Difference between revisions of "Balancing single/dual plane"

Jump to navigation Jump to search

Balancing single/dual plane (view source)

Revision as of 16:43, 23 June 2020

67 bytes removed ,  16:43, 23 June 2020
→‎Activation of measurement channels
Line 239: Line 239:
''Project generation''
''Project generation''


====Activation of measurement channels====
====Select the configuration of the machine====
Depending on the number of balancing planes and sensors used, one, two or four channels are needed.
This window, called "Analyser" help you to quickly setting up your measurement.


Choose what you need for your measurement, by clicking on '''A, B, C''' or '''D''' or use the following shortcuts: <nowiki>[</nowiki>Alt<nowiki>]</nowiki> <nowiki>+</nowiki> <nowiki>[</nowiki>A<nowiki>]</nowiki>, <nowiki>[</nowiki>Alt<nowiki>]</nowiki> <nowiki>+</nowiki> <nowiki>[</nowiki>B<nowiki>]</nowiki>, <nowiki>[</nowiki>Alt<nowiki>]</nowiki> <nowiki>+</nowiki> <nowiki>[</nowiki>C<nowiki>]</nowiki>, <nowiki>[</nowiki>Alt<nowiki>]</nowiki> <nowiki>+</nowiki> <nowiki>[</nowiki>D<nowiki>]</nowiki>
First, select the configuration of your machine according to the number of planes, the geometry of the rotor (pos. of planes and bearings) and the number of vibration sensors.


The corresponding channels are activated. This is shown by a <font size = "5">'''thick'''</font> on the corresponding BNC connector in the Figure.
[[Bal_Select_Machine.png|framed|none]]<br>
 
Here, we are selecting a two planes rotor, with both planes between the bearings and 2 sensors.
 
Connect your transducers to the corresponding inputs on your 3-SERIES analyzer. The Balancing program will automatically associates the physical inputs of the frontend with the channels for the balancing according to the schem : '''In1''' is the ''input 1'' of the frontend, '''In2''' is the ''input 2'', '''In3''' the ''input 3'' and '''In4''' the ''input 4'''.


Connect your transducers to the corresponding In-puts on your 3-SERIES analyzer.


The Tach signal must be connected to Ext. sync. 1
The Tach signal must be connected to Ext. sync. 1
Line 262: Line 266:
Or use      '''<nowiki>[</nowiki>Alt<nowiki>]</nowiki> <nowiki>+</nowiki> <nowiki>[</nowiki>O<nowiki>]</nowiki>'''
Or use      '''<nowiki>[</nowiki>Alt<nowiki>]</nowiki> <nowiki>+</nowiki> <nowiki>[</nowiki>O<nowiki>]</nowiki>'''


[[Image:Balancing_19.png|framed|none]]
[[Bal_Select_Machine.png|framed|none]]


''Balancing Planes Setup – 2 Planes and 2 Sensors''
''Balancing Planes Setup – 2 Planes and 2 Sensors''
Retrieved from "https://wiki.oros.com/index.php?title=Special:MobileDiff/6009"

Navigation menu