9,040
edits
Difference between revisions of "NVGate Output Signals"
Jump to navigation
Jump to search
no edit summary
| Line 11: | Line 11: | ||
[[File:out3.png]] | [[File:out3.png]] | ||
===Output settings === | |||
[[Image:Reports_Tools_Ribbons_351.png]] Outputs settings: Manages the generated signal settling, (Mute, transition time) | [[Image:Reports_Tools_Ribbons_351.png]] Outputs settings: Manages the generated signal settling, (Mute, transition time) | ||
* '''Label''': the name of this Output (by default Output n, with 1 <nowiki><</nowiki>= n <nowiki><</nowiki>= 2). The label of each output is used in the result name and in all connection tools. | |||
* '''Source''': the input signal of the output (NONE by default). The input signal can be any dynamic input of the Front-end (in the On-line mode) or any signal generated by the output signals resource (in the On-line mode) or any track of the Player (recorded from inputs). | |||
* '''Applied ''''''filter''': the filter applied to this output. The list of filters applicable to the outputs is defined in the Filter module, by choosing Apply to= All. | |||
* '''Clipping''': the amplitude limitation of the output signal (from 1 mV to 10 V). | |||
* '''Gain''': This setting can be displayed in dB. It is the gain applied to the output signal. | |||
* '''Impedance''': | |||
{|border="2" cellspacing="0" cellpadding="4" width="77%" align="center" | |||
|'''Impedance''' | |||
|'''Description''' | |||
|- | |||
|GND | |||
|The output is connected to the ground. | |||
|- | |||
|50 Ohms | |||
|The output impedance is equal to 50 Ohms. | |||
|- | |||
|600 Ohms<ref>Only available for OR38 & OR36. For phone lines connections use.</ref> | |||
|The output impedance is equal to 600 Ohms. | |||
|}<br clear="all"> | |||
* '''Synchronization''': | |||
{|border="2" cellspacing="0" cellpadding="4" width="92%" align="center" | |||
|'''Synchronization''' | |||
|'''Description''' | |||
|- | |||
|Free run | |||
|The output delivers a signal as soon as there is a source connected. | |||
|- | |||
|Linked to run | |||
|The output is activated only after the first run action. | |||
|}<br clear="all"> | |||
* '''Transition control''': On / Off. If the value of this setting is "On" the ''Output settings/transition time'' is applied when this output is activated or disabled. | |||
=====Sine===== | =====Sine===== | ||