modal parameters: frequencies, damping, mode shapes can be easily obtained from either modal data or operating data.

This "INSTALLATION GUIDE" will help you to install and run the Modal software.

For getting detailed information on the software, you can go and visit the Online Help embedded within the software. For beginning to use your new modal software, you can follow the instructions in the ’Getting Started’ document installed simultaneous to the software.

---

Download

Download Last Version of Modal V5.7 from may 2020.

First checking

Required Configuration

Recommended PC configuration:

Here

Equipment required for the installation:

USB drive containing the Modal software installation setup "ModalSetup.msi"

Installation

Installation of the Modal Software

Run " ModalSetup.msi" program, and the following window is displayed:

Click on "Next", and the following window is displayed:

Read the terms in the license agreement and check “I accept the terms in the License Agreement”, and click on “Next”, the following window is displayed:

Select the installation directory. By default, Modal is installed in C:\OROS\Programs\Modal\. Click on "Next", the following window is displayed:

Click on "Install", the following window is displayed:

Wait while the Setup Wizard installs Modal, then the following window is automatically displayed:

Click on “Finish” to exit the Setup Wizard, and the Modal software is successfully installed.

NOTE: To launch the software correctly, please don’t forget to plug the dongle if your license is dongle locked, or connect the PC to the analyzer if your license is instrument locked.

Upgrade procedure

Upgrades available

Several upgrade possibilities are available for this software. If you have already purchased a version of Modal and that you want to acquire other options several possibilities can be proposed to you.

Upgrades:

1. 1. ORNVS-MOD330u: ORNVS-MOD300 to ORNVS-MOD300

Add EMA SIMO Identification method

1. 1. ORNVS-MOD350u: ORNVS-MOD330 to ORNVS-MOD350

Add EMA MIMO Identification methods

Options

1. 1. ORNVS-MOD200: Acquisition available on all OROS 3-Series analyzers

Option allowing to do acquisition directly in Modal

1. 1. ORNVS-MOD180: OMA (Option to ORNVS-MOD300 or ORNVS-MOD330)

Add OMA Identification method

Upgrade procedure

Upgrade order

If you order one of upgrades or options described above, a procedure should be followed:

Indeed, the number of the dongle is necessary to upgrade it.

You could find the number of your dongle directly written on it.

Please communicate it to OROS with your order simultaneously.

Software upgrade

- Uninstall the previous version of Modal installed on the PC:

Insert the CD in the appropriate driver and wait for the Autorun program (or run the "setup.exe" program from the CD).

The following window is displayed:

File:Modal Manual 21.png

Click on Remove.

The following window is displayed:

File:Modal Manual 22.png

Click on remove.

The following window is displayed.

File:Modal Manual 23.png

Wait during this window is displayed.

File:Modal Manual 24.png

Click on finish.

Start the installation of the new version

Please follow the procedure described from page 8 to page 13.