Difference between revisions of "NVGate Installation and Connection"

Jump to navigation Jump to search

NVGate Installation and Connection (view source)

Revision as of 14:05, 27 May 2020

1,543 bytes removed ,  14:05, 27 May 2020
→‎NVGate update
Line 86: Line 86:


Click on "Finish".
Click on "Finish".
====NVGate update====
This tab is used for each installation of a new software version of NVGate.
1. Unzip key files sent by your OROS dealer and copy it to a local directory (e.g. C:\temp\OROSkeys)
2. Log to [http://www.myoros.com/ www.myoros.com] with your personal account and password
3. Go to the following address: [http://www.myoros.com/modules.php?name=Downloads&cid=87 http://www.myoros.com/modules.php?name=Downloads&cid=87]
4. Download the standard version, unzip the files
5. Click on setup.exe and follow the instructions
6. When you are asked for the key files: click on browse and locate your keys (e.g. C:\temp\OROSkeys) then click on OK
7. At the end of the installation, you must encrypt your dongle and instrument keys:
*  Connect your analyzer by Ethernet (switch on the analyzer) and plug our dongle
*  Launch NVGate Environment (automatically launched at the end of NVGate installation)
*  In the Update tab click on Encrypt dongle key
*  In the Update tab click on Encrypt hardware key
'''Note''': Don<nowiki>’</nowiki>t use it during a first installation; the system is pre-configured.
Caution: The dongle must be plugged.
The Instrument must be started and connected, but NVGate must not be running
Caution: In case of use of several analyzers, you can plug each analyzer and perform the "encrypt hardware key" operation one by one'''''. Only one instrument''''' should be plugged at a time.
The license keys and the instrument have been updated. Contact your local dealer in case of any trouble.
----


===Connecting the analyzer to your PC===
===Connecting the analyzer to your PC===
Retrieved from "https://wiki.oros.com/index.php?title=Special:MobileDiff/4977"

Navigation menu