Hardware Specification OR3X TW

From OROS Wiki
(Redirected from Hardware Specification)
Jump to navigation Jump to search

General description

The following specifications concern OR352, OR363 & OR383 Teamwork instruments. These systems consist of OR3x hardware containing optional inputs and processing modules, a PC with an Ethernet interface, and NVGate® software with optional plug-in analyzers.

Modules

The following tables detail the complete capacity of OR352, OR363, & OR383 hardware system. Optional or standard modules may fill the described slots.

OR35

Front-end slots Dynamic and/or parametric analog inputs 2 slots of 4 universal inputs (BNC)
Dynamic analog outputs 1 slot of 2 outputs (BNC)
Externals sync 1 slot of 2 trigger/tachometer inputs (BNC)
Dynamic Inputs (+2) 1 slot of 2 dynamic inputs shared with Externals sync BNCs
Auxiliary slots 1 slot for: TEDS
Processor slots PC, Disk, Bus interfaces 1 slot
Clock synchronization 1 slot
Trigger / tachometer / monitoring 1 slot of 1 ForceDSP
Real-time Processing power 2 slots of 1 ForceDSP
Miscellaneous Internal hard drive 64 GB internal SSD
High speed serial ports 1 port for CAN Bus probe
Remote control (power control, NVTerm) 1 RS232 cable connection (RJ11)

OR36

Front-end slots Dynamic and/or parametric analog inputs 4 slots of 4 universal inputs (BNC)
Dynamic analog outputs 1 slot of 2 outputs (BNC)
Externals sync 1 slot of 2 trigger/tachometer inputs (BNC)
Auxiliary 2 slots of 2 inputs/outputs for optional outputs, Ext. sync or DC (parametric) inputs (BNC)
Auxiliary slots 1 slot for: TEDS
Processor slots PC, Disk, Bus interfaces 1 slot
Clock synchronization 1 slot
Trigger / tachometer / monitoring 1 slot of 1 ForceDSP
Real-time Processing power 4 slots of 1 ForceDSP
Miscellaneous Internal hard drive 128 to 256 GB removable SSD with USB 3.0 port
High speed serial ports 2 ports for CAN Bus probe
Remote control (power control, NVTerm) 1 RS232 cable connection (RJ11)

OR38

Front-end slots Dynamic and/or parametric analog inputs 4 slots of 8 universal inputs (BNC)
Dynamic analog outputs 1 slot of 2 outputs (BNC)
Externals sync 1 slot of 2 trigger/tachometer inputs (BNC)
Auxiliary 2 slots of 2 inputs/outputs for optional outputs or Ext. sync or DC (parametric) inputs (BNC)
Auxiliary slots 1 slot for: TEDS
Processor slots
PC, Disk, Bus interfaces 1 slot
Clock synchronization 1 slot
Trigger / tachometer / monitoring 1 slot of 1 ForceDSP
Real-time Processing power 8 slots of 1 ForceDSP
Miscellaneous Internal Hard drive 128 to 256 GB removable SSD with USB 3.0 port
High speed serial ports 2 ports for CAN Bus probe
Remote control (power control, NVTerm) 1 RS232 cable connection (RJ11)

Basic hardware configuration

Hardware unit contains at least the following modules. All the other modules are optional.

OR35

Font end

4 universal analog inputs, 2 analog outputs, 2 trigger/tachometer inputs + 2 analog dynamic inputs
Processors 1 interface board (Ethernet, CAN, Disk, USB)
1 Clock synchronization module
1 master ForceDSP module for Trigger / tachometer / monitoring.
1 ForceDSP computation module
Disk 64 GB internal SSD

OR36

Font end

4 universal analog inputs, 2 analog outputs, 2 trigger/tachometer inputs
Processors 1 interface board (Ethernet, CAN, Disk, USB)
1 Clock synchronization module
1 master ForceDSP module for Trigger / tachometer / monitoring.
1 ForceDSP computation module
Disk 128 GB removable SSD with USB 3.0 port

OR38

Front-end

8 universal analog inputs, 2 analog outputs, 2 trigger/tachometer inputs
Processors 1 interface board (Ethernet, CAN ,Disk, USB)
1 Clock synchronization module
1 master ForceDSP module for Trigger / tachometer / monitoring.
1 ForceDSP computation module
Disk 128 GB removable SSD with USB 3.0 port

Connections

Network

OR352, OR363 & OR383 can operate over multiple network configurations.

Connection to PC Ethernet 1 Gb/s / > 100 m / Cat 5E
Security Support SSH tunneling connections
IP management TCP/IP / The instrument can be DHCP server (non-authoritative)
Supported Networks WAN (Internet) / LAN (Company) / Wi-Fi (wireless)

Cascade

OR352, OR363 & OR383 can be cascaded flexibly.


Hardware spec 02.png

Specifications

Configuration Switchless daisy-chain / 30+ cascaded analyzers / Mixed analyzer's type
Connections NVGate: Ethernet 1Gb/s / Clock sync & Reference distribution : Ethernet 100 Mb/s
Cables > 100 m per connection / Variable lengths / Cat 5E
Master/Slave Undifferentiated analyzers' type
Accuracy Phase : > ±0.2° @ 20 kHz / > 8 ns @ 51.2 kS/s / Amplitude: > ±0.02 dB
Synch. protocol IEEE 1588.2 Precision Time Protocol / SyncE (synchronous Ethernet) - No phase shift
IP management Automatic IP check and resolution at NVGate start / DHCP server (non-authoritative)

Case

Mechanicals

OR35

Weight

3 kg (6.6 lb)

Dimensions

Case (w.h.d) 303 mm x 52 mm x 236 mm (11 15/16" in x 2 1/16" in x 9 9/32" in)
Overall (w.h.d) 310 mm x 58 mm x 245 mm (12 7/32" in x 2 9/32" in x 9 21/32" in)

OR36

Weight

5.6 kg to 6.1 kg (12.3 lb to 13.4 lb)

Dimensions

Case (w.h.d) 102 mm x 260 mm x 311 mm (4 1/32" in x 1 1/4" in x 12 25/32" in)
Overall (w.h.d) 114 mm x 280 mm x 325 mm (4 1/2" in x 11 1/32" in x 12 25/32" in)

OR38

Weight

7.9 kg to 8.8 kg (17.4 lb to 19.4 lb)

Dimensions

Case (w.h.d) 102 mm x 380 mm x 311 mm (4 1/32" in x 15" in x 12 25/32" in)
Overall (w.h.d) 114 mm x 400 mm x 325 mm (4 1/2" in x 15 3/4" in x 12 25/32" in)

Power supply

OR35

Power

< 30 VA

External AC Power supply

Voltage 100 to 240 VAC / 1.7 A max
Frequency 50/60 Hz
DCin Range

0 V to 28 V

Overload protection Absolute maximum < 40 V / > 31 V poles are disconnected
Battery Type Built-in 89 Wh Li-ion 8 modules
Autonomy 3 h
safety Certified under UN38.3 and IEC 62133 regulations
Charge time 3 h (typical)
Charge conditions DC power supply > 12 V

OR36

Power

< 60 VA

External AC Power supply

Voltage 100 to 240 VAC / 1.7 A max
Frequency 50/60 Hz
DCin Range

DC power voltage > 17 V will discard the battery to 28 V

Overload protection 31 V (over this voltage DC poles are short-circuited)
Battery Type NiMh 11 modules (no memory effect)
Autonomy 2 h
Charge time 2 h 30 min (typical)
Charge conditions DC power supply > 18 V

OR38

Power

< 100 VA

External AC Power supply

Voltage 100 to 240 VAC / 2.0 A max
Frequency 50/60 Hz
DCin Range

DC power voltage > 22 V will discard the battery to 28 V

Overload protection 31 V (over this voltage DC poles are short-circuited)
Battery Type NiMh 17 modules (no memory effect)
Autonomy 2 h
Charge time 3 h (typical)
Charge conditions DC power supply > 24 V

Environmental / Compliance with standards

CE/CB/FCC Indicates compliance with EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC
Safety EN 61010-1 Safety requirements for electrical equipment for measurement, control and laboratory use.
Over-voltage Cat. II (Local level mains, appliance, and portable equipment)
Pollution Degree 2: Do not operate in environments where pollutants may be present.
EMC Emission EN 50081-1 Generic emission standard: Residential, commercial and light industry.
EN 50081-2 Generic emission standard: Industrial environment.
IEC 61326-1 Electrical equipment for measurement control and laboratory use EMC requirements.
CISPR 22 Radio disturbance characteristics of information technology equipment: 22 Class B limits.
FCC Rules Complies with the limits for a Class B digital device.

EMC Immunity

EN 50082-1 Generic immunity standard: Residential, commercial and light industry.
IEC 61326-1 Electrical equipment for measurement control and laboratory use EMC requirements.
EN 50082-2 Generic immunity standard: Residential, commercial and light industry.
Linear input response range on interference max slew rate on input: 5 V/ µs
Materials ROHS 2011/65/EU
WEEE 2002/96/CE - 2003/108/CE - 2012/19/EU
Temperature OR35, OR36 Operating -20°C Requires a warmup (power on + run NVGAte) which last 1 min per 1 Celsius degree below zero. to 50°C (-4°F to 122°F)
OR38 Operating -20°C4 to 45°C (-4°F to 113°F)
Storage -20°C to 65°C (-4°F to 149°F)
Absolute maximum ratingii -35°C to 70°C (-31°F to 158°F)
Humidity Max 80 % RH at 40°C non condensing
Shocks Complies with IEC 68-2-27
Operating 100 m/s² (11 ms, ½ sine) and 700 m/s² (3 ms, ½ sine)
Storage 200 m/s² (11 ms, ½ sine) and 1 000 m/s² (3 ms, ½ sine)
Absolute maximum ratingii 1 000 m/s² (3 ms, ½ sine)
Vibrations Complies with IEC 68-2-6
Operating 10 m/s², 5-500 Hz, 5mm
Storage 25 m/s², 5-500 Hz, 5mm
Absolute maximum ratingii 30 m/s², 5-500 Hz, 5mm
Enclosure OR35 IP 40
OR36, OR38 IP 42

Radio frequencies sensibility

  Input measured with 50 Ω terminator
Radiated RF: 80-1000 MHz, 80% AM 1 kHz, 10 V/m < 20 µV
Conducted RF: 0.15-80 MHz, 80% AM 1 kHz, 10 V < 100 µV
Magnetic field: 30 A/m, 50 Hz < 2 µV

OR36 & OR38 Removable Disk

Performances Type 1.8" - SSD - 128 GB or 256 GB - MLC NAND Flash Memory
Shock 15 000 m/s² - 0.5 ms ½ sine
Vibrations 50 m/s² - 10 to 2 kHz
Throughput 32 inputs + 6 aux. @20 kHz BW – 10h 40min gap free
MTBF '2 x 106 'hours

Case

Case (w.h.d) 83 mm x 20 mm x 97 mm (3.24 in x 0.78 in x 3.79 in)
weight 0.200 kg (0.55 lb)
Connection Into the analyzer SATA - 1.5 Gb/s sustained read/write
To the PC USB 3.0 - 200 Mb/s sustained read
Power supply On PC USB powered
On analyzer Internal power supply

Front-end

Each front end slot of the OR35 (4 BNC + 2 BNC), OR36 (4 BNC) and the OR38 (8 BNC) can be occupied by one of the following inputs type:

  • Universal inputs
  • Dynamic inputs
  • Parametric inputs

Universal inputs

The universal inputs gather both dynamics and parametric input in the same board and connector. The universal inputs are necessary to support the XPod signal conditioners. The type of use of the universal inputs is selectable by software (NVGate) during the analyzer operations.

The universal inputs fulfill all the performances, precision and operability of each specific input type.

Dynamic inputs

Sampling

Sampling frequencies
(Additional decimators allow analysis bandwidth down to 0.8 Hz)
102.4 kHz, 65.536 kHz, 51.2 kHz, 37.768 kHz, 25.6 kHz,
16.384 kHz, 12.8 kHz, 8.192 kHz, 6.4 kHz, 5.12 kHz, 4.096 kHz, 3.2 kHz, 2.048 kHz
Converters One 24 bit 'sigma-delta ADC' for each input
Frequency relative precision 0.5 10-4 (typical 1 10 –5)
Synchronization All inputs synchronized on the same sampling clock

Anti-aliasing filter

Type Over-sampled digital filters
Slope > 400 dB/octave
Pass band ripple < ± 0.005 dB
Rejection of parasites bands > 100 dB (@ frequency > 0.57 x FS)
Effective bandwidth 0.45 x FS (ex: 23.4 kHz @ 51.2 kS/s)

Range (peak)

With amplifier (included) ±100 mV, ±300 mV, ±1 V
Direct ±10 V
With attenuator (included) ±40 V

Absolute accuracy

Resolution 24 bits (144 dB)
All input ranges at 1 kHz ±0.05 dB (typical ±0.015 dB)
Temperature variability < 0.002 dB / 10 °C

DC offset

±100 mV, ±300 mV and ±1V ranges < ± 100 µV
±10 V range < ± 1 mV
±40 V range < ± 2 mV




Frequency flatness and phase response (Includes channel to channel match with different ranges)
Inside one front-end
±10 V range, DC to 20 kHz < ±0.02 dB / < ±0.02 °
±10 V range, 20 kHz to 40 kHz < ±0.05 dB / < ±0.05 °
±0.1 V, ±0.3 V , ±1 V ranges, DC - 20 kHz < ±0.02 dB / < ±0.1 °
±0.1 V, ±0.3 V, ±1 V ranges, 20 kHz - 40 kHz < ±0.1 dB / < ±0.5 °
±40 V range, DC - 20 kHz < ±0.1 dB / < ±0.4°
±40 V range, 20 kHz - 40 kHz < ±0.1 dB / < ±0.8 °
Mixed front-ends
±10 V range, DC to 20 kHz < ±0.02 dB / < ±0.2 °

Cross-talk

Between N (N is odd) and N+1 inputs:  
@ 1 kHz: < -120 dB, @ 20 kHz: < -96 dB, @ 40 kHz: < -90 dB
Between any inputs excluding: N (N is odd) and N+1 inputs:
@ 1 kHz: < -140 dB, @ 20 kHz: < -114 dB, @ 40 kHz: < -108 dB

Signal to noise ratio

With 50 Ω terminators:
±10 V range, 40 kHz bandwidth: > 100 dB, spurious lines < -115 dB of full scale
±10 V range, 20 kHz bandwidth: > 104 dB, spurious lines < -125 dB of full scale

Input noise

With 50 Ω terminators:  
Thermal input noise 20nV/VHz
±100 mV and ±300 mV ranges 20 kHz BW < 3.5 µV rms, 40 kHz BW: < 5 µV rms
±1 V range 20 kHz BW < 5.4 µV rms, 40 kHz BW: < 8.5 µV rms
±10 V range 20 kHz BW < 44 µV rms, 40 kHz BW: < 70 µV rms


Impedance

  1 MΩ ±1 %, < 100 pF
Protection Overvoltage ±60 V peak without damage - On any inputii
Dynamic Spectral domain 140 dB 25601 lines / 30 sec. averaging

Coupling

AC -3dB Cut-off frequency 0.35 Hz ±10% (first order analog filter) See curve

DC

 
ICP 2 mA or 4 mA power supply with AC coupling (±10%)
ICP + TEDS ICP + reverse current on TEDS reading operations
GND Shortcut to ground - Automatic current limitation to 50 mA
Floating Coupling AC or DC / All ranges / overall voltage < ±40 V
Common mode voltage (all ranges) Max: ±12 V

TEDS

Standards

IEEE 1451.4 2001 revision 1

Supported templates Accelerometer/Force meter (25)
Microphones (27, 28 and 29)

Parametric (DC) inputs

The following parametric inputs can be added to the standard OR363 or OR383 hardware configuration as follows:

  • On the auxiliary slots by set of 2 inputs (max 4) DC inputs on auxiliary slots features 16 bit dedicated converters
  • On the OR36 as replacement of 4 dynamics inputs (max 12)
  • On the OR38 as replacement of 8 dynamics inputs (max 24)

The following specifications apply to the universal inputs.

Sampling

Bandwidth / Sampling -3 dB @ 3.5 Hz
Independent from dynamic sampling clock
Converters One 24 bit sigma-delta ADC for each input
Range (peak) Direct ±10 V
With attenuator (included) ±40 V
Frequencies rejection Notch filters frequencies 50 Hz & 60 Hz @ ±1%
Rejection > 120 dB

Amplitude

Effective resolution 22 bits (out of noise)
Linearity Typ. 0.0003 % of input range peak
Gain drift 20 ppm of input range peak/°C typ.

Offset

Offset ±10 V range: < ±1 mV / ±40 V range: < ±2 mV
Offset drift ±10 V range: < 40 µV/°C / ±40 V range: < 160 µV/°C

Impedance

  1 MΩ, 5 nF typ.

Protection

On any inputii ±60 V peak

Input Noise
With 50 Ω terminators, excepted ±40 V range:
Input noise < 4 µV rms in 0.1 to 2 Hz BW – Typ 2 µV rms
Max. Deviation < 6 µV peak

Dynamic outputs

Sampling Converters One 24 bit DAC for each output
Synchronization Same sampling clock as the dynamic inputs

Range

Direct ±10 V peak
With attenuator (included) ±1 V peak
Clipping User selectable in the output range
Digital gain From 10-5 to 103
Absolute accuracy Resolution 24 bits (144 dB)
All output ranges at 1 kHz ±0.05 dB
Temperature variability < 0.1 dB / 10 °C
Frequency response Variation relative to 0 dB @ 1kHz
All ranges, at 10 kHz < ±0.05 dB
All ranges, at 20 kHz < ±0.15 dB
All ranges, at 40 kHz < ±0.8 dB

Dynamic outputs (continued)

Noise floor level 10 V range, 20 kHz bandwidth
10 V range, 40 kHz bandwidth
1 V range, 20 kHz bandwidth
1 V range, 40 kHz bandwidth

Impedance

User selectable 50 Ω, 600 Ω or Grounded

Current

Max  ±10 mA

Protection

Sum of injected + generated voltages ±15 V peak, On any outputii
Permanent short circuit supported

Total harmonic distortion

THD @ 1 kHz < 0.002% or -94dB at 20 kHz BW
THD @ 5 kHz < 0.005% or -86dB at 20 kHz BW

Cross-talk

Output 0 dBV to 50 Ω terminated input

Lower than measurable noise

External sync

Sampling

Frequencies 64 times over-sampling of the current input sampling
(up to 6.4 MHz)
Converters High speed voltage comparator and time counter
Ranges (peak)   ±300 mV, ±1 V, ±3 V, ±10 V, ±40 V
Resolution Amplitude accuracy ±1% of range
Setting Hysteresis 1% (of input range) to input range
Hold off 0 s to 500 s
Slope Rise or fall
Hardwired pre-divider 1 to 255
Accuracy Time resolution > 160 ns (0.06° at 1 kHz and 1.2° at 20 kHz)
Pulse rate Max 375 kpulse/s
Coupling AC -3dB Cut-off frequency 0.35 Hz ±10% (first order analog filter)

DC

 
Impedance   1 MΩ, < 100 pF
Protection on any external syncii ±60 V peak without damage

Expander modules (XPod)

With the universal inputs the OR352, OR363 and OR383 can receive signal conditioning modules called XPod. Different Xpod types are available.

Wheatstone bridge XPod

Connectors Type Sub-D9 – Female
Bridges Mounting Full, Half and quarter
½ bridge completion resistors 2 * 10 kΩ - 0.1% - 10 ppm
¼ bridge completion resistors 120 Ω or 350 Ω - 0.1% - 25 ppm
Excitation voltages 0 to 10 V
Excitation currents 0 to 4 V: < 30 mA - 4 V to 10 V: < 12 mA
Sensing Negative and positive probes
Amplifiers Type Differential - DC capable
Gains 10 or 100
Error < 0.01 dB
Inputs Ranges ±100 mV - ±1 V
Common mode voltage ±7 V without limiting differential input
Impedance 1 MΩ
Noise floor levels (100 Hz to 20 kHz) Gain 100: 2 µVrms - Gain 10: 4 µVrms
DC offset Temperature drift 1 µV/°C
Compensation resolution 3 % of present offset
Protection Overvoltage Device on: max ±30 V - device off: max ±15 V

Temperature XPod

The temperature XPod operates on the universal or parametric inputs. The XPod support thermocouple and RTDS conditioning, cold point compensation and linearization. Amplified signal are injected in the analyzer on the ±10 V range.

Connectors Type Mini Thermocouple/RTD type
Pins 3 polarized pin - spring-loaded - compatible with 2 point plugs
Material Glass filled thermoplastic - White body
Thermocouples Type J -210 °C to +1 100 °C - Yellow LED
Type K -200 °C to +1 300 °C - Green LED
Type T -200 °C to +390 °C - Brown LED
Type N<ref>) Add 0.1°C to absolute temperature error</ref> -200 °C to +1 200 °C - Pink LED
Type E -200 °C to +800 °C - Purple LED
Cold compensation Integrated - 2 sensors - user on/off
Absolute temperature error > -150 °C : ±0.9°C / < -150 °C : ±(0.4°C + 0.1% of MT<ref>) MT is Measured Temperature</ref>)
RTDS PT 100 -190 °C to +880 °C* – Blue LED
PT 1000 -190 °C to +880 °C* - Grey LED
Absolute temperature error ±(0.4°C + 0.3% of MT9)
Wires 3 wires connections
Current PT100: 500 µA to 4 mA - PT1000: 500 µA to 1 mA

*Calibrated up to +800 °C

CAN BUS probe

The CAN bus probe is connected to the OR352, OR363 and OR383 via the high speed serial ports. It offers a passive CAN bus listener with the following specifications.

Type

Standards CAN 2.0A & CAN 2.0B / Compliant with J1939 protocol
Speed 125 kb/s to 500 Mb/s
Probe Probe High Z / Analyzer or bus powered
Connectors CAN : Sub-D 15 / Analyzer: High speed serial port (1,5 m)
Capacity Channels 24 @ 10 Hz refresh rate / Synchronous with analyzer inputs

Digital computation

The following table details the calculation needs (SPUs) for each analysis plug-in of NVGate software.

Narrow band analysis (FFT) Real-time FFT analysis with;
401 lines (for 801, 1601,3201, 6401 lines, multiply requested SPU respectively by 1.25, 1.5, 2, 3)
20 kHz bandwidth (Requested SPU are proportional to bandwidth)
0% overlap
1 channel processing requires 1 SPU
Synchronous order analysis Real-time order spectrum analysis (re-sampled time signal) with:
Any duration of visualization, any averaging
20 kHz bandwidth (Requested SPU are proportional to bandwidth)
1 channel processing requires 3 SPUs
Time Domain analysis Real-time time domain monitor and statistical analysis with:
Simultaneous time view and statistical extraction. Any duration of visualization, any averaging
20 kHz bandwidth (Requested SPU are proportional to bandwidth)
1 channel processing requires 3 SPU
1/n Octave Real-time filter based 1/n octave analysis with:
1/3rd octave (for 1/12th and 1/24th octave multiply requested SPU respectively by 2 and 4)
20 kHz bandwidth (Requested SPU are proportional to bandwidth)
1 channel processing requires 3 SPUs
Recorder Gap free recording with:
51.2 kHz sampling rate gap free recording
1 channel processing requires: 0.66 SPU

Signal Processing Units

SPU (Signal Processing Units): the previous table gives the characteristics of each analysis mode and the associated SPU consumption. For multi-analysis purpose, add the corresponding SPUs of each mode used simultaneously and increase the sum by 10%. "Real-time" means that the analysis speed is faster than the input rate and does not miss any sample.

Special DSPs modules

The following DSPs are always integrated in OR35, OR36 & OR38 hardware.

Master DSP module

Monitor computations FFT 401 lines (max 4 Channels)
Time domain detectors DC, Max, Min, RMS, Kurtosis (on the monitor Channels)
Special Auxiliary inputs, Events, Tachs, Torsion, Generators

Computation DSPs modules

The following computation DSP modules are optional

ForceDSP

Type

Sample size 32 bit floating
Computation words 32/40 bit
Internal memory 16 MSample
Power

Computation capability

Up to 48<ref>: SPUs are variable in ForceDSPs. Consult customer.care@oros.com for advanced real-time analysis</ref> SPU / DSP module
Input sharing Inputs per DSP 8 max

Number of DSPs/unit

Minimum

1 Computation DSP module

Up to 4810 SPU

OR35 Max. 2 Computation DSP modules

Up to 9610 SPU

OR36 Max. 4 Computation DSP modules

Up to 19210 SPU

OR38 Max. 8 Computation DSP modules

Up to 38410 SPU

Notes

The previous specifications describe all the guaranteed capacities and performances of the instrument and are applicable to an OR352-10, OR363-16 or OR383-32 hardware powered for more than 15 minutes at a stabilized room temperature of 23°C ±5°C and calibrated since less than one year.

The adapted control software NVGate is described separately.


i Prepared for future use: the related specifications or options are in development.

ii Exceeding absolute maximum ratings damages the system and voids guarantee.

Specifications not binding; OROS reserves its right to change these specifications without notice.