8,877
edits
Difference between revisions of "NVGate Filter Builder"
Jump to navigation
Jump to search
→Filter builder
| Line 3: | Line 3: | ||
[[Image:Filter_builder_02.png|framed|none]] | [[Image:Filter_builder_02.png|framed|none]] | ||
====Connect filter===== | |||
Manage the filters definition and position. These filters operate on the time domain series. They can be applied in various locations onto the signal process (Inputs, Plug-in channels, Outputs, Player tracks) | |||
[[Image:filter.png|framed|none]] | |||
The left button (''Apply to'') allows dispatching the filters to the different possible location in the signal process.. | |||
The second button allows selecting a filter type and opens the corresponding setup. | |||
[[Image:Reports_Tools_Ribbons_370.png|framed|none]] | |||
''Apply to:'' '' This button opens the filter dispatching dialog: | |||
[[Image:Reports_Tools_Ribbons_371.png|framed|none]] | |||
Filters are available only for tachometers, outputs, aux. Outputs, edge detection, FFT, and Sync. Order and only after being activated using the <nowiki>’</nowiki>Inputs<nowiki>’</nowiki>, <nowiki>’</nowiki>Outputs signals<nowiki>’</nowiki>, <nowiki>’</nowiki>Tachometers<nowiki>’</nowiki> or <nowiki>’</nowiki>Event<nowiki>’</nowiki> connections previously described. | |||
All filters are available, and by adding any filters to any channel, the properties of filters and channel selected are displayed and filters are applied in the current measurement: | |||
[[Image:Reports_Tools_Ribbons_372.png|framed|none]] | |||
''See Chapter 1 ASB - § Connection wizard for details'' | |||
* Filter properties:'' ''This button opens the corresponding filter properties dialog for setup. | |||
The available filter types are: | |||
* | |||
[[Image:Reports_Tools_Ribbons_373.png|framed|none]] | |||
High/Low pass: Filter the high or low (depends on setup) frequencies of a signal | |||
* | |||
[[Image:Reports_Tools_Ribbons_374.png|framed|none]] | |||
Pass/stop band: Filter or reject (depends on setup) the specified bandwidth. | |||
* | |||
[[Image:Reports_Tools_Ribbons_375.png|framed|none]] | |||
Integrator: Integrates or double integrates the signal. The high pass for avoiding divergences is included. Useful for acceleration to velocity/displacement conversion. | |||
* | |||
[[Image:Reports_Tools_Ribbons_376.png|framed|none]] | |||
Differentiator: Derivate the signal. Useful for torsional velocity conversion in angular acceleration | |||
''See Chapter 1 ASB - § Resources/Filter for details'' | |||
[[Image:Reports_Tools_Ribbons_18.png|framed|none]] | |||
Warning: Due to bandwidth compatibility, the filters use is exclusive of the plug-in. I.e: Once a filter is associated to a location (ex: a plug-in channel) it can be used on the same plug-in channels only. The front-end is considered as a plug-in. | |||
=====High-Low pass===== | =====High-Low pass===== | ||