8,877
edits
Difference between revisions of "NVGate Ribbons: Measurement Tab"
Jump to navigation
Jump to search
→Control group
| Line 21: | Line 21: | ||
Note: the trigger/start status of the plug-ins may block their process, waiting for an event. | Note: the trigger/start status of the plug-ins may block their process, waiting for an event. | ||
Warning: Pressing the run button during an analysis lead to reset all current analyses, restarting all averages from 0. The analyzed data will be lost. | Warning: Pressing the run button during an analysis lead to reset all current analyses, restarting all averages from 0. The analyzed data will be lost. | ||
* | * [[Image:Reports_Tools_Ribbons_272.png]]Pause: (Pause): Suspend or un-suspend the current analysis. | ||
[[Image:Reports_Tools_Ribbons_272.png | |||
Pause: (Pause): Suspend or un-suspend the current analysis. | |||
Note: If the recorder is running, its starts / finishes a record. | Note: If the recorder is running, its starts / finishes a record. | ||
* | * [[Image:Reports_Tools_Ribbons_273.png]] Stop: (CTRL<nowiki>+</nowiki>S) Stops all the current analyses and recording. | ||
[[Image:Reports_Tools_Ribbons_273.png | |||
Stop: (CTRL<nowiki>+</nowiki>S) Stops all the current analyses and recording. | |||
After requesting a stop, the plug-ins finished their current block. When all the plug-ins has switched to'' Stopped'' the analyzer switch to the Stopped status | After requesting a stop, the plug-ins finished their current block. When all the plug-ins has switched to'' Stopped'' the analyzer switch to the Stopped status | ||
| Line 42: | Line 36: | ||
Note that another Run/Pause/Stop button is always available in the status bar (bottom left) | Note that another Run/Pause/Stop button is always available in the status bar (bottom left) | ||
* | * [[Image:Reports_Tools_Ribbons_274.png]]Arm: (CTRL<nowiki>+</nowiki>SHIFT<nowiki>+</nowiki>R) Arm the recorder. Prepare the recorder to start immediately on the run. Arming process can lap a few seconds. | ||
[[Image:Reports_Tools_Ribbons_274.png | |||
Arm: (CTRL<nowiki>+</nowiki>SHIFT<nowiki>+</nowiki>R) Arm the recorder. Prepare the recorder to start immediately on the run. Arming process can lap a few seconds. | |||
Note: modifying a setting of the analyzer will disable the arming. It is then necessary to re-arm it. | Note: modifying a setting of the analyzer will disable the arming. It is then necessary to re-arm it. | ||
| Line 50: | Line 42: | ||
If the recorder is not armed, it will take a few second to achieve the arming prior to effectively start recording the data. | If the recorder is not armed, it will take a few second to achieve the arming prior to effectively start recording the data. | ||
* Note: the | * Note: the recorer can be armed from the ASB: (Recorder /Trigger/ Recorder). | ||
* | * [[Image:Reports_Tools_Ribbons_275.png]]Manual trigger: (CTRL<nowiki>+</nowiki>T) generate a manual trigger event. This event is available for the event list and can be associated to the plug-in triggers (start/stop or trigger). See acquisition tab description. | ||
[[Image:Reports_Tools_Ribbons_275.png | |||
Manual trigger: (CTRL<nowiki>+</nowiki>T) generate a manual trigger event. This event is available for the event list and can be associated to the plug-in triggers (start/stop or trigger). See acquisition tab description. | |||
Warning: While the manual trigger is not associated to a plug-in, it has no effect. | Warning: While the manual trigger is not associated to a plug-in, it has no effect. | ||
* | * [[Image:Reports_Tools_Ribbons_276.png]] Record status: Controls the recorder location and activity. | ||
[[Image:Reports_Tools_Ribbons_276.png | |||
Record status: Controls the recorder location and activity. | |||
* If the setting is set to Off, the icon is grayed | * If the setting is set to Off, the icon is grayed | ||
[[Image:Reports_Tools_Ribbons_277.png|framed|none]] | [[Image:Reports_Tools_Ribbons_277.png|framed|none]] | ||