9,040
edits
Difference between revisions of "NVGate Front End"
Jump to navigation
Jump to search
→Expander modules
| Line 311: | Line 311: | ||
One XPod type selector is available for each XPod position. This setting will include each new Xpod type according to their availability on the OROS catalog. | One XPod type selector is available for each XPod position. This setting will include each new Xpod type according to their availability on the OROS catalog. | ||
======X-Pod Strain gage====== | |||
[[Image:front_end_07.png|framed|none]] | [[Image:front_end_07.png|framed|none]] | ||
| Line 319: | Line 320: | ||
The XPod Bridge conditioner extension module is for strain gauges, dynamic pressure, force and acceleration measurements. | The XPod Bridge conditioner extension module is for strain gauges, dynamic pressure, force and acceleration measurements. | ||
Temperature probe conditioner | Type: bridge signal conditioning for strain gauges, dynamic pressure, force and acceleration measurements. | ||
Gauge type: Full, Half or Quarter bridge mount. The completion resistors are included in the Xpod, | |||
Resistance: Bridge completion resistor: 120 or 350 Ohms for quarter bridge mount. | |||
Gain: Bridge gain: 10 or 100 depending on the required precision and range. | |||
Max current: the provided current can be limited to 30 mA up to 4 V and 12 mA up to 10 V. | |||
Excitation voltage: Each Xpod provides an excitation voltage from 0 to 10 V. | |||
Offset Comp.: Bridge offset comp: Can be used for manual balance of the bridge, | |||
New Transducer Type: This button is available when a transducer type is selected. A new transducer type is necessary when the pre-defined type does not fit the needs. It is used to gather transducers with the same magnitud | |||
======Temperature probe conditioner====== | |||
This Xpod handles thermocouples and RTD transducers. | This Xpod handles thermocouples and RTD transducers. | ||