Repair record

This is development tools. Ask OROS before using it.

• First do a copy of the signal that you want to recover . Put it in another directory, than the project base of NVGate. (this is important using the tools can delete all the signal on a folder…)

• Extract the file attached with this mail, rename the .txt by a .exe • Launch dos prompt. • Put the command line with the .exe then the folder of the NVGate project that you want to recover . Exemple : C:\RepairRecord\RepairRecord.exe "C:\Nouveau\section" (See dos picture attached)

• The software is scanning all the signal in the folder and try to recover it, if he can’t recover the signal, the signal can be delete…. • Now you can import the signal in NVGate. • I recommend to re-record the signal with NVGate, (from player to recorder) then I recommend to be careful about the end of the signal, on the signal that you have send to me the end has not been recover properly. By re-recording the signal, you can delete the end.