1,042
edits
Difference between revisions of "NVGate Project manager"
Jump to navigation
Jump to search
→Signal
(→Signal) |
|||
| Line 547: | Line 547: | ||
====Signal==== | ====Signal==== | ||
*'''Preview:''' This command displays an overview of the signal. This command is available, even if the signal is on the analyzer hard disk and NVGate<sup></sup> is in office mode. | |||
This command displays an overview of the signal. This command is available, even if the signal is on the analyzer hard disk and NVGate<sup></sup> is in office mode. | |||
[[Image:Project_Manager_User_Pref2_69.png|framed|none]] | [[Image:Project_Manager_User_Pref2_69.png|framed|none]] | ||
*'''Load in Player:''' This command loads the signal file to the player. It is then possible to display this signal, play the tracks on output, and perform post analysis. | |||
This command loads the signal file to the player. It is then possible to display this signal, play the tracks on output, and perform post analysis. | |||
{|border="0" cellspacing="2" width="100%" | {|border="0" cellspacing="2" width="100%" | ||
| Line 561: | Line 559: | ||
|} | |} | ||
*'''Load and preview:''' This command combines the two previous commands. | |||
This command combines the two previous commands. | |||
*'''Post-Analyze:''' This command loads the signal in the player and display the menu <nowiki>'</nowiki>track connections<nowiki>'</nowiki> in order to define your post-analysis (drag and drop connected tracks to the plug-in analyzer you want to use). | |||
This command loads the signal in the player and display the menu <nowiki>'</nowiki>track connections<nowiki>'</nowiki> in order to define your post-analysis (drag and drop connected tracks to the plug-in analyzer you want to use). | |||
[[Image:Project_Manager_User_Pref2_70.png|framed|none]] | [[Image:Project_Manager_User_Pref2_70.png|framed|none]] | ||
| Line 571: | Line 567: | ||
If the time signal is recorded on the PC or on the Mobi-disc<sup>™</sup>, it is highly recommended to be in office mode (hardware inactive) in order to avoid low performances and malfunctions. | If the time signal is recorded on the PC or on the Mobi-disc<sup>™</sup>, it is highly recommended to be in office mode (hardware inactive) in order to avoid low performances and malfunctions. | ||
*'''Download:''' This command is available only when hardware with a hard disk is connected and when the signal has not yet been downloaded. It transfers the recorded signal from the analyzer hard disk to the PC hard disk. | |||
This command is available only when hardware with a hard disk is connected and when the signal has not yet been downloaded. It transfers the recorded signal from the analyzer hard disk to the PC hard disk. | |||
*'''Upload:''' This command is available only when hardware with hard disk is connected and when the signal is not on the hard disk. It transfers the recorded signal from the PC hard disk to the analyzer hard disk | |||
This command is available only when hardware with hard disk is connected and when the signal is not on the hard disk. It transfers the recorded signal from the PC hard disk to the analyzer hard disk | |||
*'''Remove:''' This command enables to remove the selected signal from the PC if the file is on the PC hard disk and from the analyzer hard disk of the hardware if connected and if the file is on the analyzer hard disk. | |||
This command enables to remove the selected signal from the PC if the file is on the PC hard disk and from the analyzer hard disk of the hardware if connected and if the file is on the analyzer hard disk. | |||
[[Image:Project_Manager_User_Pref2_71.png|framed|none]] | [[Image:Project_Manager_User_Pref2_71.png|framed|none]] | ||
| Line 584: | Line 577: | ||
If, after removal, the file is not on the PC, or on the analyzer, the signal is permanently lost. | If, after removal, the file is not on the PC, or on the analyzer, the signal is permanently lost. | ||
*'''Export:''' This command is used to export the signal in an external format. | |||
This command is used to export the signal in an external format. | |||
[[Image:Project_Manager_User_Pref2_72.png|framed|none]] | [[Image:Project_Manager_User_Pref2_72.png|framed|none]] | ||
| Line 593: | Line 585: | ||
See more details about the export formats in the "Export" topic from the "User preferences". | See more details about the export formats in the "Export" topic from the "User preferences". | ||
*'''Properties:''' This command gives general information about the result. | |||
This command gives general information about the result. | |||
[[Image:Project_Manager_User_Pref2_73.png| | [[Image:Project_Manager_User_Pref2_73.png|400px|none]] | ||
<br> | |||
[[Image:Project_Manager_User_Pref2_01.png| | [[Image:Project_Manager_User_Pref2_01.png|400px|none]] | ||
'''Change date: '''allows to change the date of the beginning of the signal. It is used to display the absolute time. | |||
====Attachments==== | ====Attachments==== | ||