|
|
| Line 15: |
Line 15: |
| The monitor runs its analyses on a specific processor (DSP) allowing a totally independent computation for the regular analyses. | | The monitor runs its analyses on a specific processor (DSP) allowing a totally independent computation for the regular analyses. |
|
| |
|
| Note: Clicking on the bottom right icon ( | | Note: Clicking on the bottom right icon ([[Image:Reports_Tools_Ribbons_379.png]]) opens the monitor plug-in properties dialog allowing a full access to all the settings. |
| [[Image:Reports_Tools_Ribbons_379.png]] | |
| ) opens the monitor plug-in properties dialog allowing a full access to all the settings. | |
|
| |
|
| *
| | [[NVGate_Monitor_Plug_In|Read monitor page for more details.]] |
| [[Image:Reports_Tools_Ribbons_380.png|framed|none]] | |
| Inputs: Opens the channels sources selection. Allows choosing which input or track is monitored. Up to 4 ch at a time. The channel sources can be swapped at any time without influence on the other signal processing (analysis, record, play-back) of the instrument.
| |
| ''See Chapter 1 ASB - § Monitor and waterfall/ Monitor for details''
| |
| | |
| *
| |
| [[Image:Reports_Tools_Ribbons_381.png|framed|none]]
| |
| Average decay: Setup the exponential spectrum average decay of the FFT part.
| |
| *
| |
| [[Image:Reports_Tools_Ribbons_382.png|framed|none]]
| |
| Overall analysis: Opens the statistical extraction setting. This dialog set up the filter characteristics and the averaging of the extracted values (DC, RMS, Min/Max, Kurtosis)
| |
| *
| |
| [[Image:Reports_Tools_Ribbons_383.png|framed|none]]
| |
| Filter: Allows applying the filter (Tick on) or bypassing it (No Tick). The Bypass is immediate without delay.
| |
| ''See Chapter 1 ASB - § Monitor and waterfall/ Monitor for details''
| |
|
| |
|
| =====Time Domain Analysis group (Optional)===== | | =====Time Domain Analysis group (Optional)===== |