1,042
edits
Difference between revisions of "NVGate Ribbons: Analysis"
Jump to navigation
Jump to search
NVGate Ribbons: Analysis (view source)
Revision as of 17:15, 14 December 2021
, 17:15, 14 December 2021→Record group
| Line 21: | Line 21: | ||
| '''Recorder settings''': Give a direct access to the [[NVGate_Recorder#Settings|Recorder settings]]. | | '''Recorder settings''': Give a direct access to the [[NVGate_Recorder#Settings|Recorder settings]]. | ||
|- | |-valign="top" | ||
|[[File:Analysis_recorder_settings_2022.PNG|30px]] | |[[File:Analysis_recorder_settings_2022.PNG|30px]] | ||
| '''Record status''': Controls the recorder location and activity. | | '''Record status''': Controls the recorder location and activity. | ||
* If the setting is set to Off, the icon is grayed | * If the setting is set to Off, the icon is grayed. | ||
* If the setting is set to PC, the signals are recorded on the PC HDD. | * If the setting is set to PC, the signals are recorded on the PC HDD. | ||
* If the setting is set to Analyzer, the signals are recorded on the analyzer's disk. | * If the setting is set to Analyzer, the signals are recorded on the analyzer's disk. | ||
| Line 36: | Line 36: | ||
| '''Arm''' (CTRL+SHIFT+R): Arm the recorder. Prepare the recorder to start immediately on the run. Arming process can lap a few seconds. If the recorder is not armed, it will take a few second to achieve the arming prior to effectively start recording the data. ''Note: modifying a setting of the analyzer will disable the arming. It is then necessary to re-arm it.'' | | '''Arm''' (CTRL+SHIFT+R): Arm the recorder. Prepare the recorder to start immediately on the run. Arming process can lap a few seconds. If the recorder is not armed, it will take a few second to achieve the arming prior to effectively start recording the data. ''Note: modifying a setting of the analyzer will disable the arming. It is then necessary to re-arm it.'' | ||
|- | |-valign="top" | ||
|[[File:Analysis_recorder_settings_2022.PNG|30px]] | |[[File:Analysis_recorder_settings_2022.PNG|30px]] | ||
| '''Trigger''' (CTRL+T): Generate a manual trigger event. This event is available for the event list and can be associated to the plug-in triggers (start/stop or trigger). See acquisition tab description. ''Warning: While the manual trigger is not associated to a plug-in, it has no effect.'' | | '''Trigger''' (CTRL+T): Generate a manual trigger event. This event is available for the event list and can be associated to the plug-in triggers (start/stop or trigger). See acquisition tab description. ''Warning: While the manual trigger is not associated to a plug-in, it has no effect.'' | ||