Difference between revisions of "NVGate Ribbons: Analysis Tab"

Jump to navigation Jump to search
Line 15: Line 15:
The monitor runs its analyses on a specific processor (DSP) allowing a totally independent computation for the regular analyses.
The monitor runs its analyses on a specific processor (DSP) allowing a totally independent computation for the regular analyses.


Note: Clicking on the bottom right icon (
Note: Clicking on the bottom right icon ([[Image:Reports_Tools_Ribbons_379.png]]) opens the monitor plug-in properties dialog allowing a full access to all the settings.
[[Image:Reports_Tools_Ribbons_379.png]]
) opens the monitor plug-in properties dialog allowing a full access to all the settings.


*
[[NVGate_Monitor_Plug_In|Read monitor page for more details.]]
[[Image:Reports_Tools_Ribbons_380.png|framed|none]]
Inputs:  Opens the channels sources selection. Allows choosing which input or track is monitored. Up to 4 ch at a time. The channel sources can be swapped at any time without influence on the other signal processing (analysis, record, play-back) of the instrument.
''See Chapter 1 ASB - § Monitor and waterfall/ Monitor for details''
 
*
[[Image:Reports_Tools_Ribbons_381.png|framed|none]]
Average decay: Setup the exponential spectrum  average decay of the FFT part.
*
[[Image:Reports_Tools_Ribbons_382.png|framed|none]]
Overall analysis: Opens the statistical extraction setting. This dialog set up the filter characteristics and the averaging of the extracted values (DC, RMS, Min/Max, Kurtosis)
*
[[Image:Reports_Tools_Ribbons_383.png|framed|none]]
Filter: Allows applying the filter (Tick on) or bypassing it (No Tick). The Bypass is immediate without delay.
''See Chapter 1 ASB - § Monitor and waterfall/ Monitor for details''


=====Time Domain Analysis group (Optional)=====
=====Time Domain Analysis group (Optional)=====

Navigation menu