Difference between revisions of "NVGate Analyzer Setting Browser (ASB)"

===ASB (Analyzer Setting Browser)===

[[File:ASB.png]]

The analyzer settings (front-end and analysis) are gathered in a tree called the Analyzer Setting Browser (ASB). The ASB window is shown/hidden from the ''Home'' tab / ''View'' group with the ''Workspace ''check box.

The ASB is designed to offer an exhaustive access to the analyzer settings. The standard access to the analyzer setup is offered in a more intuitive and simpler way with the general Vision interface (see Chapter 6)

'''Note: ''' A setting may be informative, i.e, it is not possible to modify it. In such case an I is displayed close to the icon:  

[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_26.png]]

'''Note''': settings may be hidden or visible depending on the current configuration.

'''Considerations for post-processing''' :  If the time signal is recorded on the PC or on the Mobi-Disk^™, it is highly recommended to be in office mode (hardware not connected) in order to avoid low performances and malfunctions.

*  

[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_03.png|framed|none]]

Availability of accept/reject in the bottom right:

======From the collection======

The second access level is available by right clicking on a collection (Inputs, Outputs, Channels, Tracks...) and '''Properties''' where all the settings contained in this collection can be adjusted.

[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_27.png|framed|none]]

It is also possible to copy and paste some items from a cell, a line, a column or a group of cell to another if they have compatible titles (Label, Transducer, Sensitivity…).

This feature uses the Windows® clipboard.

[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_28.png|framed|none]]

* Adjust it to the closest upper value if it is possible (ex: max range)

* Ignore and keep the current one if not acceptable (ex: unknown coupling)

======From the sub-module======

The third access level is available by right clicking on a sub-module (Input x, Output x, Track x, Channel x...) and '''Properties,''' where all the settings contained in this sub-module can be adjusted.

[[Image:REF-MAN_VOL1_Analyzer_Settings_Browser_wiki_partA_04.png|framed|none]]