Difference between revisions of "NVGate Player"

Jump to navigation Jump to search

NVGate Player (view source)

Revision as of 10:53, 28 April 2020

1,766 bytes removed ,  10:53, 28 April 2020
→‎Seamless transition from recording to post analysis
Line 177: Line 177:
* '''Signal bandwidth:''' the equivalent signal frequency bandwidth and the corresponding sampling frequency (for example: 20 kHz (51.2 kS/s).
* '''Signal bandwidth:''' the equivalent signal frequency bandwidth and the corresponding sampling frequency (for example: 20 kHz (51.2 kS/s).
The player tracks can be connected to a plug-in analyzer in the Post-analysis mode or to the Front-end output in ''Connected'' mode on line. ''Fixed''
The player tracks can be connected to a plug-in analyzer in the Post-analysis mode or to the Front-end output in ''Connected'' mode on line. ''Fixed''
====Seamless transition from recording to post analysis====
After recording a signal and computing some results with the NVGate plug-ins (FFT, SOA, OCT) you may need to post-analyze the recorded signal to change a few analysis settings or compute additional results using the same plug-ins.
With NVGate 12.10, it is now possible to''' '''post-analyze a signal:
* '''Directly using the same setup as the one used during the recording. '''If required, modifications to the setup can be completed in an additional step.
''In that case, after loading the record setup the same results will be computed and / or displayed as during the acquisition. It is then possible to change the analysis settings, add or remove results and modify the layouts.''
<u>''Note:</u> ''''if the record setup contains virtual inputs, torsional channels, CAN or DC channels, the connection of these channels to the plug-ins will be reset.''
* or start from scratch '''on a new default setup'''.
''In that case, all the tracks connection to the plug-ins will be reset.''
<font color="#70AD47">How to proceed?</font>
To post-analyze a signal and choose to keep the record setup or use a new setup, you can either:
* Select the signal from the Post Analysis menu and select the Post-analyze option as follows:
<font color="#FFFFFF">
[[Image:release_note_NVGate_V12_10_14.png|framed|none]]
</font>
''Selecting a signal to be post analyzed from the Select Signal window''
<font color="#FFFFFF"><font size = "1">Select</font></font>
----
* Or right click on the signal in the NVGate Workspace and select the Post-analyze option:
<font color="#44546A">
[[Image:release_note_NVGate_V12_10_15.gif|framed|none]]
</font>
''Selecting a signal to be post analyzed from the project manager''
Retrieved from "https://wiki.oros.com/index.php?title=Special:MobileDiff/2916"

Navigation menu