Difference between revisions of "NVGate X-Pod: Temperature probe conditioner"

NVGate X-Pod: Temperature probe conditioner (view source)

28 bytes removed , 12:47, 8 May 2020

9,040

edits

@@ Line 18: / Line 18: @@
 One XPod type selector is available for each XPod position.
-[[File:xpod bridge.png|framed|none]]
-* '''Bridge max current''': Select the max excitation current for the corresponding active Bridge Xpod. Each bridge Xpod excitation current can be limited to 30 mA up to 4 V and 12 mA up to 10 V.
-* '''Bridge voltage''': Select the excitation voltage for the corresponding active Bridge Xpod. From 0 to 10 V.
-[[File:Xpod_temp.png|Xpod_temp.png]]
+* '''Cold Compensation''':''' '''Enable or disable the internal cold junction compensation for the corresponding active Temperature Xpod. This setting enables the compensation of the connectors metal junction thermocouple voltage at the Xpod side. It uses the Xpod internal temperature measurement (2 locations/Xpod) to correct the measured temperatures.
 ===Temperature===