Difference between revisions of "NVGate Project manager"

NVGate Project manager (view source)

1,380 bytes removed , 11:49, 12 January 2022

9,121

edits

@@ Line 348: / Line 348: @@
-====Project====
-* '''Save: '''This command is available only on the current project. It saves the project workbook.
-* '''Save as: '''This command is available only on the current project. It saves the project with a different name. It is a way of copying the current project.
-*'''Properties:''' This command gives general information about the project.
-[[Image:Project_Manager_User_Pref2_62.png|framed|none]]
-It is possible to modify the project attribute. When "Read-only" is selected, it is not possible to modify the project. When "Read-only to all other users" is selected, the project cannot be modified by another user, but can be used freely.
-"Allow access to" property must be set on "All users" to enable restricted users to use this project.
-A comments area is available to add information. (Use "Ctrl <nowiki>+</nowiki> Return" to start a new line).
-The "Stand alone" button is available only when the project is linked to a stand-alone session. It gives information about the session and may be used to abort the session.
-*'''Rename:''' This command is not available on the current project (Use "Save As" instead). It may be used to change the name of the project.
-*'''Load:''' This command loads the selected project. The project becomes the current project.
-*'''Remove:''' This command removes the selected project. The data contained is lost permanently.
 ====Workbook====