Difference between revisions of "NVGate Ribbons: Home Tab"

Jump to navigation Jump to search

NVGate Ribbons: Home Tab (view source)

Revision as of 09:51, 12 January 2022

3,098 bytes removed ,  09:51, 12 January 2022
→‎Working set
Line 309: Line 309:




===Working set===
Even if the Share/Collate features allow reducing the number of data directly available in the working set (NDLR the NVGate environment), it is useful being able to reduce the visible ''Items'' to the current concern. The Filter Project provides such selection.
[[Image:Reports_Tools_Ribbons_231.png]] Workspace: show/Hide the workspace windows that contains the Analyzer Setting Browser (ASB), the Project Manager (PM) and the Control Panel (CP).
[[Image:Reports_Tools_Ribbons_232.png|framed|none]]
Only one panel is displayed at a time. The user may switch between panels by clicking on the title bar of the desired sheet.
[[Image:Reports_Tools_Ribbons_233.png]] Log window: This windows track all changes in the analyzer. Logs are arranged in 3 separate tabs:
* ''Analyzer settings:'' Display all users<nowiki>’</nowiki> and dependencies related changes in the ASB.
* ''Warning:'' Displays dynamic warnings related to the current setup (ex A & C acoustic filters are no more available when the sampling frequency is lower than 25.6 kHz). Raising a warning will automatically show the log window during 3 sec.
* ''Macro trace'': log window for macro execution and debugging.
[[Image:Reports_Tools_Ribbons_234.png|framed|none]]
Recommended location: ''Bottom, Docked''
[[Image:Reports_Tools_Ribbons_235.png]] Status: Displays the current status of the plug-ins (''see chapter 1 ASB for details''). General statuses are displayed in the bottom status bar, the Status window is made to show advanced status for accurate control of the acquisition/analyses. To add the statuses in this window, right click in the selected plug-in and select ''View states''
[[Image:Reports_Tools_Ribbons_236.png|framed|none]]
Recommended location: ''Bottom, Docked''
Example for the FFT plug in you may display:
* ''Block Overload:'' corresponds to the instantaneous overload indication within 1 FFT trigger block, for instance during a few milliseconds overload occurred, the current trigger block indicates overload, the following trigger block may not have any overload so indication "no overload" will be seen
* ''Analysis Overload:'' corresponds to overload indication over the measurement period. It means that during the whole measurement period there was (or not) an overload.
For instance: during a measurement, a short overload occurs, Block Overload will indicate "Overload on Channel x", Analysis Overload will indicate "Overload on Channel x", after overload occurred, Block Overload will indicate "No Overload", Analysis Overload will indicate "Overload on Channel x".
When pressing run again, Block Overload and Analysis Overload status will be reset.
When using Automatic overload rejection in FFT, Analysis Overload status take into account any occurring overload despite FFT block rejecting them for FFT calculation, the user will anyhow keep a trace of occurred overload.
These windows can be docked or floating. Environment windows are to be displayed temporarily for advanced setup. It is recommended to hide these windows for standard measurement/analyses.


===Preferences group===
===Preferences group===
Retrieved from "https://wiki.oros.com/index.php?title=Special:MobileDiff/9908"

Navigation menu