8,877
edits
Difference between revisions of "NVGate Monitor Plug In"
Jump to navigation
Jump to search
no edit summary
| Line 1: | Line 1: | ||
The Monitor plug-in offers simple and powerful ways to monitor the measured signals. This 4 channels plug-in runs independently from the general analyzer status (running/Paused/stopped) with the capability of swapping connected channels at any time. | |||
[[Image:Reports_Tools_Ribbons_378.png|framed|none]] | |||
The second capability of the monitor is to extract statistical component of the signal in a specific bandwidth. Extracted levels can be used for triggering and waterfall references. | |||
The monitor runs its analyses on a specific processor (DSP) allowing a totally independent computation for the regular analyses. | |||
Note: Clicking on the bottom right icon ( | |||
[[Image:Reports_Tools_Ribbons_379.png]] | |||
) opens the monitor plug-in properties dialog allowing a full access to all the settings. | |||
* | |||
[[Image:Reports_Tools_Ribbons_380.png|framed|none]] | |||
Inputs: Opens the channels sources selection. Allows choosing which input or track is monitored. Up to 4 ch at a time. The channel sources can be swapped at any time without influence on the other signal processing (analysis, record, play-back) of the instrument. | |||
''See Chapter 1 ASB - § Monitor and waterfall/ Monitor for details'' | |||
* | |||
[[Image:Reports_Tools_Ribbons_381.png|framed|none]] | |||
Average decay: Setup the exponential spectrum average decay of the FFT part. | |||
* | |||
[[Image:Reports_Tools_Ribbons_382.png|framed|none]] | |||
Overall analysis: Opens the statistical extraction setting. This dialog set up the filter characteristics and the averaging of the extracted values (DC, RMS, Min/Max, Kurtosis) | |||
* | |||
[[Image:Reports_Tools_Ribbons_383.png|framed|none]] | |||
Filter: Allows applying the filter (Tick on) or bypassing it (No Tick). The Bypass is immediate without delay. | |||
''See Chapter 1 ASB - § Monitor and waterfall/ Monitor for details'' | |||
====Monitor==== | ====Monitor==== | ||
The Monitor input can be connected and hot swapped independently of any plug-in analysis. It is used to monitor one or several signals. | The Monitor input can be connected and hot swapped independently of any plug-in analysis. It is used to monitor one or several signals. | ||