Difference between revisions of "NVGate Event definition"

The available event types are below

[[Image:Reports_Tools_Ribbons_361.png]] Edge: Detect when the signal from an input or a recorded track cross a threshold.

This module is used with the analog inputs (tach pulse or hammer impact). This trigger can be applied to any plug-in analyzer including Waterfall and Recorder.

* '''Hystersis''': defines the hystersis around the threshold. The value can be adjusted between 0 and the full scale of the input signal (depending on the input range). If Slope is set to RISE, the input signal must go below Threshold - Hystersis before a new event can be detected. If Slope is set to FALL, the input signal must go above Threshold <nowiki>+</nowiki> Hystersis before a new event can be detected. This setting is used to reject false edge detection following, for example, an input signal transition.

[[Image:Reports_Tools_Ribbons_364.png]]RPM: Detect when a tachometer is below or above a specified angular speed. This module is associated with the Tachometer module. You need first to activate it on Tachometer plug in.  This trigger can be applied to any plug-in analyzer including Waterfall and Recorder.

[[Image:Event_definition_04.png|framed|none]]

[[Image:Reports_Tools_Ribbons_365.png]]Delta-RPM: Same as RPM but generates an event at each step. This module is associated with the Tachometer module, You need first to actibate it on Tachometer plug in.. It is used to trigger a plug-in by step. This trigger can be applied to any plug-in analyzer including Waterfall and Recorder.

[[Image:Event_definition_08.png|framed|none]]

[[Image:Reports_Tools_Ribbons_362.png]] Level: Detect when a signal is below or above a level

This module is used with DC inputs (optional) and/or associated with the TDA or Monitor module. This event can be applied to any plug-in analyzer including Waterfall and Recorder.

|}<br clear="all">

[[Image:Reports_Tools_Ribbons_363.png]] This module is used with DC inputs (optional) and/or associated with the Monitor module. It is used to trigger a plug-in by step. This trigger can be applied to any plug-in analyzer including Waterfall and Recorder.

|}<br clear="all">

[[Image:Reports_Tools_Ribbons_366.png]]Periodic: Used to trigger a plug-in by periodic step. This event can be applied to any plug-in analyzer including Waterfall and Recorder.

* '''Label''': the name of the event (by default Periodic n, with 1 <nowiki><</nowiki>= n <nowiki><</nowiki>= 2).

* '''Period''': defines the event generation period. An event is generated every Period second (the first one is generated 1 period after the run). The user can enter a value between 2 ms and 1000000 s.

[[Image:Reports_Tools_Ribbons_367.png]]Combined: Generates an event which is the result of a combination of 2 events. Possible combinations are: OR, AND and AFTER.

* '''Event B''': defines the second operand of the combined event. The user can choose any defined event as operand except for a combined event.

[[Image:Reports_Tools_Ribbons_368.png]] User: Generates an event when the operator presses the corresponding event button in the software/remote controller interface.

Four user events are available. These events are compatible with the macros. They are particularly useful to run several plug-ins at different time in the same analysis. It can also be put in the control pannel or control by NVDrive.

* '''Trigger''': The user event<nowiki>’</nowiki>s triggering.

[[Image:Reports_Tools_Ribbons_369.png]]''External synch:'' ''Properties of the Ext synch trigger inputs.