Difference between revisions of "Balancing single/dual plane"

Balancing single/dual plane (view source)

2 bytes added , 10:51, 24 June 2020

847

edits

@@ Line 235: / Line 235: @@
 To choose your transducer from the transducer data base, click on '''Transducer'''.
+====Transducer database====
+[[Image:Balancing_22.png|framed|none]]
+''Transducer data base''
+For easier and faster adjustment use the transducer data base.
+Input your transducer in the list shown by clicking the corresponding fields and adjust an input transducer label, unit and sensitivity.
+To select a transducer click in the corresponding line, and choose the analyzer channel, where this transducer is connected to. Click '''Set.'''
+The transducer data base can be saved and reloaded.
+It is also possible to create several data bases for example for different users and their transducers.
 '''Notice: '''Your tach signal must have one pulse per revolution.
@@ Line 276: / Line 293: @@
 * Click "Continue" to proceed to the next step.
-====Transducer database====
-[[Image:Balancing_22.png|framed|none]]
-''Transducer data base''
-For easier and faster adjustment use the transducer data base.
-Input your transducer in the list shown by clicking the corresponding fields and adjust an input transducer label, unit and sensitivity.
-To select a transducer click in the corresponding line, and choose the analyzer channel, where this transducer is connected to. Click '''Set.'''
-The transducer data base can be saved and reloaded.
-It is also possible to create several data bases for example for different users and their transducers.
 ----