Difference between revisions of "NVGate Post Analysis"

Jump to navigation Jump to search
Line 37: Line 37:
[[Image:MenuKeepRecSetup.png|framed|none]]<br>
[[Image:MenuKeepRecSetup.png|framed|none]]<br>


This will open the '''connection properties''' widow, and you can connect your tracks in the different module to perform your post analysis.
This will open the '''[[NVGate Player|Preview window]]''' (1), and all the plug-in used in real time during the analysis. Here, the [[NVGate FFT Analyzer|FFT]] window (2) and the [[NVGate Waterfall|waterfall]] (3). Finally the '''Connection window''' (4) is displayed, so you can and you can connect your tracks in the other module to perform your post analysis.
[[Image:NewConnecTracks.png|framed|none]]<br><br>
[[Image:KeepRecDisplay.png|framed|none]]<br><br>


* From the [[NVGate Project manager|project manager]], by right clicking on the signal you want to analyze. Choose '''Post-Analyze ''', and click on '''New''':
The opened plug-in are setup the same way as during the acquisition. So you can change these setup, as you would do for an [[NVGate Architecture|online]] real time analysis.
 
* From the [[NVGate Project manager|project manager]], by right clicking on the signal you want to analyze. Choose '''Post-Analyze ''', and click on '''Keep record setup''':
[[Image:ProjManagerKeepRecSetup.png|framed|none]]<br>
[[Image:ProjManagerKeepRecSetup.png|framed|none]]<br>


As previously, this will open the '''connection properties''' widow, and you can connect your tracks in the different module to perform your post analysis.
As from the ribbon, this will open the recorder and plug-in used for acquisition.  
[[Image:NewConnecTracks.png|framed|none]]<br><br>
[[Image:NewConnecTracks.png|framed|none]]<br><br>


Navigation menu