Difference between revisions of "OR3X Hardware Instruments"

OR3X Hardware Instruments (view source)

1,143 bytes removed , 15:49, 3 March 2023

9,121

edits

@@ Line 27: / Line 27: @@
 [[Image:O4_back_.png|400px|none]]
-====DC power supply====
-The DC power must fulfill the following conditions:
-{|border="2" cellspacing="0" cellpadding="4" width="79%"
+====O4 Powering on====
-|Voltage
+A beep is produced when the instrument is connected on PC'''.'''
-|OR34 Power
-|
-[[Image:Usersmanual_53.gif|framed|none]]
-Overload action
-|-
-|DC, 10 V to 28 V
-|<nowiki>></nowiki>15 VA
-|<nowiki>+</nowiki> and – poles are short circuited if Vpeak <nowiki>></nowiki> 31 V
-|}
-OR34 instrument is DC power supplied using the following plug:
-[[Image:Usersmanual_54.png|framed|none]]
-All the connections of OR34 instruments comply with SELV (Safety Extra Low Voltage) conditions.
-====OR34 Powering on====
-A beep is produced when the instrument is connected to the mains'''.'''
-'''Power on OR34 Instrument''' by pressing the On/Off button of the back panel and wait until a beep is produced (2 sec) then release the button. The LED is fast flashing green (system is loading) and then slow flashing green (system OK).
-'''Power off OR34 Instrument''' by pressing the On/Off button of the back panel (The LED is flashing red) Then wait until a beep is produced (2 sec) to release the button.
-'''If OR34 Instrument does not respond''', unplug the main power supply and press the reset button [[Image:Usersmanual_55.png]] (use a paperclip) of the back panel.
 ===OR35/OR36/ORMP/OR38 Teamwork instruments===