9,040
edits
Difference between revisions of "NVGate Time Domain Analysis"
Jump to navigation
Jump to search
NVGate Time Domain Analysis (view source)
Revision as of 08:29, 28 April 2020
, 08:29, 28 April 2020→Analysis
| Line 180: | Line 180: | ||
=====Analysis===== | =====Analysis===== | ||
*'''Autobandwidth''': manages the analysis and recording bandwidths automatically. The Inputs selection window allows the use of 2 different sampling rates for the dynamic inputs. It gathers inputs with the same physical quantity into groups, maintaining the same sampling into each group. When inputs are associated with the analysis plug-in, it adjusts its analysis bandwidth to match the inputs ones. Mixing input bandwidths in one analysis plug-in lead to set its bandwidth to the lowest one. Autobandwidth is set by default . When it is enabled in the plug-in, these settings "switch to informative status" | |||
* '''Range: '''the TDA plug-in frequency range. The analyzer sampling frequency divided by 2.56 limits this range, and the minimum is obtained by dividing this limit by 50000. For example, if the analyzer sampling frequency is 51,2kS/s, then the max range is 20 kHz and the min is 400mHz. In post analysis mode, the Max Bandwidth setting from the Player plug-in provides the analyzer sampling frequency by multiplying the value by 2.56 (ex: if max bandwidth = 20 kHz then the analyzer sampling frequency is 51.2kS/s), otherwise, the analyzer sampling frequency is provided by the input sampling setting from the Front end plug-in input setting sub-module. | * '''Range: '''the TDA plug-in frequency range. The analyzer sampling frequency divided by 2.56 limits this range, and the minimum is obtained by dividing this limit by 50000. For example, if the analyzer sampling frequency is 51,2kS/s, then the max range is 20 kHz and the min is 400mHz. In post analysis mode, the Max Bandwidth setting from the Player plug-in provides the analyzer sampling frequency by multiplying the value by 2.56 (ex: if max bandwidth = 20 kHz then the analyzer sampling frequency is 51.2kS/s), otherwise, the analyzer sampling frequency is provided by the input sampling setting from the Front end plug-in input setting sub-module. | ||
=====Average===== | =====Average===== | ||
* '''Duration''': The duration of the signal used to compute the scalar results available as result. Results are delivered each 256 samples. | * '''Duration''': The duration of the signal used to compute the scalar results available as result. Results are delivered each 256 samples. | ||