Difference between revisions of "Balancing single/dual plane"

Balancing single/dual plane (view source)

1,006 bytes removed , 13:44, 24 June 2020

847

edits

@@ Line 318: / Line 318: @@
 ''Rotor geometry and balancing quality''
 You can export and reload a configuration with the "Export" and "Load" buttons.
-====Measurement monitor settings====
-{|border="2" cellspacing="0" cellpadding="4" width="100%"
-|align = "center"|
-[[Image:Balancing_24.png|framed|none]]
-<br>''Display settings - Diagram 1 - Plane 1''
-|align = "center"|
-[[Image:Balancing_25.png|framed|none]]
-<br>''Display settings - Diagram 2 - Plane 2''
-|}
-'''Notice: The balancing module''' always starts with the monitor that has been used last.
-All Settings can be modified:
-* Set the number of graphs, the type and the order in which you want to see them.
-Graphs with frames can be treated like windows in Windows®.
-* Chose the scaling of the axis or use auto scaling (Y-axis only).
-* Colors and graph names can be arranged.
-* <u>Click "Set" to create your new monitor.</u>
-* Use "Save" at the bottom to save your new monitor.
-If you want to use several monitors with different layouts put existing monitors into the monitor table (double click a field in the table).
-You can save and reload this selection of layouts.
-Continue with "Close"
 ==One plane balancing==