Difference between revisions of "NVGate Tachometer"

NVGate Tachometer (view source)

4 bytes removed , 15:54, 4 November 2021

1,042

edits

@@ Line 380: / Line 380: @@
 '''Tach:''' On / Off. Used to activate a tachometer with an RPM level proportional to the DC level.
-Rotation: Depending on the way you look at a measured shaft or on the convention you are using, the shaft may be considered as rotating clock wise or counter clock wise. This has noticeable impact on the phase of spectra and orders.
+Rotation: Depending on the way you look at a measured shaft or on the convention you are using, the shaft may be considered as rotating clockwise or counterclockwise. This has noticeable impact on the phase of spectra and orders.
 ''Hidden/fixed: Hidden if Tach is Off.''
@@ Line 393: / Line 393: @@
 * To compute the limit of the maximum order of the SOA plug-in analyzer.
 '''Min speed''': defines the lowest measured angular speed. All revolutions with a speed lower than Min speed are forced to 0 RPM. By default Min speed is expressed in RPM. Min speed is automatically adjusted to Max speed/1000 but it is possible to go lower.
-* '''Rotation:''' This setting defines the way the phase variation is counted: clockwise or counter-clockwise for each tachometer.
+* '''Rotation:''' This setting defines the way the phase variation is counted: clockwise or counterclockwise for each tachometer.
 The rotation side is managed independently for each tachometer (Ext. sync, input, D, combined and fractional).  Default setup is ''Counterclockwise'';