Repair record

This is development tools wich allow you to recover a corrupt signal.

• First do a copy of the signal that you want to recover . Put it in another directory than NVGate project base. (Warning : This is really important using this tool can delete all the signal on a folder !)

• Download repairrecord.exe the last version below:

repairrecord.exe from may 2024 https://orossas.sharepoint.com/:u:/g/support/Ef-ZqaJ4fuRDlMeGXYnY-6cB-ITCt9Kp9_sF8aUIm1Qy_w?e=SLzPYk

• Extract all the file and put it next to NVGate.exe (by default : C:\OROS\Programs\NVGate)
• Launch a "dos prompt" .
• Put the command line after RepairRecord.exe then the folder of the NVGate project that you want to recover .

Exemple : C:\OROS\Programs\NVGate\repairrecord.exe "C:\Nouveau\section" (See dos picture below)

• The software is scanning all the signal in the folder and try to recover it, if he can’t recover the signal, the signal can be delete….
• Now you can import the signal in NVGate.
• I recommend to re-record the signal with NVGate, (from player to recorder) then I recommend to be careful about the end of the signal. (By re-recording the signal, you can delete the end.)