Difference between revisions of "NVGo"

NVGo (view source)

38 bytes removed , 15:45, 7 December 2020

8,877

edits

@@ Line 54: / Line 54: @@
+Refresh the instrument list.  When your OR10 appears showing "Ready", click on it to start NVGo with this instrument.
-Refresh the instrument list.  When your OR10 appears showing "Ready", click on it to start NVGo with this instrument.
-----
 Main screen :
-[[Image:MODS_49.png|framed|none]]
+[[Image:MODS_49.png|700px]]
-----
 ====LiveView====
 ''LiveView ''screen shows the spectra and trigger blocks of the 2 highlighted inputs of the left column.
-[[Image:MODS_50.png|framed|none]]
+[[Image:MODS_50.png|700px]]
 Displayed inputs are changed by swiping the graph up/down. It is also possible to select the displayed inputs by pressing the selected input from the left column.
@@ Line 76: / Line 75: @@
 Y scale may be set to linear or log. This preference is saved in the Android device.
-----
 ====Signal====
 ''Signal ''shows the raw data envelope of the 2 highlighted inputs of the left column.
-[[Image:MODS_51.png|framed|none]]
+[[Image:MODS_51.png|700px]]
 Displayed inputs are changed by swiping the graph up or down. It is also possible to select the displayed inputs by pressing the selected input from the left column.
@@ Line 90: / Line 88: @@
 ''Levels ''shows the RMS and Peak levels of all dynamic inputs together.
-[[Image:MODS_52.png|framed|none]]
+[[Image:MODS_52.png|700px]]
 ====Playback====