Difference between revisions of "NVGate Ribbons: Home Tab"

Jump to navigation Jump to search

NVGate Ribbons: Home Tab (view source)

Revision as of 09:45, 21 April 2020

1,928 bytes removed ,  09:45, 21 April 2020
→‎Make a measurement
Line 70: Line 70:
[[Image:V10_release_22.png|framed|none]]
[[Image:V10_release_22.png|framed|none]]


====Make a measurement====
When the project is opened and the setup ready, measurement take place when data are ready the Measurement is saved.
At this step most of the properties and comments are already fulfilled, only the measurement ones without suggestion have to be informed.
The process can continue with other measurements:
* Same type or different ones loaded from a model/measurement
* On the same NVGate or on another ones with the same shared Project and Models
[[Image:Reports_Tools_Ribbons_223.png|framed|none]]
Edit Measurement: Load/Unload an existing measurement (i.e. a set of acquired/analyzed data with the measurement setup). The loaded measurement can be modified and saved.
Editing a measurement allow modifying the results presentation (layouts, markers, masks, operators) and saving it in the measurement itself. The modified measurement can then be used for further reporting or for consultation.
The Edit Measurement button indicates the software active layer:
[[Image:Reports_Tools_Ribbons_224.png|framed|none]]
(Enabled)  indicate a measurement is being edited: the layout and windows show the measured data and the ASV (Analyzer Setting Viewer) shows actual setting values at measurement time.
[[Image:Reports_Tools_Ribbons_225.png|framed|none]]
(Disabled)  indicates that no measurement is edited. The current layout and windows show acquisition and/or analysis data.
[[Image:Reports_Tools_Ribbons_226.png|framed|none]]
Load Setup: Load an existing analyzer setup (a workbook or a model)
The available setups may come from the Models or even from existing project workbook. The models are not subject to unexpected modifications (as saving a project with modified settings).
The use of Models is recommended rather than the project ones.
*
[[Image:Reports_Tools_Ribbons_227.png|framed|none]]
Reset Workbook:  Reset entirely the acquisition and analysis setting to their default value.


=====View group=====
=====View group=====
Retrieved from "https://wiki.oros.com/index.php?title=Special:MobileDiff/2363"

Navigation menu