Difference between revisions of "NVGate Ribbons: Home Tab"

Jump to navigation Jump to search

NVGate Ribbons: Home Tab (view source)

Revision as of 09:43, 12 January 2022

2,669 bytes removed ,  09:43, 12 January 2022
→‎Setup Group
Line 308: Line 308:
=old to delete !!=
=old to delete !!=


====Setup Group====
In both above ''open project'' cases, the project is opened, no setup is loaded. The Setup is loaded further this first action. There are few ways to load a setup prior being ready for acquisition and analyses.
<u>Check the ''Load setup'' box</u> in the ''open project'' dialog in order to select the setup while exiting the ''Open project'' one.
<u>Use the ''Home/Setup/Load'' </u>ribbon button.
The load setup dialog behaves as a single Item selection. It allows loading setups from ''Models'' ''Measurements'' and ''Projects'' or creating setups for on-line or post-analysis:
[[Image:V10_release_18.png|framed|none]]
While in Model or Measurement load, the details section (right bottom side) shows which results are saved by the selected setup.
<u>Load a Model: </u>Loaded ''Models'' offer additional features;
* Model properties will inherit to the measurements
* Loaded Model name reminded in the Ribbon; ''Home/Setup'' with the [[Image:V10_release_19.png]]icon. This Model will remain active until a reset setup[[Image:V10_release_20.png]] is applied or another setup is loaded.
* When the measurement are shared out of NVGate or collated to NVGate the associated model will be transferred with the measurement.
* Loaded Model can be modified to adjust to current situation. The modified setup is saved in the Measurement, but the original Model remains unmodified. This allows providing predefined setups which are not modified by specific usage (adjustments, operator<nowiki>'</nowiki>s error, etc.) ensuring reproducibility.
* You can modify and save the setup with the ''Home/Setup/save as model'' button [[Image:V10_release_21.png]]. Associated model properties will be proposed in the ''save as model'' dialog. This allows updating an existing Model keeping its properties.
<u>Load a Measurement<nowiki>'</nowiki>s setup: </u>The setup used to generate the results of the selected ''Measurement'' will be reloaded.
This feature allows reproducing faithfully exiting measurements for prototyping fine tuning or trend analyses. OROS recommend saving all repeated measurements in the same project.
<u>Create a setup</u> from scratch: This sis available for on-line or post-analysis. Both options will reset the current setup to default values before building the new setup.
* On-line opens the Channel selection dialog as usual.
* ''Post-analysis'' will first require selecting a file to be analyzed with the Select signal dialog. Similarly to select model one the right side of the dialog shows the Measurement properties. This information allows rapidly finding the searched signal.
[[Image:V10_release_22.png|framed|none]]


====Pre-defined setups====
====Pre-defined setups====
Retrieved from "https://wiki.oros.com/index.php?title=Special:MobileDiff/9902"

Navigation menu