847
edits
Difference between revisions of "Balancing single/dual plane"
Jump to navigation
Jump to search
→Measurements, display, storage
| Line 527: | Line 527: | ||
===Measurements, display, storage=== | ===Measurements, display, storage=== | ||
After setting up the acquisition channel and the machine type, you may setup the test run in the "Rotor" window. For two plane balancing, you will need to perform two test run, and set a mass on each plane. By example, here, we are putting a 5g mass on the first plane for the test run1 and 5g mass on the second plane for the test run2 : | After setting up the acquisition channel and the machine type, you may setup the test run in the "Rotor" window. For two plane balancing, you will need to perform two test run, and set a mass on each plane. By example, here, we are putting a 5g mass at pos. 3 on the first plane for the test run1 and 5g mass at pos. 8 on the second plane for the test run2. We are not putting mass on the second plane for test run1 and no mass on the first plane for test run2 : | ||
[[Image:Bal_2_TestPrep_real.png|framed|none]]<br> | [[Image:Bal_2_TestPrep_real.png|framed|none]]<br> | ||