maintenancecenter, writer
115
edits
Difference between revisions of "NVGate Integrate - Differentiate - Unit"
Jump to navigation
Jump to search
m
NVGate Integrate - Differentiate - Unit (view source)
Revision as of 17:46, 5 June 2020
, 17:46, 5 June 2020English edits
(Created page with "=====Integrate/Differentiate===== These commands are available only for results with an X-Axis that represents frequency lines. The operations are performed in the spectral do...") |
m (English edits) |
||
| Line 3: | Line 3: | ||
* '''Normal: '''No operation is performed on the data | * '''Normal: '''No operation is performed on the data | ||
* '''dt: '''The result is integrated, so that acceleration becomes velocity. The formula used is: | * '''dt: '''The result is integrated, so that acceleration becomes velocity. The following formula used is: | ||
[[Image:Display_Graphs_Traces_40.png|framed|none]] | [[Image:Display_Graphs_Traces_40.png|framed|none]] | ||
* '''dt²: '''The result is integrated twice, so that acceleration becomes displacement. The formula used is: | * '''dt²: '''The result is integrated twice, so that acceleration becomes displacement. The following formula used is: | ||
[[Image:Display_Graphs_Traces_41.png|framed|none]] | [[Image:Display_Graphs_Traces_41.png|framed|none]] | ||
* '''dx/dt: '''The result is derived, so that velocity becomes acceleration. The formula used is: | * '''dx/dt: '''The result is derived, so that velocity becomes acceleration. The following formula used is: | ||
[[Image:Annotation 2020-04-18 163216.png|framed|none]] | [[Image:Annotation 2020-04-18 163216.png|framed|none]] | ||
* '''dx/dt²: '''The result is derived twice, so that displacement becomes acceleration. The formula used is: | * '''dx/dt²: '''The result is derived twice, so that displacement becomes acceleration. The following formula used is: | ||
[[Image:Annotation 2020-04-18 163216_2.png|framed|none]] | [[Image:Annotation 2020-04-18 163216_2.png|framed|none]] | ||
=====Unit===== | =====Unit===== | ||
These commands are available only for results with an X-Axis that represents frequencies. The operations are performed in the spectral domain | These commands are available only for results with an X-Axis that represents frequencies. The operations are performed in the spectral domain. | ||
* '''RMS: '''Provides the RMS (EU) value. This is the default unit. | * '''RMS: '''Provides the RMS (EU) value. This is the default unit. | ||