Difference between revisions of "NVGate Ribbons: Acquisition Tab"

Jump to navigation Jump to search

NVGate Ribbons: Acquisition Tab (view source)

Revision as of 15:37, 18 May 2020

1,937 bytes removed ,  15:37, 18 May 2020
→‎Filters group
Line 92: Line 92:


[[Image:filter.png|framed|none]]
[[Image:filter.png|framed|none]]
The left button (''Apply to'') allows dispatching the filters to the different possible location in the signal process..
The left button (''Apply to'') allows dispatching the filters to the different possible location in the signal process.


The second button allows selecting a filter type and opens the corresponding setup.
The second button allows selecting a filter type and opens the corresponding setup.


 
[[NVGate_Filter_Builder|See filter page for more info.]]
[[Image:Reports_Tools_Ribbons_370.png|framed|none]]
''Apply to:'' '' This button opens the filter dispatching dialog:
 
[[Image:Reports_Tools_Ribbons_371.png|framed|none]]
 
Filters are available only for tachometers, outputs, aux. Outputs, edge detection, FFT, and Sync. Order and only after being activated using the <nowiki>’</nowiki>Inputs<nowiki>’</nowiki>, <nowiki>’</nowiki>Outputs signals<nowiki>’</nowiki>, <nowiki>’</nowiki>Tachometers<nowiki>’</nowiki> or <nowiki>’</nowiki>Event<nowiki>’</nowiki> connections previously described.
 
All filters are available, and by adding any filters to any channel, the properties of filters and channel selected are displayed and filters are applied in the current measurement:
 
[[Image:Reports_Tools_Ribbons_372.png|framed|none]]
 
''See Chapter 1 ASB - § Connection wizard for details''
 
* Filter properties:'' ''This button opens the corresponding filter properties dialog for setup.
 
The available filter types are:
 
*
[[Image:Reports_Tools_Ribbons_373.png|framed|none]]
High/Low pass:  Filter the high or low (depends on setup) frequencies of a signal
*
[[Image:Reports_Tools_Ribbons_374.png|framed|none]]
Pass/stop band:  Filter or reject (depends on setup) the specified bandwidth.
*
[[Image:Reports_Tools_Ribbons_375.png|framed|none]]
Integrator: Integrates or double integrates the signal. The high pass for avoiding divergences is included. Useful for acceleration to velocity/displacement conversion.
*
[[Image:Reports_Tools_Ribbons_376.png|framed|none]]
Differentiator: Derivate the signal. Useful for torsional velocity conversion in angular acceleration
''See Chapter 1 ASB - § Resources/Filter for details''
 
[[Image:Reports_Tools_Ribbons_18.png|framed|none]]
 
Warning: Due to bandwidth compatibility, the filters use is exclusive of the plug-in. I.e: Once a filter is associated to a location (ex: a plug-in channel) it can be used on the same plug-in channels only. The front-end is considered as a plug-in.
Retrieved from "https://wiki.oros.com/index.php?title=Special:MobileDiff/4526"

Navigation menu