Difference between revisions of "NVGate Overall Acoustic - Sound Level meter"

NVGate Overall Acoustic - Sound Level meter (view source)

1 byte added , 20:14, 2 June 2020

m

writer

240

edits

Revision as of 20:14, 2 June 2020 (view source) NHoffman (talk \| contribs) m (→‎Count) ← Older edit		Revision as of 20:14, 2 June 2020 (view source) NHoffman (talk \| contribs) m (→‎Time to stabilization) Newer edit →
Line 349:		Line 349:
	Until this time to stabilization is over, results are not available. All filters have a stabilization time and at any change of settings, filters need this time before the results are available. The lower the frequency is the longer this stabilization is.		Until this time to stabilization is over, results are not available. All filters have a stabilization time and at any change of settings, filters need this time before the results are available. The lower the frequency is the longer this stabilization is.

	If there were no change between two ~~run~~, no stabilization would be necessary. But if a new plug-in is connected, the system is reinitialized and then there is a time to stabilization.		If there were no change between two runs, no stabilization would be necessary. But if a new plug-in is connected, the system is reinitialized and then there is a time to stabilization.