Difference between revisions of "NVGate Filter Builder"

NVGate Filter Builder (view source)

4 bytes added , 14:53, 4 December 2020

writer

544

edits

@@ Line 36: / Line 36: @@
 * '''Filter order''': The filter order can be selected from 1 to 40 in Office mode, and from 1 to 10 in Connected mode. The higher the order is, the steeper the cut-off slope is.
 * '''Applied to''': Shows which plug-in the filter is applied to. The construction of the filter requires applying it to a signal with the same bandwidth. The determination of the associated plug-in/bandwidth is automatic. Deactivate the filter to reset.
-The other modules (front-end, monitor, resources) operate at the front end input sampling frequency (in connected mode on-line) or at the max player bandwidth (in post analysis mode).
+: The other modules (front-end, monitor, resources) operate at the front end input sampling frequency (in connected mode on-line) or at the max player bandwidth (in post analysis mode).
 {|border="2" cellspacing="0" cellpadding="4" width="59%" align="center"
@@ Line 52: / Line 52: @@
 |}<br clear="all">
-Note that even if plug-ins run in the same bandwidth, it’s not possible to share filters between different plug-ins.
+: Note that even if plug-ins run in the same bandwidth, it’s not possible to share filters between different plug-ins.
 * '''Cut'''-'''off frequency''': The cut-off frequency of the filter. The maximum value is the input frequency range '''FR'''. The minimum value is '''FR''' / 50000 in the Office mode, and '''FR''' / 40000 in the Connected mode.