1,042
edits
Difference between revisions of "NVGate Display"
Jump to navigation
Jump to search
→Orbit
(→Orbit) |
|||
| Line 1,055: | Line 1,055: | ||
Displays the AC dynamic motion of the center of a rotating shaft. It generates a two-dimensional image. | Displays the AC dynamic motion of the center of a rotating shaft. It generates a two-dimensional image. | ||
'''Source Signals'''<br> | |||
The following results may be displayed as Orbit graphs on condition that a tachometer is associated to the plug-ins: | The following results may be displayed as Orbit graphs on condition that a tachometer is associated to the plug-ins: | ||
| Line 1,078: | Line 1,078: | ||
The display of the Synthesized Orbit is done on 360 points (1 point per degree). | The display of the Synthesized Orbit is done on 360 points (1 point per degree). | ||
'''Properties'''<br> | |||
[[Image:Display_Graphs_Traces_123.png|framed|none]] | [[Image:Display_Graphs_Traces_123.png|framed|none]] | ||
* X Axis | * '''X Axis:''' | ||
:-'''Linear:''' uses linear scale for X-axis units. | |||
* Y Axis | * '''Y Axis:''' | ||
:-'''Linear:''' uses linear scale for Y-axis units. | |||
* Display mode | * '''Display mode:''' | ||
:-'''Multi-graph:''' overlays all traces on a single graph. | |||
:-'''Multi-trace:''' displays all traces using one graph per trace in the same window. | |||
* Trace color | * '''Trace color:''' | ||
:-'''Number:''' selects the trace number for color modification. | |||
:-'''Color box:''' click on this box to modify the color of the selected trace. | |||
:-'''Filling mode:''' if selected, all the curves of the windows are filled from: | |||
::the bottom of the area if Y scale is dB or Logarithmic, | |||
::the 0 value if the Y scale is linear. | |||
* Rotation indicator | * '''Rotation indicator:''' | ||
:-'''Counter-Clockwise:''' defines a counter-clockwise rotation | |||
:-'''Clockwise:''' defines a clockwise rotation. | |||
* Autoscale | * '''Autoscale:''' | ||
:-'''Continuous:''' applies a continuous autoscale during the measurement. | |||
:-'''Disabled:''' disable the autoscale. | |||
* Orientation | * '''Orientation:''' Allows to shift X-axis and Y-axis from a defined angle to the left or to the right; X and Y are nevertheless always orthogonal. | ||
* '''Number of revolutions:''' Number of revolution displayed in the graph. | |||
* Number of revolutions | |||
====Gap==== | ====Gap==== | ||