847
edits
Difference between revisions of "NVGate Torsional"
Jump to navigation
Jump to search
→Twist measurements (static and dynamic)
| Line 161: | Line 161: | ||
The twist can be: | The twist can be: | ||
* '''Static | * '''Static''': measure the transmitted torque and power. This is a not a dynamic result and is not to be analysed. | ||
* '''Dynamic | * '''Dynamic ''': measure the oscillating stress and resonances. This is a dynamic signal to be analyzed. | ||
[[Image:Release_note_25.png|framed|none]] | [[Image:Release_note_25.png|framed|none]] | ||
Both signals are | Both signals are calculated simultaneously by the virtual input module. | ||
When the torsional signals are | When the torsional signals are setup, simply connect it to the ''Virtual input ''plug-in | ||
To calculate the phase between the 2 sides of the twist it is necessary having a tachometer. | |||
This tachometer can come from any of the inputs or directly from one of the torsional signals using the ''Torsional <nowiki>+</nowiki> tach.'' mode. | This tachometer can come from any of the inputs or directly from one of the torsional signals using the ''Torsional <nowiki>+</nowiki> tach.'' mode. Missing tooth help to have a better accuracy. | ||
Then click on the ''Tools/Virtual inputs/dynamic'' button to open the virtual inputs setting. Click on the Twist tab. Select each torsional signal from the ''source 1'' and ''source 2'' lists. | Then click on the ''Tools/Virtual inputs/dynamic'' button to open the virtual inputs setting. Click on the Twist tab. Select each torsional signal from the ''source 1'' and ''source 2'' lists. | ||