847
edits
Difference between revisions of "Balancing single/dual plane"
Jump to navigation
Jump to search
→Balancing prognosis
| Line 473: | Line 473: | ||
|} | |} | ||
====Balancing Run==== | |||
Once you have mounted the test mass as indicated by the software, you can perform a Balancing run, to ensure the rotor is now properly balanced. | |||
To do so, Go back in the measurement window and press start. | |||
*'''(1)''' Click on average | |||
*'''(2)''' Select "Balancing Run1" | |||
*'''(3)''' Save the measurement | |||
These points only appear if they are marked "active" in the result window. Then, save the balancing result. At any stage saved results can be reloaded using the "Load Measurement" buttons. They also can be overwritten. | These points only appear if they are marked "active" in the result window. Then, save the balancing result. At any stage saved results can be reloaded using the "Load Measurement" buttons. They also can be overwritten. | ||