Repair record

This is development tools wich allow you to recover a corrupt signal.

• First do a copy of the signal that you want to recover . Put it in another directory than NVGate project base. (This is really important using the tools can delete all the signal on a folder !)

• Download the last version below

repairrecord.exe from november 2020 https://orossas.sharepoint.com/:u:/g/support/EdsReNB8aAxLscQ_7gNFWFgBHSVbqDhKrTq2PIvIvgaeCg?e=MR3wEE

• Extract the file
• Launch a "dos prompt" .
• Put the command line with the .exe then the folder of the NVGate project that you want to recover .

Exemple : C:\RepairRecord\RepairRecord.exe "C:\Nouveau\section" (See dos picture below)

• The software is scanning all the signal in the folder and try to recover it, if he can’t recover the signal, the signal can be delete….
• Now you can import the signal in NVGate.
• I recommend to re-record the signal with NVGate, (from player to recorder) then I recommend to be careful about the end of the signal. (By re-recording the signal, you can delete the end.)