9,121
edits
Difference between revisions of "NVGate GoToResult"
Jump to navigation
Jump to search
→Parameters
| Line 170: | Line 170: | ||
3. Activate the plug-in tach with this combo box. The tachometer properties will be proposed just after selecting the tach. The corresponding input (dynamic, or ext. synch) is automatically activated. <br>NB: The selected tachometer is associated with the plug-in. For profile and waterfall results, the corresponding tachometer is showed as: XXX tach (ex. FFT1 tach, or SOA2 tach) | 3. Activate the plug-in tach with this combo box. The tachometer properties will be proposed just after selecting the tach. The corresponding input (dynamic, or ext. synch) is automatically activated. <br>NB: The selected tachometer is associated with the plug-in. For profile and waterfall results, the corresponding tachometer is showed as: XXX tach (ex. FFT1 tach, or SOA2 tach) | ||
4. | 4. Click on the engine tachometer icon will automatically change the waterfall trigger on mode : '''"delta RPM or periodic"'''. This will make the setup of NVGate much more easier for a rotating or run up application. | ||
This button also create the following events: | |||
Create a Delta RPM event, source = the one activated in the "Tach.". Delta velocity : 10 RPM. | |||
Create a Periodic event (0.5 sec) | |||
Create a Combined event 1. mode: "Delta RPM OR Periodic 1" | |||
Set waterfall Trigger to Combined event | |||
Create of an RPM event (source = the one activated in the tach field) | |||
(This button is only available on profile or waterfall tab) | |||
=====Step 3 Results overview===== | =====Step 3 Results overview===== | ||