|
|
| Line 47: |
Line 47: |
| [[Image:tacho_ratio.png|framed|none]] | | [[Image:tacho_ratio.png|framed|none]] |
|
| |
|
| * '''Tach ratio''': this is the ratio between the output angular speed and the input angular speed. This setting is defined by the product of 2 fractions: N1/D1 * N2/D2 where N1, D1, N2 and D2 are integer values. Tach.1 / Tach.2 ratio maximum value can be set up to 100. | | *'''Tach ratio''': this is the ratio between the output angular speed and the input angular speed. This setting is defined by the product of 2 fractions: N1/D1 * N2/D2 where N1, D1, N2 and D2 are integer values. Tach.1 / Tach.2 ratio maximum value can be set up to 100. |
| [[File:Tach ratio.png|framed|none]] | | [[File:Tach ratio.png|framed|none]] |
|
| |
|
| |
| See ''Ext Sync §'' for details
| |
|
| |
| * '''Average size''': defines the average number used to compute the average speed. Revolution number n average speed is: avrg_speed<nowiki>[</nowiki>n-1<nowiki>]</nowiki> <nowiki>+</nowiki> (inst_speed<nowiki>[</nowiki>n-1<nowiki>]</nowiki> - avrg_speed<nowiki>[</nowiki>n-1<nowiki>]</nowiki>) / avrg_size.
| |
| * '''Max speed''': predefine a maximum angular speed to preset the scale and order tracking maxima. The limit of Max speed depends on the sampling frequency of the input signal and is equal to: 60 * Fe / (2 * 2.56) for the maximum. The Max speed setting is also used:
| |
| * to specify the limit of Y axis of the RPM profile result
| |
| * to compute the limit of the maximum order of the SOA plug-in analyzer.
| |
| * '''Min speed''': defines the lowest measured angular speed. All revolutions with a speed lower than Min speed are forced to 0 RPM. By default Min speed is expressed in RPM. Min speed is automatically adjusted to Max speed/1000 but it is possible to go lower.
| |
|
| |
|
| == Up to 3 real time: plug in SOA == | | == Up to 3 real time: plug in SOA == |