Difference between revisions of "NVGate Torsional"

NVGate Torsional (view source)

658 bytes removed , 07:52, 9 May 2020

9,121

edits

@@ Line 53: / Line 53: @@
-|}<br clear="all">
 * '''Mode: '''This setting allows selecting available signal generated by the Ext. synch input to be used by the NVGate analysis components.
@@ Line 94: / Line 94: @@
 |Sampling <nowiki>+</nowiki> tach <nowiki>+</nowiki> tors
 |Combine the sampling, the Tachometer and the Torsional modes. Angular re-sampling, Tachometer speed  and instantaneous velocity are provided by the input
 |}
-* '''Hold off (% period): '''defines the minimum time (expressed in % of the last valid tach period) between 2 tach pulses used to measure RPM.
-If a pulse is detected before this time has expired since the last valid pulse then the new pulse is rejected. This is used to reject angular speed variations that are too large. This minimum time is in fact the maximum between the Hold off setting value and the value computed using the last tach period length and the Hold off (% period) setting value.
-''Hidden/fixed: ''Hidden if Mode is Trigger or Torsional.
-[[Image:front_end_18.png|framed|none]]
-[[Image:front_end_19.png|framed|none]]
 * '''Pulse / rev''': the number of pulses per revolution. The user can enter an integer value between 1 and 4092. For a non-integer number of pulses per revolution the user must use a virtual tach.