Difference between revisions of "Balancing single/dual plane"

Balancing single/dual plane (view source)

3 bytes added , 14:28, 26 June 2020

847

edits

@@ Line 700: / Line 700: @@
 <u>Execution:</u>
-* Click "balancing run" (bottom left)
+* Click "Online balancing" (bottom left)
 *  Click "Start" start or F2.  Measurement is displayed.
 * Click  "Average", when rotor is at stable speed .(Stationary state)
@@ Line 719: / Line 719: @@
 (These points only appear if they are marked "active" in the result window)
-Save the balancing result.
+To save the balancing result, go back in the standard window by clicking on '''"Standard"''' and save as usual.
-At any stage saved results can be reloaded using the "Load Measurement" buttons.
+[[Bal_2_onlineBal.png|framed|none]]
-[[Image:Balancing_56.png|framed|none]]
 ''Balancing run''