Difference between revisions of "NVGate Ribbons: Analysis Tab"

NVGate Ribbons: Analysis Tab (view source)

42 bytes removed , 09:44, 16 July 2020

9,121

edits

@@ Line 36: / Line 36: @@
 Note: Up to 4 FFT plug-in can be present in the software configuration, each of them running independent analyses on the same or different channels.
-*
+* [[Image:Reports_Tools_Ribbons_393.png]]Range: Setup the analysis range for the plug-in. This value is maximized by the front-end sampling frequency divided by 2.56.<br>Note: Each plug-in feature an independent bandwidth.
-[[Image:Reports_Tools_Ribbons_393.png|framed|none]]
+* [[Image:Reports_Tools_Ribbons_394.png]]Lines: Select the analysis resolution in number of frequency lines. The ''resolution = Range / (Lines-1) '' in Hz
-Range: Setup the analysis range for the plug-in. This value is maximized by the front-end sampling frequency divided by 2.56.<br>Note: Each plug-in feature an independent bandwidth.
+* [[Image:Reports_Tools_Ribbons_395.png]]Average: Select the domain of averaging:
-*
-[[Image:Reports_Tools_Ribbons_394.png|framed|none]]
-Lines: Select the analysis resolution in number of frequency lines. The ''resolution = Range / (Lines-1) '' in Hz
-*
-[[Image:Reports_Tools_Ribbons_395.png|framed|none]]
-Average: Select the domain of averaging:
 * <u>''Spectral''</u>: the spectra module are averaged together
 * <u>''Time''</u>: the trigger block are averaged together -<nowiki>></nowiki> provide absolute / relative phase